Skip to the content
2 layersTiny FM transmitter, the printed circuit board in 3D
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
11
Pads
37
Tracks, vias
529, 10
Routed
Yes
KiCad
KiCad 4
Created
22 Feb 2018
Updated
22 Feb 2018

Overview

Tiny FM transmitter is an open-source printed circuit board by cyber-murmel, from the cyber-murmel/Tiny-FM-transmitter repository on GitHub, published under the MIT licence. It is a 2-layer board with 14 parts on 11 nets, routed with 529 tracks and 10 vias.

It is built around the MAX2606EUT. Its parts include 5 capacitors, 3 resistors, 2 ICs and 1 inductor.

Main components

1

README

README.md

Tiny-FM-transmitter

top

BOM

Every passive component is 0805.

ReferenceValueShop Link
R1, R2, R31k
RV110k 3*3Taobao
C1, C21uFTaobao
C3, C4, C51nF NP0Taobao
L1390nHTaobao
U1MAX2606Taobao
U2AP2204K-2.8Taobao
MK1PMO-4530PN-47UQ or equivalentTaobao
BT1Keystone 3034Taobao

Parts

14
QtyValueFootprintReferences
31kResistors_SMD:R_0603_HandSolderingR1, R2, R3
31nFCapacitors_SMD:C_0603_HandSolderingC3, C4, C5
21uFCapacitors_SMD:C_0603_HandSolderingC1, C2
110kPotentiometers:Potentiometer_Trimmer-EVM3ERV1
1390nHInductors_SMD:L_0603_HandSolderingL1
1AP2204K-2.8TO_SOT_Packages_SMD:SOT-23-5_HandSolderingU2
1Battery_CellBattery_Holders:Keystone_3034_1x20mm-CoinCellBT1
1MAX2606TO_SOT_Packages_SMD:SOT-23-6_HandsolderingU1
1Microphone_CondenserTiny FM transmitter:HM4522P-423-GMK1

Similar boards

  • 2 layers30 × 30 mmBug, the printed circuit board in 3D

    Bug

    korandiz/fmtx

    Miniature FM Transmitter

    53 parts1
  • 2 layers44 × 47 mmElepajaradio, the printed circuit board in 3D

    Elepajaradio

    kankkueo/rf_transmitter

    The project is very low power and thus legal, but be aware of your local laws and regulations!

    32 parts
  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0

Questions

What parts does the Tiny FM transmitter use?

14 parts, built around the MAX2606EUT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tiny FM transmitter KiCad files?

From the cyber-murmel/Tiny-FM-transmitter repository on GitHub, at the commit this page was made from: the board is src/Tiny FM transmitter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tiny FM transmitter design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).