
Cho corne ice
ctrlShiftBryan/crkbd-ogre
The Corne keyboard is a split keyboard with 3x6 column staggered keys and 3 thumb keys, based on Helix. Crkbd stands for Corne Keyboard.

The Corne keyboard is a split keyboard with 3x6 column staggered keys and 3 thumb keys, based on Helix. Crkbd stands for Corne Keyboard.
Corne chocolate is an open-source printed circuit board by ctrlShiftBryan, from the ctrlShiftBryan/crkbd-ogre repository on GitHub, published under the MIT licence. It is a 2-layer board of 114.8 × 91.4 mm with 60 parts on 46 nets, routed with 1,128 tracks and 142 vias.
Its parts include 18 diodes, 18 switches, 2 resistors, 2 connectors and 1 IC. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
The Corne keyboard is a split keyboard with 3x6 column staggered keys and 3 thumb keys, based on Helix. Crkbd stands for Corne Keyboard.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | D | kbd:D3_SMD | D2, D3, D4, D5, D6, D10, D11, D12, D14, D15, D16, D17, D18, D19, D20, D21 +2 |
| 17 | SW_PUSH | kbd:Choc_Hotswap | SW2, SW3, SW4, SW5, SW6, SW8, SW10, SW11, SW12, SW14, SW15, SW16, SW17, SW18, SW19, SW20 +1 |
| 8 | kbd:Jumper | JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9 | |
| 7 | kbd:LEGO_HOLE | , , , , , , | |
| 2 | LOGO | kbd:corne | G***, G*** |
| 2 | R | kbd:R | R1, R2 |
| 2 | i2c-pin | kbd:1pin_conn | P1, P2 |
| 1 | OLED | kbd:OLED | OLED |
| 1 | ProMicro | kbd:ProMicro_v2 | U1 |
| 1 | Reset | kbd:ResetSW | RSW1 |
| 1 | SW_PUSH | kbd:Choc_Hotswap_1.5u | SW21 |

ctrlShiftBryan/crkbd-ogre
The Corne keyboard is a split keyboard with 3x6 column staggered keys and 3 thumb keys, based on Helix. Crkbd stands for Corne Keyboard.

ctrlShiftBryan/crkbd-ogre
The Corne keyboard is a split keyboard with 3x6 column staggered keys and 3 thumb keys, based on Helix. Crkbd stands for Corne Keyboard.



sd2psx/pcb
The PCB must be produced in 0.8mm thickness. Production files are provided under the "Releases" tab. These do not include the through-hole OLED module.





BitDogLab/BitDogLab
Open-source educational hardware for embedded systems, programming, electronics, and physical computing.
It measures 114.8 × 91.4 mm and has 2 copper layers, 1.6 mm thick.
60 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ctrlShiftBryan/crkbd-ogre repository on GitHub, at the commit this page was made from: the board is nice-rev/pcb/corne-chocolate.kicad_pcb and its schematic cho-corne-ice/pcb/cho-corne-ice.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).