
Periphery 5 drivers
CVL-THM/LibreCNC
A board designed to hold an arduino nano, a potentiometer and control up to 5 pwm fans

A board designed to hold an arduino nano, a potentiometer and control up to 5 pwm fans
Fan control is an open-source printed circuit board by CVL-THM, from the CVL-THM/LibreCNC repository on GitHub, published under the MIT licence. It is a 2-layer board of 48 × 80 mm with 17 parts on 30 nets, routed with 66 tracks and 3 vias.
Its parts include 6 connectors, 1 capacitor and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.

A board designed to hold an arduino nano, a potentiometer and control up to 5 pwm fans
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 1 | 100µF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | Arduino_Nano_Every | Module:Arduino_Nano | A1 |
| 1 | Connect VIN Switch | Button_Switch_THT:SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm | SW1 |
| 1 | EXT POWER SCREW | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J6 |
| 1 | FAN_1 | Connector:FanPinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | FAN_2 | Connector:FanPinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | FAN_3 | Connector:FanPinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | FAN_4 | Connector:FanPinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | FAN_5 | Connector:FanPinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | LOGO | logos:THM Logo | G*** |
| 1 | LOGO | logos:ITI Logo | G*** |
| 1 | LOGO | logos:OHS Logo | G*** |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Piher_PC-16_Single_Vertical | RV1 |

CVL-THM/LibreCNC
A board designed to hold an arduino nano, a potentiometer and control up to 5 pwm fans

CVL-THM/LibreCNC
A board designed to hold an arduino nano, a potentiometer and control up to 5 pwm fans



hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…


It measures 48 × 80 mm and has 2 copper layers, 1.6 mm thick.
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CVL-THM/LibreCNC repository on GitHub, at the commit this page was made from: the board is fan-control/fan-control.kicad_pcb and its schematic arduino-uno-connector/arduino-uno-connector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).