Skip to the content
4 layers100 × 100 mmBaseBoard, the printed circuit board in 3D

Projects with Kicad

Size
100 × 100 mm
Copper layers
4
Thickness
1.61 mm
Parts
53
Nets
121
Pads
394
Tracks, vias
645, 97
Pours
10
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
31 Aug 2022
Updated
27 Aug 2026

Overview

BaseBoard is an open-source printed circuit board by cristobalcuevas, from the cristobalcuevas/PCB-Designs repository on GitHub. It is a 4-layer board of 100 × 100 mm with 53 parts on 121 nets, routed with 645 tracks and 97 vias.

It is built around the RS485. It belongs with the computers and single-board computers and interfaces and adapters boards of this library.

Main components

1

README

README.md

Kicad

Projects with Kicad

HornSystem

LoRaPill

PIC18F4550

Shield ESP32

Parts

53
QtyValueFootprintReferences
28SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP1, JP2, JP10, JP11, JP12, JP13, JP14, JP15, JP16, JP17, JP18, JP19, JP20, JP21, JP22, JP29 +12
6SolderJumper_3_OpenJumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabelsJP23, JP24, JP25, JP26, JP27, JP28
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
13.3V_ExternalTerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_HorizontalJ9
14-20mAConnector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalJ12
15V_ExternalTerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_HorizontalJ8
1CANConnector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_VerticalJ6
1CommBoardBaseBoard:CONN_10018784-10201TLFJ3
1FotodiodeConnector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_VerticalJ7
1MainBoardBaseBoard:CONN_10018784-10201TLFJ2
1PowerBoard-1BaseBoard:CONN_10018784-10201TLFJ1
1PowerBoard-2BaseBoard:CONN_10018784-10201TLFJ4
1RS232Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_VerticalJ13
1RS422Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalJ15
1RS485Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalJ14
1SensorInConnector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalJ5
1Solar-1TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_HorizontalJ10
1Solar-2TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_HorizontalJ11

More from cristobalcuevas/PCB-Designs

12
  • 4 layers100 × 100 mmHornSystem, the printed circuit board in 3D

    HornSystem

    cristobalcuevas/PCB-Designs

    Projects with Kicad

    233 parts
  • 4 layers60 × 75 mmMixed signal, the printed circuit board in 3D

    Mixed signal

    cristobalcuevas/PCB-Designs

    Projects with Kicad

    114 parts
  • 4 layers67.8 × 83.3 mmSensorsBoard, the printed circuit board in 3D

    SensorsBoard

    cristobalcuevas/PCB-Designs

    Projects with Kicad

    106 parts
  • 4 layers100 × 100 mmPowerBoard, the printed circuit board in 3D

    PowerBoard

    cristobalcuevas/PCB-Designs

    Projects with Kicad

    105 parts
  • 4 layers51 × 30 mmLoRa, the printed circuit board in 3D

    LoRa

    cristobalcuevas/PCB-Designs

    Projects with Kicad

    80 parts
  • 4 layers100 × 100 mmCommBoard, the printed circuit board in 3D

    CommBoard

    cristobalcuevas/PCB-Designs

    Projects with Kicad

    66 parts
  • 2 layers50 × 50 mmLoRaPill, the printed circuit board in 3D

    LoRaPill

    cristobalcuevas/PCB-Designs

    Projects with Kicad

    54 parts
  • 2 layers68.6 × 53.3 mmArduino, the printed circuit board in 3D

    Arduino

    cristobalcuevas/PCB-Designs

    Projects with Kicad

    46 parts
  • 2 layers100 × 70 mmPIC18F4550, the printed circuit board in 3D

    PIC18F4550

    cristobalcuevas/PCB-Designs

    Projects with Kicad

    33 parts
  • 2 layers108 × 48.3 mmACDC switching, the printed circuit board in 3D

    ACDC switching

    cristobalcuevas/PCB-Designs

    Projects with Kicad

    30 parts
  • 2 layers42.7 × 34.5 mmSTM32F103, the printed circuit board in 3D

    STM32F103

    cristobalcuevas/PCB-Designs

    Projects with Kicad

    28 parts
  • 4 layers50.9 × 30 mmGSM, the printed circuit board in 3D

    GSM

    cristobalcuevas/PCB-Designs

    Projects with Kicad

    25 parts

Similar boards

  • 2 layers100 × 100 mmExplorer, the printed circuit board in 3D

    Explorer

    anyshake/explorer

    🌏 Detecting seismic wave using 3 geophones and 3-axis accelerometer, pack & send data to AnyShake Observer over RS232 / RS485 serial.

    266 parts100
  • 2 layers45 × 45 mmMotor, the printed circuit board in 3D

    Motor

    DizzyRobot/DirectServo

    Controller that drives BLDC motor as servo

    48 parts76
  • 8 layers163.5 × 123.5 mmYeti, the printed circuit board in 3D

    Yeti

    PionixPublic/reference-hardware

    BelayBox reference hardware

    278 parts70CERN-OHL-P-2.0
  • 2 layers63 × 46 mmPi485, the printed circuit board in 3D

    Pi485

    bvarner/pi485

    An open-source TTL UART <-> RS485 converter, intended for a Raspberry Pi or Arduino

    31 parts41MIT
  • 2 layers123 × 87.5 mmFastLOGIC, the printed circuit board in 3D

    FastLOGIC

    Neumi/fastLOGIC

    An affordable Arduino-based board designed for straightforward (industrial) logic control, ideal for building small-scale automation and control solutions.

    180 parts23MIT
  • 4 layers105 × 55 mmMotorKit, the printed circuit board in 3D

    MotorKit

    zhbi98/ODriveX

    【无刷电机FOC驱动器】双通道 FOC 无刷电机驱动套件,最高电压 60V 单通道电流可达 100A,可以驱动 1.2kW 以内 BLDC 或 PMSM(有中文注释)。

    184 parts22MIT
  • 2 layers98.9 × 91.4 mmCoin Cell Tester, the printed circuit board in 3D

    Coin Cell Tester

    tomrodinger/servomotor

    Open-source NEMA-17 integrated servomotor (motor + closed-loop driver + controller + encoder). RS-485, Python/Arduino libraries, MCP server for AI control. Hardware, firmware and software.

    204 parts17MIT
  • 4 layers80 × 100 mmTempCtrl, the printed circuit board in 3D

    TempCtrl

    charlesbaynham/DigitalTemperatureController

    Schematic, PCB and source code for a high-precision digital temperature controller

    186 parts14

Questions

How big is the BaseBoard PCB?

It measures 100 × 100 mm and has 4 copper layers, 1.61 mm thick.

What parts does the BaseBoard use?

53 parts, built around the RS485. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BaseBoard KiCad files?

From the cristobalcuevas/PCB-Designs repository on GitHub, at the commit this page was made from: the board is HornSystem/BaseBoard/BaseBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the BaseBoard design in my own project?

Its repository states no licence, so its author keeps all rights: ask cristobalcuevas before reusing the design.