2 layers190.5 × 125.7 mm
Left
csun/ellipsis_split_files
PCB and Plate files for the ellipsis split https://www.csun.io/2020/06/14/ellipsis-split-buildlog.html
78 parts20
2 layers191.6 × 116.2 mm
PCB and Plate files for the ellipsis split https://www.csun.io/2020/06/14/ellipsis-split-buildlog.html
- Size
- 191.6 × 116.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 90
- Nets
- 68
- Pads
- 507
- Tracks, vias
- 410, 1
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 23 Sep 2020
- Updated
- 2 Mar 2023
Overview
Right is an open-source printed circuit board by csun, from the csun/ellipsis_split_files repository on GitHub. It is a 2-layer board of 191.6 × 116.2 mm with 90 parts on 68 nets, routed with 410 tracks and 1 via.
Its parts include 43 diodes and 37 switches.
README
README.mdKiCad files for the pcb in the pcb/ directory
dxf files for the plates in the plates/ directory. This includes files for the templates used to cut out the wrist rests.
V2 Construction Notes
The board is laid out for this specific aliexpress promicro clone. You can probably use a standard promicro, but the USB port will not be flush with the edge of the board.
The toggle switch used is the E-Switch 100SP1T2B4M6QE. TBH I'd buy a clone of this off aliexpress too and save yourself a bunch of money.
Firmware source can be found here on the ellipsis_split_v2 branch.
V1 Construction Notes
Most of the components needed for assembly should be properly labelled in the pcb files. The screen used is this adafruit one based on the SSD1306 driver chip.
I cut wrist rests from wood using the router template included in the plates directory.
You'll also need M2 standoffs of various lengths to separate the two plates enough to fit the PCB. I think around 12mm is the minimum allowable height.
Firmware source uses QMK and can be found here
Parts
90| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | D_0 | keyboard_parts:D_SOD123_axial | D21 |
| 1 | D_7 | keyboard_parts:D_SOD123_axial | D2 |
| 1 | D_8 | keyboard_parts:D_SOD123_axial | D3 |
| 1 | D_9 | keyboard_parts:D_SOD123_axial | D16 |
| 1 | D_BSLS | keyboard_parts:D_SOD123_axial | D41 |
| 1 | D_BSPC | keyboard_parts:D_SOD123_axial | D36 |
| 1 | D_COLN | keyboard_parts:D_SOD123_axial | D28 |
| 1 | D_COMM | keyboard_parts:D_SOD123_axial | D19 |
| 1 | D_CR1 | keyboard_parts:D_SOD123_axial | D4 |
| 1 | D_CR2 | keyboard_parts:D_SOD123_axial | D5 |
| 1 | D_CR3 | keyboard_parts:D_SOD123_axial | D6 |
| 1 | D_DOWN | keyboard_parts:D_SOD123_axial | D35 |
| 1 | D_ENT | keyboard_parts:D_SOD123_axial | D38 |
| 1 | D_FN | keyboard_parts:D_SOD123_axial | D20 |
| 1 | D_GRV | keyboard_parts:D_SOD123_axial | D1 |
| 1 | D_H | keyboard_parts:D_SOD123_axial | D9 |
| 1 | D_I | keyboard_parts:D_SOD123_axial | D17 |
| 1 | D_J | keyboard_parts:D_SOD123_axial | D13 |
| 1 | D_K | keyboard_parts:D_SOD123_axial | D18 |
| 1 | D_L | keyboard_parts:D_SOD123_axial | D23 |
| 1 | D_LBR | keyboard_parts:D_SOD123_axial | D32 |
| 1 | D_LEFT | keyboard_parts:D_SOD123_axial | D30 |
| 1 | D_M | keyboard_parts:D_SOD123_axial | D14 |
| 1 | D_MIN | keyboard_parts:D_SOD123_axial | D26 |
| 1 | D_N | keyboard_parts:D_SOD123_axial | D10 |
| 1 | D_O | keyboard_parts:D_SOD123_axial | D22 |
| 1 | D_P | keyboard_parts:D_SOD123_axial | D27 |
| 1 | D_PER | keyboard_parts:D_SOD123_axial | D24 |
| 1 | D_PLS | keyboard_parts:D_SOD123_axial | D31 |
| 1 | D_QUOT | keyboard_parts:D_SOD123_axial | D33 |
| 1 | D_RBR | keyboard_parts:D_SOD123_axial | D37 |
| 1 | D_RCTL | keyboard_parts:D_SOD123_axial | D25 |
| 1 | D_RGHT | keyboard_parts:D_SOD123_axial | D40 |
| 1 | D_RR1 | keyboard_parts:D_SOD123_axial | D42 |
| 1 | D_RR2 | keyboard_parts:D_SOD123_axial | D43 |
| 1 | D_RSFT | keyboard_parts:D_SOD123_axial | D34 |
| 1 | D_SLSH | keyboard_parts:D_SOD123_axial | D29 |
| 1 | D_TR1 | keyboard_parts:D_SOD123_axial | D7 |
| 1 | D_TR2 | keyboard_parts:D_SOD123_axial | D11 |
| 1 | D_TR3 | keyboard_parts:D_SOD123_axial | D15 |
| 1 | D_U | keyboard_parts:D_SOD123_axial | D12 |
| 1 | D_UP | keyboard_parts:D_SOD123_axial | D39 |
| 1 | D_Y | keyboard_parts:D_SOD123_axial | D8 |
| 1 | KEY_0 | keebs:Mx_Alps_100 | K21 |
| 1 | KEY_7 | keebs:Mx_Alps_100 | K2 |
| 1 | KEY_8 | keebs:Mx_Alps_100 | K3 |
| 1 | KEY_9 | keebs:Mx_Alps_100 | K16 |
| 1 | KEY_BSLS | keebs:Mx_Alps_100 | K41 |
| 1 | KEY_BSPC | keebs:Mx_Alps_150 | K36 |
| 1 | KEY_COLN | keebs:Mx_Alps_100 | K28 |
| 1 | KEY_COMM | keebs:Mx_Alps_100 | K19 |
| 1 | KEY_CR1 | keebs:Mx_Alps_100 | K4 |
| 1 | KEY_CR2 | keebs:Mx_Alps_100 | K5 |
| 1 | KEY_CR3 | keebs:Mx_Alps_100 | K6 |
| 1 | KEY_DOWN | keebs:Mx_Alps_100 | K35 |
| 1 | KEY_ENT | keebs:Mx_Alps_175 | K38 |
| 1 | KEY_FN | keebs:Mx_Alps_125 | K20 |
| 1 | KEY_GRV | keebs:Mx_Alps_100 | K1 |
| 1 | KEY_H | keebs:Mx_Alps_100 | K9 |
| 1 | KEY_I | keebs:Mx_Alps_100 | K17 |
| 1 | KEY_J | keebs:Mx_Alps_100 | K13 |
| 1 | KEY_K | keebs:Mx_Alps_100 | K18 |
| 1 | KEY_L | keebs:Mx_Alps_100 | K23 |
| 1 | KEY_LBR | keebs:Mx_Alps_100 | K32 |
| 1 | KEY_LEFT | keebs:Mx_Alps_100 | K30 |
| 1 | KEY_M | keebs:Mx_Alps_100 | K14 |
| 1 | KEY_MIN | keebs:Mx_Alps_100 | K26 |
| 1 | KEY_N | keebs:Mx_Alps_100 | K10 |
| 1 | KEY_O | keebs:Mx_Alps_100 | K22 |
| 1 | KEY_P | keebs:Mx_Alps_100 | K27 |
| 1 | KEY_PER | keebs:Mx_Alps_100 | K24 |
| 1 | KEY_PLS | keebs:Mx_Alps_100 | K31 |
| 1 | KEY_QUOT | keebs:Mx_Alps_100 | K33 |
| 1 | KEY_RBR | keebs:Mx_Alps_100 | K37 |
| 1 | KEY_RCTL | keebs:Mx_Alps_125 | K25 |
| 1 | KEY_RGHT | keebs:Mx_Alps_100 | K40 |
| 1 | KEY_RR1 | keebs:Mx_Alps_100 | K42 |
| 1 | KEY_RR2 | keebs:Mx_Alps_100 | K43 |
| 1 | KEY_RSFT | keebs:Mx_Alps_125 | K34 |
| 1 | KEY_SLSH | keebs:Mx_Alps_100 | K29 |
The 80 most common of 90 parts.
Questions
How big is the Right PCB?
It measures 191.6 × 116.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Right use?
90 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Right KiCad files?
From the csun/ellipsis_split_files repository on GitHub, at the commit this page was made from: the board is pcb/v2/right.kicad_pcb and its schematic pcb/v2/left.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Right design in my own project?
Its repository states no licence, so its author keeps all rights: ask csun before reusing the design.
More from csun/ellipsis_split_files
2- 2 layers175.7 × 116.2 mm
Left
csun/ellipsis_split_files
PCB and Plate files for the ellipsis split https://www.csun.io/2020/06/14/ellipsis-split-buildlog.html
76 parts20
Similar boards
- 2 layers75 × 75 mm
- 2 layers236.5 × 96.2 mm
Forager pcb
carrefinho/forager
34-key wireless split keyboard inspired by ZSA Voyager
90 parts426CERN-OHL-P-2.0 - 2 layers62 × 87 mm
Proto ads bee detector board
PantsForBirds/adsbee
Open Source Embedded ADS-B Receiver
90 parts344GPL-3.0 - 2 layers268 × 62 mm
- 2 layers97.5 × 59.5 mm
- 2 layers115.6 × 106.7 mm
ErgoSNM v3 left
siderakb/ergo-snm-keyboard
ErgoSNM is a split ergonomic keyboard integrated with trackball, wireless is in beta
90 parts172CERN-OHL-P-2.0 - 2 layers163 × 120 mm
Zynthian mini
zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...
90 parts156 - 2 layers219 × 96.1 mm
