Skip to the content
2 layers59.9 × 54.9 mmDC Power Monitor, the printed circuit board in 3D

This is a breakout board for the ISL28022 DC Power monitoring IC with I2C

Size
59.9 × 54.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
12
Pads
70
Tracks, vias
350, 74
Pours
10
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
21 Nov 2020
Updated
17 Feb 2026

Overview

DC Power Monitor is an open-source printed circuit board by curiouselectric, from the curiouselectric/ISL28022_breakout repository on GitHub, published under the MIT licence. It is a 2-layer board of 59.9 × 54.9 mm with 21 parts on 12 nets, routed with 350 tracks and 74 vias.

It is built around the ISL28022FUZ. Its parts include 9 connectors, 6 resistors, 5 capacitors and 1 IC.

Main components

1

README

README.md

ISL28022_breakout

This is a breakout board for the ISL28022 DC Power monitoring IC with I2C

The ISL28022 from Renesas has a datasheet available here: https://www.renesas.com/us/en/products/amplifiers-buffers/all-amplifiers/digital-power-monitors/device/ISL28022.html

It is a DC power monitoring IC, which measures current and voltage and calculates power. The data is read at either 14 or 15 bit resolution. Data can be obtained via an I2C connection.

The maximum voltage is 60V DC and the current can be up to 320mV measured across a current shunt.

This folder contains the PCB design files for a simple break out board which can be connected to a microcontroller of your choice.

It is available to buy here: https://www.curiouselectric.co.uk/

Parts

21
QtyValueFootprintReferences
3470RREInnovationFootprint:SM0805R3, R4, R5
210nREInnovationFootprint:SM_C_0805C4, C5
24.7kREInnovationFootprint:SM0805R1, R2
2DATAREInnovationFootprint:SIL-4_Grove_Labelled_CorrectJ1, J2
1100nREInnovationFootprint:SM_C_0805C1
11uREInnovationFootprint:SM_R_1206C3
12.2uREInnovationFootprint:SM_R_1206C2
1ID_A0REInnovationFootprint:SM_SOLDER_ID_4_WAYJ3
1ID_A1REInnovationFootprint:SM_SOLDER_ID_4_WAYJ4
1INPUTREInnovationFootprint:TH_SIL-2_screw_terminal_32A_LARGEJ8
1ISL28022REInnovationFootprint:MSOP10-0.5U1
1LOGO1CuriousElectric3:2019_011_16_CuriousElectricCompany_Logo_Round_Logo_No_words_KiCAD_10mm_PCBLogoJ6
1LOGO2CuriousElectric3:TCEC_Words_13mmJ7
1OUTPUTREInnovationFootprint:TH_SIL-2_screw_terminal_32A_LARGEJ9
1PCBREInnovationFootprint:PCB_60x55_outlineJ5
1R_SHUNTmatts_components:Rshunt_universalR6

Similar boards

  • 4 layers65 × 35 mmFlexiBMS, the printed circuit board in 3D

    FlexiBMS

    SimosMCmuffin/FlexiBMS_hardware

    Open Source BMS developed by Simo Sihvonen (Simos MCmuffin) with the Esk8 community, for the Esk8 community

    209 parts14
  • 4 layers130 × 125 mmFlatburn V5, the printed circuit board in 3D

    Flatburn V5

    MIT-Senseable-City-Lab/flatburn-lte

    Part of the City Scanner project at MIT Senseable City Lab, Flatburn is an open-source, solar-powered, modular sensing platform that can be easily deployed on road vehicles to collect various environmental data.

    587 parts1MIT
  • 2 layers28.3 × 39.8 mmLevelShifter, the printed circuit board in 3D

    LevelShifter

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    21 parts5.1kGPL-3.0
  • 2 layers171.2 × 72.9 mmAmiga gfxcard before pour, the printed circuit board in 3D

    Amiga gfxcard before pour

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    21 parts1k
  • 2 layers93.9 × 46 mmRectifier, the printed circuit board in 3D

    Rectifier

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    21 parts990GPL-3.0
  • 2 layers45.5 × 42.9 mmEsphome han reader, the printed circuit board in 3D

    Esphome han reader

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    21 parts915
  • 2 layers31.8 × 14.5 mmEsp prog, the printed circuit board in 3D

    Esp prog

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    21 parts744MIT
  • 2 layers23.5 × 15.8 mmQuiverAttachPCB, the printed circuit board in 3D

    QuiverAttachPCB

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    21 parts617CERN-OHL-S-2.0

Questions

How big is the DC Power Monitor PCB?

It measures 59.9 × 54.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the DC Power Monitor use?

21 parts, built around the ISL28022FUZ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the DC Power Monitor KiCad files?

From the curiouselectric/ISL28022_breakout repository on GitHub, at the commit this page was made from: the board is ISL28022_breakout_PCB/DC_Power_Monitor.kicad_pcb and its schematic ISL28022_breakout_PCB/DC_Power_Monitor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the DC Power Monitor design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).