2 layers19 × 34.9 mm
2 layers32.4 × 29.8 mm
PiTransceiver
cyosp/CYTHS1A 433 MHz Temperature and Humidity Solution
- Size
- 32.4 × 29.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 13
- Pads
- 26
- Tracks, vias
- 49, 3
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 16 Mar 2016
- Updated
- 9 Aug 2024
Overview
PiTransceiver is an open-source printed circuit board by cyosp, from the cyosp/CYTHS repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 32.4 × 29.8 mm with 11 parts on 13 nets, routed with 49 tracks and 3 vias.
Its parts include 2 resistors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdCYTHS
A 433 MHz Temperature and Humidity Solution
This project is divided in several parts:
- A sensor which measures and sends temperature and humidity
-
A hardware part connected to a Raspberry Pi in order to:
- Receive sensors information
- Drive RSL switch connected to electric heaters
-
A software part hosted by the Raspberry Pi which:
-
Drives RSL switches
-
Stores sensors data received
-
Allow to schedule RSL switches change
-
Allow to associate and dissociate switches
-
Hardware requirement
CYTHS works on Raspberry Pi
It has been tested on models:
-
Which was used during development phase
-
On this board Bluetooth has been added and connected to default UART
To have it working you need:
-
Disable Bluetooth to restore default UART
bash echo -e "\n# Disable Bluetooth to restore default UART\ndtoverlay=pi3-disable-bt\n" | sudo tee --append /boot/config.txt > /dev/null -
Stop Bluetooth service
bash sudo systemctl disable hciuart -
Make sure you have
console=ttyAMA0in/boot/cmdline.txt -
And reboot system:
sudo reboot
-
License
CYTHS is released under the BSD 3-Clause License.
See the bundled LICENSE.md for details.
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | Pin_Headers:Pin_Header_Straight_1x01 | , , , , | |
| 2 | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R1, R2 | |
| 1 | LEDs:LED-5MM | ||
| 1 | ATTINY85-S | Power_Integrations:PDIP-8 | IC1 |
| 1 | RF_Receiver_433_MHz | Sensors:RF_Receiver_433_MHz | RF2 |
| 1 | RF_Transmitter_433_MHz | Sensors:RF_Transmitter_433_MHz | RF1 |
More from cyosp/CYTHS
1Similar boards
- 2 layers60 × 30 mm
Controller
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
11 parts3kApache-2.0 - 2 layers103 × 30.5 mm
- 2 layers26 × 30 mm
Expansion Card
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
11 parts1.1kCC-BY-4.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
11 parts1kGPL-3.0 - 2 layers10 × 20 mm
2 connector Sensor Board
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
11 parts915 - 2 layers
- 2 layers47 × 33 mm
Sevensegment led display module
tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!
11 parts803MIT - 2 layers42.5 × 36.8 mm
Devboard
basilfx/TRADFRI-Hacking
Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
11 parts743CC-BY-4.0
Questions
How big is the PiTransceiver PCB?
It measures 32.4 × 29.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PiTransceiver use?
11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PiTransceiver KiCad files?
From the cyosp/CYTHS repository on GitHub, at the commit this page was made from: the board is hardware/piTransceiver/V1.0/KiCad/piTransceiver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PiTransceiver design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).