
LV3-Dash
cyfinfaza/RSC-LV3-Dash
Hardware design for Rutgers Solar Car LV3 system dashboard, with STM32H743, parallel RGB display, backlight driver, 5-48V, CAN-FD, SD card, and I2S/SAI

Hardware design for Rutgers Solar Car LV3 Core board
LV3-Core is an open-source printed circuit board by cyfinfaza, from the cyfinfaza/RSC-LV3-Core repository on GitHub. It is a 2-layer board of 114.3 × 57.2 mm with 92 parts on 100 nets, routed with 902 tracks and 103 vias.
It is built around the TJA1051T/3/1, RKB2SJM250SMTRLFS and FTSH-105-01-L-DV-K-A-P, with the PESD2USB3UV-TR and SRU1063A-4R7Y among its other parts. Its parts include 29 capacitors, 24 resistors, 13 diodes, 10 connectors and 5 ICs. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C5, C6, C9, C10, C11, C12, C13, C15, C16, C18, C19, C20, C27 |
| 8 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C8, C14, C17, C23, C26, C28, C29 |
| 6 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R9 |
| 5 | 120 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7, R15, R18, R24 |
| 4 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R10, R13, R14 |
| 4 | 50 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16, R17, R19, R20 |
| 4 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D9, D10, D11, D12 |
| 3 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J3, J7, J10 |
| 3 | D_Schottky | Diode_SMD:D_SMA | D3, D4, D6 |
| 3 | RKB2SJM250SMTR_LFS | SamacSys_Parts:RKB2SJM250SMTRLFS | S1, S2, S3 |
| 2 | 2.2u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C24, C25 |
| 2 | 22u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C21, C22 |
| 2 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21, R23 |
| 2 | 6.8p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | Conn_01x05_Pin | Connector_Molex:Molex_Micro-Fit_3.0_43650-0515_1x05_P3.00mm_Vertical | J5, J6 |
| 2 | D_Zener | Diode_SMD:D_SOD-323_HandSoldering | D2, D5 |
| 2 | LED_RGB | LED_SMD:LED_RGB_5050-6 | D7, D8 |
| 2 | SLW-864587-2A-RA-N-D | SamacSys_Parts:SLW8645872ARAND | S4, S5 |
| 2 | TJA1051T-3 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2, U3 |
| 1 | 100m | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12 |
| 1 | 17.4k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | 2.2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22 |
| 1 | Conn_01x02_Pin | Connector_Molex:Molex_Micro-Fit_3.0_43650-0215_1x02_P3.00mm_Vertical | J9 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Conn_01x40_Socket | Connector_PinSocket_2.54mm:PinSocket_1x40_P2.54mm_Horizontal | J4 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | D_Schottky | Diode_SMD:D_SOD-123F | D13 |
| 1 | FTSH-105-01-L-DV-K-A | SamacSys_Parts:FTSH-105-XX-YYY-DV-K-A | J8 |
| 1 | Fuse | Fuse:Fuseholder_Blade_Mini_Keystone_3568 | F1 |
| 1 | LMR51625YDDCR | SamacSys_Parts:SOT95P280X110-6N | U4 |
| 1 | L_Ferrite | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | PESD2USB3UV | Package_TO_SOT_SMD:SOT-23W | D1 |
| 1 | Polyfuse | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F2 |
| 1 | SRU1063A-4R7Y | Inductor_SMD:L_Bourns-SRU1028_10.0x10.0mm | L2 |
| 1 | STM32G474RCTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | TLV74033PDBVR | SamacSys_Parts:SOT95P280X145-5N | U5 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |

cyfinfaza/RSC-LV3-Dash
Hardware design for Rutgers Solar Car LV3 system dashboard, with STM32H743, parallel RGB display, backlight driver, 5-48V, CAN-FD, SD card, and I2S/SAI




Astrid-Delestine/Remote-Access-Desktop-Terminal
All project requirements are listed in ./projreq.md


callumsnowden/emfkart
A "go-kart" made from aluminium extrusion using hoverboard parts & an ODrive for propulsion.

It measures 114.3 × 57.2 mm and has 2 copper layers, 1.6 mm thick.
92 parts, built around the TJA1051T/3/1, RKB2SJM250SMTRLFS, FTSH-105-01-L-DV-K-A-P and PESD2USB3UV-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the cyfinfaza/RSC-LV3-Core repository on GitHub, at the commit this page was made from: the board is LV3-Core.kicad_pcb and its schematic CAN_Channel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask cyfinfaza before reusing the design.