2 layers100 × 100 mm
Sync ope
cyberboy666/sync_ope
effect send + sync restoring circuit - adapted from a gael jaton design
78 parts52
2 layers100 × 40 mm
Rupture
cyberboy666/_rupture_42simple analog video glitch circuit - adapted from a karl klomp design
- Size
- 100 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 28
- Pads
- 117
- Tracks, vias
- 163, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 19 Jul 2021
- Updated
- 28 Sep 2026
Overview
Rupture is an open-source printed circuit board by cyberboy666, from the cyberboy666/_rupture_ repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 40 mm with 32 parts on 28 nets, routed with 163 tracks and 0 vias.
It is built around the AD8072JN. Its parts include 9 switches, 8 capacitors, 3 connectors, 2 resistors and 2 ICs.
Main components
1README
panel/eurorack_panel/readme.mdrupture eurorack_panel notes
- the mounting holes fit m3 screws
- the front_panel mounts to pcb with 8mm standoffs
- this circuit is powered by 5v on 2.1_barrel_jack - a vertical jack soldered to bottom of pcb will allow powering from within eurorack case
- the small slide switches are possible but a bit more difficult to reach with a front panel on
- this panel is 8HP
- the default potentiometers in underscores BOMs have 12mm shaft lengths - consider replacing these with >17mm shaft length alternatives if you plan to use it with a panel
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | SPDT | lib_fp:spdt_slide_switch_small_tayda | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 |
| 4 | 1k_pot | lib_fp:pot_vertical_9mm | RV1, RV2, RV3, RV4 |
| 2 | rca | lib_fp:tht_rca_vertical | J1, J2 |
| 1 | 0.01uf | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C1 |
| 1 | 0.047uf | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C2 |
| 1 | 0.1uf | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C3 |
| 1 | 0.47u | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C7 |
| 1 | 0.68u | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C4 |
| 1 | 100uf | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C6 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 1uf | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C5 |
| 1 | 2.2uf | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C8 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | AD8072 | lib_fp:DIP-SOIC-8 | U2 |
| 1 | Barrel_Jack_Switch | lib_fp:BarrelJack_Horizontal | J3 |
| 1 | LM317_3PinPackage | Package_TO_SOT_THT:TO-92L_HandSolder | U1 |
The 28 most common of 32 parts.
Questions
How big is the Rupture PCB?
It measures 100 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rupture use?
32 parts, built around the AD8072JN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rupture KiCad files?
From the cyberboy666/_rupture_ repository on GitHub, at the commit this page was made from: the board is hardware/_rupture_.kicad_pcb and its schematic panel/back_panel/back_panel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rupture design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers100 × 40 mm
Workshop project
cyberboy666/kicad_video_workshop
an interactive kicad workshop for diy video-art making instruments
30 parts3GPL-3.0 - 2 layers50 × 23.2 mm
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
32 parts1kGPL-3.0 - 2 layers136.8 × 54.2 mm
Retropie zero
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
32 parts915 - 2 layers
- 2 layers16 × 20 mm
ESPKey
octosavvi/ESPKey
Wiegand data logger, replay device and micro door-controller
32 parts353GPL-2.0 - 2 layers82 × 40.9 mm
Display7447
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
32 parts269 - 2 layers40 × 38 mm
Shield
murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.
32 parts192MIT