Skip to the content
2 layers47 × 59 mmGitcard, the printed circuit board in 3D

A custom PCB based "emniii😞😞" card that lets you play a version of Flappy Bird

Size
47 × 59 mm
Copper layers
2
Thickness
1.6 mm
Parts
48
Nets
48
Pads
130
Tracks, vias
607, 70
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
6 Aug 2026
Updated
25 Aug 2026

Overview

Gitcard is an open-source printed circuit board by cubistmind, from the cubistmind/__pCennnBeist repository on GitHub. It is a 2-layer board of 47 × 59 mm with 48 parts on 48 nets, routed with 607 tracks and 70 vias.

It is built around the MKE04Z8VFK4. Its parts include 19 resistors, 18 diodes, 2 capacitors, 1 IC and 1 connector.

Main components

1

README

gitcard_finalversion/readme.md

PCB gitcard -stuckatprototype

https://github.com/user-attachments/assets/f05b40d1-0cd9-4672-8ce3-ce2a0b937675

A custom PCB based "emniii😞😞" card that lets you play a version of Flappy Bird

Project Structure

The project consists of

  1. Firmware
  2. Hardware
  3. Mechanical
  4. Scripts

These are structured into their own files. I could have used submodules, but decided against it.

1. Firmware

This lives on the ESP32 soon the necessary firmware files will be included here

2. Hardware

Schematic

PDF schematic included for your viewing pleasure.

PCBs

All the gerber files you'd need to send to a fab house.

Kicad

All the files you'd need to expand and work on this further. If you'd like.

3. Mechanical

Enclosure

All the step files you need to make one of these. Extrusion printer works well for this part.

4. Scripts

soon it will be added🥲

Requirements

A bunch of pip packages

What the project could use

  1. Cleanup, but thats true for almost anything out there
  2. A proper graphics library -- Adafruit, or even LVGL
  3. Scripts that would show stock data. anyone?

If you take it further

Let me know if you ever make one of these, I'd love to see it. Seriously, that'd be exciting and inspiring to keep making my projects open source!

Known issues

  1. Switch requires to be shorted due to power consumption at run time
  2. GPIO 1 as is does not allow the device to wake up from sleep
  3. The LEDs seem to be pulling a lot power even when ESP32 is in deep sleep mode

Special Thanks

Thanks to Michael Angerer for his open sourced esp32_ble_ota project. I used it to get BLE running in this project. His blog post and github repo are a great resource. Check it out. https://github.com/micha

Parts

48
QtyValueFootprintReferences
18300Resistor_SMD:R_0603_1608MetricR1, R2, R3, R4, R5, R6, R7, R10, R11, R12, R13, R14, R15, R16, R17, R18 +2
18LEDLED_SMD:LED_0603_1608MetricD1, D2, D3, D4, D5, D6, D7, D10, D11, D12, D13, D14, D15, D16, D17, D18 +2
4MountingHole_PadMountingHole:MountingHole_2.2mm_M2_ISO7380_Pad_TopBottomH1, H2, H3, H4
10.1uFCapacitor_SMD:C_0603_1608MetricC2
110kResistor_SMD:R_0603_1608MetricR19
12.2UfCapacitor_SMD:C_0603_1608MetricC1
12468Battery:BatteryHolder_MPD_BA9VPC_1xPP3BT1
1Conn_01x05_SocketConnector_PinHeader_1.27mm:PinHeader_1x05_P1.27mm_VerticalJ2
1LOGOMy ART:penguineG***
1MKE04Z8VFK4My ART:MKE04Z8VFK4U1
1SWITCHButton_Switch_THT:SW_PUSH_6mmS1

More from cubistmind/__pCennnBeist

2
  • 2 layers57.5 × 85.5 mmGitcard final version, the printed circuit board in 3D

    Gitcard final version

    cubistmind/__pCennnBeist

    A custom PCB based "emniii😞😞" card that lets you play a version of Flappy Bird

    307 parts
  • 2 layers46.5 × 43.5 mmXl4015-buck converter, the printed circuit board in 3D

    Xl4015-buck converter

    cubistmind/__pCennnBeist

    A custom PCB based "emniii😞😞" card that lets you play a version of Flappy Bird

    18 parts

Similar boards

  • 4 layers33 × 54.3 mmBusinessCard OG, the printed circuit board in 3D

    BusinessCard OG

    StuckAtPrototype/PCB_business_card_original

    A custom PCB based "business" card that lets you play a version of Flappy Bird.

    44 parts53Apache-2.0
  • 2 layersDemo, the printed circuit board in 3D

    Demo

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    48 parts547GPL-3.0
  • 2 layers18.8 × 18.1 mmAmoeba royale, the printed circuit board in 3D

    Amoeba royale

    mtl/keyboard-pcbs

    Keyboard PCBs

    48 parts485
  • 2 layers48.1 × 115.6 mmAPU ENG CRANK PANEL, the printed circuit board in 3D

    APU ENG CRANK PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    48 parts431
  • 2 layers106 × 55 mmEndcap, the printed circuit board in 3D

    Endcap

    softerhardware/Hermes-Lite2

    A second generation low-cost amateur HF software defined radio transceiver.

    48 parts384
  • 2 layers42.8 × 88 mm18650 pcb, the printed circuit board in 3D

    18650 pcb

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    48 parts253GPL-3.0
  • 2 layers34 × 44 mmClk lo buffer, the printed circuit board in 3D

    Clk lo buffer

    loxodes/vna

    Under development open hardware microwave vector network analyzer

    48 parts205

Questions

How big is the Gitcard PCB?

It measures 47 × 59 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Gitcard use?

48 parts, built around the MKE04Z8VFK4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Gitcard KiCad files?

From the cubistmind/__pCennnBeist repository on GitHub, at the commit this page was made from: the board is gitcard_prototype/gitcard.kicad_pcb and its schematic gitcard_finalversion/LED_Display.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Gitcard design in my own project?

Its repository states no licence, so its author keeps all rights: ask cubistmind before reusing the design.