Skip to the content
4 layers79.5 × 70 mmPcb v3, the printed circuit board in 3D

Slug Mobile: One Tenth Scale Autonomous Vehicle

Size
79.5 × 70 mm
Copper layers
4
Thickness
1.6 mm
Parts
13
Nets
90
Pads
134
Tracks, vias
38, 0
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
14 Jul 2024
Updated
6 Nov 2026

Overview

Pcb v3 is an open-source printed circuit board by cruz-control, from the cruz-control/Slug-Mobile repository on GitHub. It is a 4-layer board of 79.5 × 70 mm with 13 parts on 90 nets, routed with 38 tracks and 0 vias.

Its parts include 4 connectors, 2 capacitors, 2 transistors and 1 IC.

README

README.md

Slug-Mobile

Slug Mobile: One Tenth Scale Autonomous Vehicle

CARLA gym environment: https://github.com/cruz-control/carla-gym-env.git

Get Stated

Run the following command to install all the dependencies

bash
pip3 install -r requirements.txt

Next you can run main.py to start the code.

Setup Car

Sensor Mount

Here's a link to the CAD for the sensor mount: OnShape Link

Electrical System

We have included the custom power distribution board we created to the power_dist_board folder, the schematics show how to connect the different components.

Parts

13
QtyValueFootprintReferences
4, , ,
2Screw_Terminal_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_HorizontalJ3, J4
1CP_Radial_D6.3mm_P2.50mmCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC1
1Conn_01x07_SocketConnector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ2
1Conn_02x20_Odd_EvenConnector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_VerticalJ5
1~Motors:Adafruit PCA9685 rev C (1)U2
1~Cruz_Control_Footprints:CRE1S Boost ConverterQ2
1~Converter_DCDC:LC78_05-3.0Q1
1~Connector_AMASS:AMASS_XT60PW-F_1x02_P7.20mm_HorizontalC2

Similar boards

  • 4 layers31.6 × 84.1 mmMCL68, the printed circuit board in 3D

    MCL68

    MicroCoreLabs/Projects

    Ted Fried's MicroCore Labs Projects - FPGA CPU cores and emulators for the 8088, 8086, 8051, 6502, 68000, Z80, Risc-V, and also Typewriter and EPROM Emulator projects.

    13 parts534
  • 4 layers33 × 32 mmDoorman slot programmer, the printed circuit board in 3D

    Doorman slot programmer

    AzonInc/Doorman

    ESP32-S3 based Intercom Gateway (TCS / Koch / Niko / Scantron / Analogue Systems)

    13 parts252GPL-3.0
  • 4 layers25 × 20.5 mmRefclk breakout, the printed circuit board in 3D

    Refclk breakout

    loxodes/vna

    Under development open hardware microwave vector network analyzer

    13 parts205
  • 4 layers59 × 20 mmPmod mmcx, the printed circuit board in 3D

    Pmod mmcx

    azonenberg/starshipraider

    Open hardware test equipment

    13 parts193BSD-3-Clause
  • 4 layers14 × 23.2 mmQspimux2, the printed circuit board in 3D

    Qspimux2

    felixheld/qspimux

    QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests

    13 parts57CC-BY-SA-4.0
  • 4 layers18 × 16.5 mmUDB, the printed circuit board in 3D

    UDB

    Unified-Daughterboard/UDB-C-EZM

    For more details on the Unified Daughterboard project, see the main website.

    13 parts45MIT

Questions

How big is the Pcb v3 PCB?

It measures 79.5 × 70 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Pcb v3 use?

13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pcb v3 KiCad files?

From the cruz-control/Slug-Mobile repository on GitHub, at the commit this page was made from: the board is power_dist_board/pcb-v3.kicad_pcb and its schematic power_dist_board/pcb-v3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pcb v3 design in my own project?

Its repository states no licence, so its author keeps all rights: ask cruz-control before reusing the design.