2 layers60 × 126.6 mm
V3 Connector + IRLED
PiTracLM/PiTrac
Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)
151 parts439GPL-2.0
2 layers352 × 130.7 mm
the ogre ergo keyboard
- Size
- 352 × 130.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 151
- Nets
- 100
- Pads
- 1,158
- Tracks, vias
- 930, 62
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Jun 2019
- Updated
- 25 Jul 2019
Overview
Ogre is an open-source printed circuit board by ctrlShiftBryan, from the ctrlShiftBryan/ogre repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 352 × 130.7 mm with 151 parts on 100 nets, routed with 930 tracks and 62 vias.
Its parts include 70 diodes, 4 ICs and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdogre
the ogre ergo keyboard
Parts
151| Qty | Value | Footprint | References |
|---|---|---|---|
| 70 | D_Small | Keebio-Parts:Diode-dual | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +54 |
| 55 | MX-NoLED | Keebio:MX_PCB_100H | MX1, MX2, MX10, MX11, MX12, MX13, MX14, MX16, MX17, MX18, MX19, MX20, MX22, MX23, MX24, MX25 +39 |
| 9 | MX-NoLED | Keebio:MX_PCB_125H | MX57, MX61, MX64, MX66, MX70, MX71, MX72, MX73, MX74 |
| 3 | MX-NoLED | Keebio:MX_PCB_225H | MX44, MX55, MX65 |
| 2 | MX-NoLED | Keebio:MX_PCB_150H | MX15, MX28 |
| 2 | MX-NoLED | Keebio:MX_PCB_175H | MX29, MX42 |
| 2 | ProMicro | Keebio:ArduinoProMicro | U2, U3 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW2, SW3 |
| 2 | TRRS | Keebio:TRRS-PJ-320A | U21, U31 |
| 1 | MX-NoLED | Keebio-Parts:MX_PCB_100H | MX21 |
| 1 | MX-NoLED | Keebio:MX_PCB_200H | MX63 |
| 1 | MX-NoLED | Keebio:MX_PCB_275H | MX62 |
| 1 | ogre4-cut-2 | ogre:ogre4-cut-2 | ogre4-cut |
Questions
How big is the Ogre PCB?
It measures 352 × 130.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ogre use?
151 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ogre KiCad files?
From the ctrlShiftBryan/ogre repository on GitHub, at the commit this page was made from: the board is ogre/ogre.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ogre design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers285 × 94.2 mm
- 2 layers250 × 10 mm
Rgbwstrip120 250
cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
151 parts114 - 2 layers96.3 × 95.9 mm
- 2 layers130 × 120 mm
- 2 layers56 × 95 mm
- 2 layers101.6 × 147.3 mm
Karabas pro revC1
andykarpov/karabas-pro
FPGA based retrocomputer with FDD and HDD controllers
151 parts37MIT - 2 layers242.3 × 75.4 mm
