2 layers96.6 × 82.8 mm
2 layers
PCB taller de electronica
ctalero/smart-potThe typical problems one might experience while running the code is: 1°- The Dht11 module is not connected properly. 2°- The Oled Screen is not connected properly.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 34
- Pads
- 66
- Tracks, vias
- 136, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 8 Sep 2023
- Updated
- 1 Dec 2023
Overview
PCB taller de electronica is an open-source printed circuit board by ctalero, from the ctalero/smart-pot repository on GitHub. It is a 2-layer board with 13 parts on 34 nets, routed with 136 tracks and 0 vias.
It is built around the DHT11. Its parts include 2 resistors, 2 ICs and 2 connectors. It belongs with the ESP32 boards of this library.
Main components
1README
README.mdsmart-pot
The files needed for the project to work are the "ssd1306.py" which is the library that controls the oled screen, and the "main.py" file which has all the principal functions of the whole circuit.
The typical problems one might experience while running the code is: 1°- The Dht11 module is not connected properly. 2°- The Oled Screen is not connected properly. 3°- The ssid and the password weren't being declared properly.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x02_Socket | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | Batt1, MicroUSB1, pushButton1, Switch |
| 2 | Conn_01x01_Socket | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | LDR+, LDRPin1 |
| 2 | R | OptoDevice:R_LDR_5.0x4.1mm_P3mm_Vertical | R1, R2 |
| 1 | Conn_01x04_Socket | Connector:FanPinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | DHT11 | Connector:FanPinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | ESP32 | ESP32-DEVKIT-V1:MODULE_ESP32_DEVKIT_V1 | U1 |
| 1 | MH-CD42 | cd42:mh-cd42 | U2 |
| 1 | SSD1306 | SSD1306:128x64OLED | Brd1 |
Similar boards
- 2 layers100 × 50 mm
Conveyor belt pcb
lansidev/conveyor-belt
Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi
22 parts9MIT - 2 layers93 × 20 mm
- 2 layers
OpenMQTTGatewayPCB
ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project
36 parts7GPL-3.0 - 2 layers62 × 19.3 mm
SniffingTrinket
GeorgK/SniffingTrinket
A room climate monitor using the Adafruit Trinket Pro
23 parts6GPL-3.0 - 2 layers
Arduino relay
bhaskar9980/Guardian
Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.
58 parts5MIT - 2 layers100 × 43.5 mm
Firefly
Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.
33 parts5GPL-3.0 - 2 layers30.5 × 77.5 mm
Proyecto sensor temperatura
unla-investigacion-desarrollo/ecosistema-iot
Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:
8 parts5
Questions
What parts does the PCB taller de electronica use?
13 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB taller de electronica KiCad files?
From the ctalero/smart-pot repository on GitHub, at the commit this page was made from: the board is Diseño PCB/PCB taller de electronica.kicad_pcb and its schematic Diseño PCB/PCB taller de electronica.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB taller de electronica design in my own project?
Its repository states no licence, so its author keeps all rights: ask ctalero before reusing the design.