4 layers100 × 100 mm
Central ECU
UC-Aerospace/Hybrid25_ECU
The central ECU is pretty simple and carries out a couple of tasks. Firstly is comms which is easy to see with CAN on the left and RS422 on the right of the schematic.
180 parts1
2 layers40 × 75 mm
LIR2032 Battery Charger
curiousmindsdev/LIR2032_Battery_Charger4USB-C coin cell battery charger for charging 4 LIR2032
- Size
- 40 × 75 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 29
- Pads
- 134
- Tracks, vias
- 186, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Jul 2020
- Updated
- 21 Jul 2020
Overview
LIR2032 Battery Charger is an open-source printed circuit board by curiousmindsdev, from the curiousmindsdev/LIR2032_Battery_Charger repository on GitHub, published under the MIT licence. It is a 2-layer board of 40 × 75 mm with 40 parts on 29 nets, routed with 186 tracks and 0 vias.
It is built around the XT4051K421KR-G and CTS05S40,L3F. Its parts include 11 resistors, 8 capacitors, 6 diodes, 4 ICs and 1 connector. It belongs with the power boards of this library.
Main components
2
XT4051K421KR-G
SOT-553-5-40℃~+85℃ 1 107mA 25uA 4.25V~6.5V 4.2V Charging IC Constant current charging、Constant voltage charging、Trickle charging、Automatic recharge、Charge termination、Programmable charging current、Soft-start、Under-voltage lockout Lithium Battery Not supported Not supported SOT-553-5 Battery Management ROHSNATLINEARBattery Management
CTS05S40,L3F
CST-21 Independent 2A 40V 500mA 50uA@40V 600mV@500mA CST-2 Schottky Diodes ROHSToshibaSchottky Diodes
README
README.mdLIR2032 Battery Charger
USB-C coin cell battery charger for charging 4 LIR2032
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C11, C12, C21, C22, C31, C32, C41, C42 |
| 5 | 1K | Resistor_SMD:R_0402_1005Metric | R3, R11, R21, R31, R41 |
| 4 | 15K | Resistor_SMD:R_0402_1005Metric | R12, R22, R32, R42 |
| 4 | CHRG | LED_SMD:LED_0402_1005Metric | D11, D21, D31, D41 |
| 4 | LIR2032 | Footprints:CR2032_Plastic_Battery_Holder | BT1, BT2, BT3, BT4 |
| 4 | XT4051K421KR | Footprints:SOT-553 | U1, U2, U3, U4 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 1 | 500mA | Fuse:Fuse_0402_1005Metric | F1 |
| 1 | CTS05S40 | Footprints:CST2 | D1 |
| 1 | LOGO | Footprints:CMD_Logo(10x5mm)_FMask | G*** |
| 1 | PWR | LED_SMD:LED_0402_1005Metric | D2 |
| 1 | USB-C | Footprints:USB-C_Connector | J1 |
The 36 most common of 40 parts.
Similar boards
- 4 layers65 × 50 mm
- 2 layers139.7 × 73.7 mm
- 2 layers149.4 × 177.4 mm
Lightsculpture
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
40 parts915 - 2 layers150 × 50 mm
EleLab v2 Bus150
Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
40 parts531GPL-3.0 - 2 layers66.4 × 48.1 mm
Raspberry
Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!
40 parts456 - 2 layers44 × 44 mm
- 2 layers90.8 × 53.3 mm
Questions
How big is the LIR2032 Battery Charger PCB?
It measures 40 × 75 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LIR2032 Battery Charger use?
40 parts, built around the XT4051K421KR-G and CTS05S40,L3F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LIR2032 Battery Charger KiCad files?
From the curiousmindsdev/LIR2032_Battery_Charger repository on GitHub, at the commit this page was made from: the board is Rev.1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LIR2032 Battery Charger design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).