2 layers252.2 × 111.8 mm
2 layers238.6 × 95.3 mm
41 1350 pcb
cyril279/keyboards74- Size
- 238.6 × 95.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 134
- Nets
- 103
- Pads
- 621
- Tracks, vias
- 518, 129
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Mar 2021
- Updated
- 1 Jul 2022
Overview
41 1350 pcb is an open-source printed circuit board by cyril279, from the cyril279/keyboards repository on GitHub, published under the MIT licence. It is a 2-layer board of 238.6 × 95.3 mm with 134 parts on 103 nets, routed with 518 tracks and 129 vias.
Its parts include 2 switches, 1 resistor, 1 IC and 1 transistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdOne42 | low-profile 42-key Wireless
choc-v2 & v1 switches, MX-spaced, integrated/onboard nrf52840 controller
rev41l2 / 41-1353 | low-profile Reviung41 variant
choc-v2 & v1 switches, MX-spaced
rev41lp / 41-1350 | low-profile Reviung41 variant
choc-v1 switches, choc-spaced, hotswap, single-color backlit
Parts
134| Qty | Value | Footprint | References |
|---|---|---|---|
| 41 | D | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D_A0, D_A1, D_A2, D_A3, D_A4, D_A5, D_B0, D_B1, D_B2, D_B3, D_B4, D_B5, D_C0, D_C1, D_C2, D_C3 +25 |
| 41 | R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R_A0, R_A1, R_A2, R_A3, R_A4, R_A5, R_B0, R_B1, R_B2, R_B3, R_B4, R_B5, R_C0, R_C1, R_C2, R_C3 +25 |
| 41 | SW_Push | keeblib:PG1350_socket_smdLed | SwA0, SwA1, SwA2, SwA3, SwA4, SwA5, SwB0, SwB1, SwB2, SwB3, SwB4, SwB5, SwC0, SwC1, SwC2, SwC3 +25 |
| 1 | 4.7k 0204 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R80 |
| 1 | AO3416 N-channel MOSFET | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Battery_Cell | keeblib:cell_pads | BT01 |
| 1 | Choc | keeblib:Kailh-PG1350-2uStabilizer | Kailh PG1350 |
| 1 | ProMicro | keeblib:ArduinoProMicro | U1 |
| 1 | SW_Push | keeblib:alps_sksn | SW02 |
| 1 | SW_SPDT | keeblib:switch_SSSS811101 | SW01 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP01 |
| 1 | rev41lp_edgecutPCB | keeblib:rev41lp_edgecutPCB | rev41lp_edgecutPCB |
The 132 most common of 134 parts.
More from cyril279/keyboards
4
Similar boards
- 2 layers82 × 54.5 mm
- 2 layers100 × 100 mm
- 2 layers228 × 114 mm
- 2 layers169.3 × 128 mm
PSU PCB
ThomasVDD/SmartSupply
SmartSupply is a digital battery powered lab powersupply. It is Arduino compatible and can be controlled via PC over USB.
134 parts96 - 2 layers304 × 133.5 mm
- 2 layers80.6 × 146.7 mm
- 2 layers100 × 80 mm
Panel
richardeoin/ax
This repository contains hardware and software for the AX5043 and AX5243 radios from AxSemi (now ON Semiconductor). They are probably the same die, but the AX5243 has fewer pins.
134 parts48 - 2 layers214.3 × 140.5 mm
Questions
How big is the 41 1350 pcb PCB?
It measures 238.6 × 95.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 41 1350 pcb use?
134 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 41 1350 pcb KiCad files?
From the cyril279/keyboards repository on GitHub, at the commit this page was made from: the board is revlp/41_1350/41_1350_pcb/41_1350_pcb.kicad_pcb and its schematic one42/one42_cover/one42_matrix.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 41 1350 pcb design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).