Skip to the content
2 layers100 × 64.8 mmObsonet 1, the printed circuit board in 3D

Repository to host source files for the Obsonet Reloaded

Size
100 × 64.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
35
Nets
132
Pads
313
Tracks, vias
809, 55
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
15 Dec 2022
Updated
25 Sep 2026

Overview

Obsonet 1 is an open-source printed circuit board by cristianoag, from the cristianoag/obsonet repository on GitHub. It is a 2-layer board of 100 × 64.8 mm with 35 parts on 132 nets, routed with 809 tracks and 55 vias.

It is built around the RTL8019AS-LF and 74HC133D. Its parts include 9 capacitors, 7 resistors, 6 ICs, 2 diodes and 2 connectors. It belongs with the FPGA and CPLD boards of this library.

Main components

2

README

README.md

Obsonet Reloaded

alt text This is the GitHub repository to host all source files for the Obsonet Reloaded.

The ObsoNET is the first network card created for the MSX. In 2004, the hardware designer Daniel Berdugo and software developer Nestor Soriano joined forces to create a cartridge to bring ETHERNET standard to the MSX line of computers.

The cartridge is based on the Realtek RTL8019AS chip and uses a flash memory to host and execute a BIOS that allows the use of network commands from the Nextor operating system (compatible with MSXDOS). An EPROM stores basic configuration data for the RTL8019AS chip and a side connector is used to plug a network cable to your MSX. A GAL16VB is used to implement the logic required to activate and expose the cartridge to the computer.

The original version of the Obsonet was designed to fit a standard Konami cartridge case. The goal of this project is to create a new version of the cartridge that fits the standard Patola cartridge case available in Brazil as well as the standard Konami cases available from multiple vendors WW.

Hardware

PCB

The files required to build the original version of the Obsonet are available https://github.com/msx-solis/obsonet. You can download the gerber files and order from any PCB manufacturer.

I have created another version of the PCB that I called Obsonet Reloaded. The goal was to have the board fitting the standard Patola cartridge cases available in Brazil as well as the standard Konami cases available from multiple vendors WW.

Front SideBack Side
FrontBack
FrontBack

Bill of Materials

Obsonet Reloaded Interactive BOM

ReferenceValueDescriptionPackageQtdLink
C1-C4100nFC-EUC1206KC12064Ali Express
C6100 uFCPOL-EUE2.5-5E2.5-51Ali Express
C7-C1010nFC-EU050-030X075C050-030X0754Ali Express
CON2RJ45_F555153-1555153-11Ali Express
IC1M29F400MM29F400MSO441Ali Express
IC293C46_SOICAT93CX6SOIC08SOIC8 (you only need one DIP8 or SOIC8)1*Ali Express
IC374LS13374LS133DIP161Ali Express
IC4RTL8019ASRTL8019ASRTL8019AS1Ali Express
IC593C46_DILAT93CX6DIP8DIP8 (you only need one DIP8 or SOIC8)1*
IC6GAL16V8DGAL16V8DDIP201Ali Express
LED1GreenLed 3mmLED3MM1Ali Express
LED2OrangeLed 3mmLED3MM1Ali Express
Q120MHzHC49GW/HC49UHC49GW/J (or you can adapt the conventional HC49U)1Ali Express
R1,R4,R511KR-EU_R1206R12063Ali Express
R2,R3300RR-EU_R1206R12062Ali Express
R627KR-EU_R1206R12061Ali Express
R7200RR-EU_R1206R12061Ali Express
SW1SWITCHMicroswitch 6×66×6 microswitch SMD1Ali Express
TF120F001N20F001NDIL16/121Ali Express

Software

On this repo you can find all software required to build and use the Obsonet Reloaded. There are also binary files with fixes for small issues we found during the project.

BIOS

The BIOS is the software that runs on the flash memory of the cartridge. It is responsible for initializing the hardware and providing a set of functions to the Nextor operating system.

Resources

I wrote an article providing more information on how to acquire components and build the new version of the cartridge. You can check it on my blog at http://www.theretrohacker.com/2022/11/04/the-obsonet-cartridge-for-the-msx/.

I also have a video in Portuguese showing the board, software, issues we faced during the remodel project as well as showing how to use it to download and use software on your MSX. Please check it at https://www.youtube.com/watch?v=Ph_3VFheo2I

License

Open Hardware

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Original version build by Daniel Berdugo and Nestor Soriano. Reloaded version by The Retro Hacker.

  • If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • You may not use the material for commercial purposes.
  • You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

ATTENTION

This project was made for the retro community and not for commercial purposes. So only retro hardware forums and individual people can build this project.

THE SALE OF ANY PART OF THIS PROJECT WITHOUT EXPRESS AUTHORIZATION IS PROHIBITED!

Parts

35
QtyValueFootprintReferences
4100nFobsonet_1:C1206KC1, C2, C3, C4
410nFobsonet_1:C050-030X075C7, C8, C9, C10
311Kobsonet_1:R1206R1, R4, R5
2obsonet_1:LOGO_MSXU$1, U$2
2300Robsonet_1:R1206R2, R3
1obsonet_1:LOGO_OBSONETU$4
1100uFobsonet_1:E2,5-5C6
1200Robsonet_1:R1206R7
120F001Nobsonet_1:DIL16_12TF1
120MHzobsonet_1:HC49GWQ1
127Kobsonet_1:R1206R6
174HC133Package_DIP:DIP-16_W7.62mmIC3
193C46_DILobsonet_1:DIP8IC5
193C46_SOICobsonet_1:SOIC8IC2
1CART_BOARDobsonet_1:MSXCARTCON1
1GAL16V8Dobsonet_1:DIL20_SQUARE_1.5MMIC6
1GREENobsonet_1:LED3MMLED1
1LOGOCRISAG:TRHG***
1M29F400Mobsonet_1:SO44IC1
1ORANGEobsonet_1:LED3MMLED2
1RJ45_Hobsonet_1:555153-1CON2
1RTL8019ASobsonet_1:RTL8019ASIC4
1SWITCHobsonet_1:MICROPULSADOR_6X6SW1

The 33 most common of 35 parts.

Similar boards

  • 2 layers83.8 × 60.8 mmGenesis stacking 3d glasses cart, the printed circuit board in 3D

    Genesis stacking 3d glasses cart

    abzman/SMS-3D-glasses-genesis-cart-stack

    pass-through adapter to add 3d glasses support to a genesis running master system software

    31 parts1Unlicense
  • 2 layers124.5 × 87.5 mmS1VirtualFloppy, the printed circuit board in 3D

    S1VirtualFloppy

    bml3mk5/L3S1VirtualFloppy

    Virtual Floppy Card for HITACHI Basic Master Level3 / MB-S1

    71 parts
  • 4 layers126 × 140 mmVga video card, the printed circuit board in 3D

    Vga video card

    ttzytt/hardware_vga_driver

    93 parts
  • 2 layers157.4 × 74.2 mmISA8019, the printed circuit board in 3D

    ISA8019

    Manawyrm/ISA8019

    RTL8019-based ISA network card, NE2000-compatible

    56 parts129GPL-3.0
  • 4 layers239.4 × 165.7 mmMAXI030, the printed circuit board in 3D

    MAXI030

    aslak3/MAXI030

    MC68030 based expandable computer design

    222 parts38GPL-2.0
  • 2 layers100.1 × 49.9 mmRC2014-Ethernet, the printed circuit board in 3D

    RC2014-Ethernet

    Manawyrm/RC2014-Ethernet

    RTL8019 Ethernet card for the RC2014 Z80 computer

    29 parts14
  • 2 layers85.7 × 132.2 mmXt cf tandy, the printed circuit board in 3D

    Xt cf tandy

    retrotheory/tandy-XT-CF-Lite-LAN

    Tandy XT-CF-Lite LAN Rev 0.9a ReadMe ---------------------------- This is a Compact Flash HD and Realtek LAN card for the Tandy 1400. It uses the expansion slot on the rear of the Tandy to add a bootable HD.

    44 parts8GPL-3.0
  • 2 layers103.8 × 73.2 mmRTL8019, the printed circuit board in 3D

    RTL8019

    Vakon84/Chanterelle-RTL8019AS

    58 parts

Questions

How big is the Obsonet 1 PCB?

It measures 100 × 64.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Obsonet 1 use?

35 parts, built around the RTL8019AS-LF and 74HC133D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Obsonet 1 KiCad files?

From the cristianoag/obsonet repository on GitHub, at the commit this page was made from: the board is hardware/kicad/obsonet_1.kicad_pcb and its schematic hardware/kicad/obsonet_1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Obsonet 1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask cristianoag before reusing the design.