Skip to the content
2 layers34.2 × 54.2 mmRobot badge v2, the printed circuit board in 3D

KiCAD files for a couple of simple Learn-to-solder flashing LED badges. Done for Nottingham Hackspace.

Size
34.2 × 54.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
8
Pads
30
Tracks, vias
108, 3
Routed
Yes
KiCad
KiCad 3
Created
23 Aug 2014
Updated
23 Aug 2014

Overview

Robot badge v2 is an open-source printed circuit board by curiouselectric, from the curiouselectric/LearnToSolderBadge repository on GitHub, published under the MIT licence. It is a 2-layer board of 34.2 × 54.2 mm with 15 parts on 8 nets, routed with 108 tracks and 3 vias.

Its parts include 4 resistors, 4 diodes, 2 capacitors, 2 transistors and 1 connector. It belongs with the lEDs and displays and robots and motor control boards of this library.

README

README.md

LearnToSolderBadge

KiCAD files for a couple of simple Learn-to-solder flashing LED badges. Done for Nottingham Hackspace. The KiCAD projects are available and also the gerber files for PCB production.

There are two versions of the learn to solder badge:

Circle Badge - a simple circular PCB. Robot Badge - a robot shaped PCB with surface mount options.

There are also notes and datasheets on the parts required and where to get them from.

These were designed by Matt Little (matt@re-innovation.co.uk) for doing soldering workshops at Nottingham Hackspace.

Parts

15
QtyValueFootprintReferences
210kSM1206R2, R3
2470SM1206R1, R4
247uSM1206C1, C2
2LEDLED-1206D3, D4
2NPN_S0323SOT323Q1, Q2
1BATTERYBatt_conn_20mm_largepadBT1
1CONN_11pin_badge_no_edgeP1
1LED_SMDLED-1206D2
1LED_THLED-5MM_larg_padD1
1ROBOTrobotRB1

Similar boards

  • 2 layers19 × 76 mmSub, the printed circuit board in 3D

    Sub

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    15 parts3kApache-2.0
  • 2 layers26.7 × 62.2 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    15 parts1kGPL-3.0
  • 2 layers100 × 44 mmVideoslot, the printed circuit board in 3D

    Videoslot

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    15 parts1k
  • 2 layers91 × 51 mmBusinessCard, the printed circuit board in 3D

    BusinessCard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    15 parts915
  • 2 layers24.3 × 57.9 mmFlosspods pro flex, the printed circuit board in 3D

    Flosspods pro flex

    kenp-io/not-for-airpods-repairs

    The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.

    15 parts609WTFPL
  • 2 layers20.3 × 15.2 mmL0 Load, the printed circuit board in 3D

    L0 Load

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    15 parts546MIT
  • 2 layers68 × 50 mmEleLab v2 PowerFeed, the printed circuit board in 3D

    EleLab v2 PowerFeed

    Chrismettal/EleLab_v2

    Cheap DIY lab system for hobbyists and the tinkering folk

    15 parts531GPL-3.0
  • 2 layers50.8 × 35.6 mmInterface, the printed circuit board in 3D

    Interface

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    15 parts454

Questions

How big is the Robot badge v2 PCB?

It measures 34.2 × 54.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Robot badge v2 use?

15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Robot badge v2 KiCad files?

From the curiouselectric/LearnToSolderBadge repository on GitHub, at the commit this page was made from: the board is Robot Badge/robot_badge_v2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Robot badge v2 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).