Skip to the content
2 layers96.5 × 67.3 mmFX3-LA, the printed circuit board in 3D

A simple PCB to make the Cypress Semiconductor EZ-USB FX3 SuperSpeed Explorer Kit (CYUSB3KIT-003) suitable for use as a 16-channel, 100 MSps logic analyzer.

Size
96.5 × 67.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
34
Pads
186
Tracks, vias
183, 28
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
10 Oct 2021
Updated
11 Oct 2021

Overview

FX3-LA is an open-source printed circuit board by cyrozap, from the cyrozap/fx3-logic-analyzer-board repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 96.5 × 67.3 mm with 9 parts on 34 nets, routed with 183 tracks and 28 vias.

It is built around the 74LVC541APW. Its parts include 3 connectors and 2 ICs. It belongs with the sensors and measurement boards of this library.

Main components

1

README

README.md

FX3 Logic Analyzer Board

Introduction

This is a simple expansion board for the Cypress FX3 SuperSpeed Explorer Kit (CYUSB3KIT-003) that turns it into a 16-channel, 100 MSps logic analyzer.

Features

  • 16 input channels.
  • 100 MSps maxumim sample rate.
  • Supports logic levels of 1V8 and higher.
  • 5V tolerant inputs.
  • Connector pinout compatible with the Digilent Analog Discovery and the Analog Devices ADALM2000.
    • Cables can be purchased here, but the pin header has a standard 0.1 inch (2.54 mm) pitch, so any 0.1 inch pitch "dupont wire"/breadboard jumper wires will work.
  • Design suitable for manufacturing with budget/hobbyist PCB services.
    • 2 layers
    • 8-mil (0.2032 mm) minimum trace/space
    • 8-mil (0.2032 mm) minimum annular ring
    • 12-mil (0.3048 mm) minimum drill

Images

A render of the front side of the PCB. A render of the back side of the PCB.

Errata

v0.1

  • While the current design works, the return paths for the signal traces could use some improvement. Specifically, there should be ground paths routed either alongside or below each of the signal paths.
  • The input connector pinout should be labeled on the silkscreen.
  • The FX3 dev kit is a really tight fit, so the pin headers likely need to be moved a little closer together.
  • There currently isn't any kind of termination on the inputs, so sometimes for very fast signals the logic analyzer probe wires end up acting like stub wires and degrade the signal to the point that the Device Under Test (DUT) doesn't work properly.

License

This project is released under the Creative Commons Zero Public Domain Dedication, so please feel free to use or modify it however you like.

Parts

9
QtyValueFootprintReferences
274LVC541APWPackage_SO:TSSOP-20_4.4x6.5mm_P0.65mmU1, U2
2Conn_02x20_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_VerticalJ2, J3
1Conn_02x15_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x15_P2.54mm_VerticalJ1

The 5 most common of 9 parts.

Similar boards

  • 2 layers100 × 100 mmNESPICO RevB, the printed circuit board in 3D

    NESPICO RevB

    spaghetti-computer/lasagna

    Status: schematic ERC 0 violations. PCB 100x100 mm, 2 layers, parts placed, NOT ROUTED (499 unconnected items). Freerouting 2.1.0 left about 271 nets unrouted after 4 passes. Do not order from fab/ yet.

    106 parts
  • 2 layers150 × 150 mmMainBorad, the printed circuit board in 3D

    MainBorad

    wakimizufu/TBSEQ

    235 parts
  • 2 layers103 × 30.5 mmTS Back Endcap, the printed circuit board in 3D

    TS Back Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    9 parts1.3kMIT
  • 2 layers31.8 × 47.6 mmNGC 38 connector, the printed circuit board in 3D

    NGC 38 connector

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    9 parts1.2k
  • 2 layers24 × 27.3 mmExpansion Card Retrofit, the printed circuit board in 3D

    Expansion Card Retrofit

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    9 parts1.1kCC-BY-4.0
  • 2 layers15.6 × 17.3 mmSKR Mini TFT Thermistor Board, the printed circuit board in 3D

    SKR Mini TFT Thermistor Board

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    9 parts1.1kGPL-3.0
  • 2 layers39.1 × 49.5 mmLearnoliver, the printed circuit board in 3D

    Learnoliver

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    9 parts915
  • 2 layers17.4 × 16.9 mmToolhead, the printed circuit board in 3D

    Toolhead

    tanaes/whopping_Voron_mods

    9 parts787GPL-3.0

Questions

How big is the FX3-LA PCB?

It measures 96.5 × 67.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the FX3-LA use?

9 parts, built around the 74LVC541APW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the FX3-LA KiCad files?

From the cyrozap/fx3-logic-analyzer-board repository on GitHub, at the commit this page was made from: the board is FX3-LA.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the FX3-LA design in my own project?

Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).