2 layers106.7 × 116.8 mm
2 layers116.8 × 106.7 mm
zuoye
- Size
- 116.8 × 106.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 63
- Pads
- 242
- Tracks, vias
- 665, 62
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 1 Oct 2022
- Updated
- 26 Oct 2022
Overview
-1 is an open-source printed circuit board by CYT-ks, from the CYT-ks/-1 repository on GitHub. It is a 2-layer board of 116.8 × 106.7 mm with 51 parts on 63 nets, routed with 665 tracks and 62 vias.
It is built around the STM32F103C8T6, CH340E and TJA1051T/3/1, with the AD8400ARZ50 among its other parts. Its parts include 19 capacitors, 11 resistors, 7 connectors, 5 ICs and 4 switches. It belongs with the STM32 boards of this library.
Main components
4
STM32F103C8T6
LQFP-48(7x7)-40℃~+85℃ 12bit 20KB 2V~3.6V 32 Bit 37 64KB 72MHz ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
CH340E
MSOP-10150uA 20mA 2Mbps 3.3V、5V Transceiver USB 2.0 MSOP-10 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersTJA1051T/3/1
-- CAN Transceivers ROHSNXP SemiconductorsCAN Transceivers
AD8400ARZ50
SOIC-8-40℃~+125℃ 1 125kHz 2.7V~5.5V 256 500ppm/℃ 50kΩ Linear SPI Soft reset ±30% SOIC-8 Digital Potentiometers ROHSAnalog DevicesDigital Potentiometers
README
README.md-1
git+C+kicad6.0 作业+考核
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C16, C17, C18, C19 |
| 4 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1, SW2, SW3, SW4 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R4, R5 |
| 3 | 1K | Resistor_SMD:R_0603_1608Metric | R6, R7, R8 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3 |
| 3 | R | Resistor_SMD:R_0603_1608Metric | R9, R10, R11 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C1, C3 |
| 2 | 18p | Capacitor_SMD:C_0603_1608Metric | C14, C15 |
| 1 | Package_TO_SOT_SMD:TSOT-23 | Q1 | |
| 1 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 | |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 12M | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | AD8400ARZ50 | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | CH340E | Package_SO:MSOP-10_3x3mm_P0.5mm | U3 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Conn_01x02 | Connector_JST:JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal | J3 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | Conn_01x19 | Connector_PinHeader_2.54mm:PinHeader_1x19_P2.54mm_Vertical | J4 |
| 1 | Conn_01x20 | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J5 |
| 1 | HX9193 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U1 |
| 1 | STM32F103C8T6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U4 |
| 1 | TJA1051T-3 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_Palconn_UTC16-G | J1 |
Questions
How big is the -1 PCB?
It measures 116.8 × 106.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the -1 use?
51 parts, built around the STM32F103C8T6, CH340E, TJA1051T/3/1 and AD8400ARZ50. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the -1 KiCad files?
From the CYT-ks/-1 repository on GitHub, at the commit this page was made from: the board is 第一次考核（改进版）.kicad_pcb and its schematic DigitalPotentiometer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the -1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask CYT-ks before reusing the design.
Similar boards
- 2 layers40 × 40 mm
- 2 layers58.7 × 34.3 mm
- 2 layers58.7 × 34.3 mm
- 2 layers60 × 31 mm
Usb bridge
Tai-Min/Robo-Bus
Modular series of MCUs and hardware boards designed for robotics, providing a unified bus system for seamless and reliable communication between robotic components
61 parts - 2 layers57 × 52 mm
PCB Design Übung
BenWeckend/STM32F103-Board-Design
STM32 Board Design + Firmware + Desktop App
66 parts - 4 layers100 × 94 mm
- 2 layers133 × 98 mm
Precharge
michaelruppe/FSAE
Projects for Formula SAE Electric Vehicle competition (Australia 2019/2020)
121 parts59MIT