
Cbc1
Croktopus/Daishi
If you just want to have a CBC1 PCB printed, you'll want to take the gerbers.zip file to your PCB fab of choice (I recommend JLCPCB for the price), as well as the gerbers.zip in the daughterboard directory.

If you just want to have a CBC1 PCB printed, you'll want to take the gerbers.zip file to your PCB fab of choice (I recommend JLCPCB for the price), as well as the gerbers.zip in the daughterboard directory.
Usb breakouts is an open-source printed circuit board by Croktopus, from the Croktopus/Daishi repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 28 × 25.5 mm with 10 parts on 9 nets, routed with 59 tracks and 5 vias.
It belongs with the interfaces and adapters boards of this library.
If you just want to have a CBC1 PCB printed, you'll want to take the gerbers.zip file to your PCB fab of choice (I recommend JLCPCB for the price), as well as the gerbers.zip in the daughterboard directory.
I've also got all the KiCad files in here if you want to play around with making your own modifications.
Once you have your PCB (unless you got it assembled for you), you get to do all the super fun SMT soldering! This is easily the worst part of the process IMO, but you can get through it in a few hours. If you haven't done this before, look up some youtube tutorials before you decide whether you want to.
Then you can tune your stabs, crimp a cable, and solder some switches (I recommend following Nathan Kim's guide for stabilizers, just without the band-aid mod).
Obviously this is super light on details, but...anything in here that you don't know how to do, just look it up. If you're still having trouble understanding something, I can answer some questions, but there are some fairly deep topics in here that already have great educational resources (EEVBlog for soldering, https://github.com/ruiqimao/keyboard-pcb-guide for KiCad, Nathan Kim's vids and streams for keeb building).
But that's pretty much the gist of it for getting a functional PCB for your Daishi build.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_2.2mm_M2 | Mounting_Holes:MountingHole_2.2mm_M2 | M2, M2, M2, M2 |
| 2 | 5.1K | Resistors_SMD:R_0805_HandSoldering | R_USB1, R_USB2 |
| 1 | 1M | Resistors_SMD:R_0805_HandSoldering | R_SHIELD1 |
| 1 | 4.7n | Capacitors_SMD:C_0805_HandSoldering | C_SHIELD1 |
| 1 | Conn_01x04 | keyboard_parts:Pin_Header_Angled_1x04_Pitch2.54mm_centered | J1 |
| 1 | HRO-TYPE-C-31-M-12 | Type-C:HRO-TYPE-C-31-M-12-HandSoldering | USB1 |

Croktopus/Daishi
If you just want to have a CBC1 PCB printed, you'll want to take the gerbers.zip file to your PCB fab of choice (I recommend JLCPCB for the price), as well as the gerbers.zip in the daughterboard directory.

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch


OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 28 × 25.5 mm and has 2 copper layers, 1.6 mm thick.
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Croktopus/Daishi repository on GitHub, at the commit this page was made from: the board is cbc1 pcb/usb breakout v2/usb breakouts.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).