

Microsdmapper
microSDMapper Wireless for MSX Computers
- Size
- 101 × 64.6 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 109
- Pads
- 263
- Tracks, vias
- 1,077, 135
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 22 Mar 2023
- Updated
- 3 Mar 2024
Overview
Microsdmapper is an open-source printed circuit board by cristianoag, from the cristianoag/microsdmapperv1 repository on GitHub. It is a 4-layer board of 101 × 64.6 mm with 19 parts on 109 nets, routed with 1,077 tracks and 135 vias.
It is built around the HM628512LFP and LM1117MP-3.3. Its parts include 7 capacitors, 4 ICs, 1 resistor, 1 connector and 1 crystal. It belongs with the FPGA and CPLD boards of this library.
Main components
2HM628512LFP
SOP-32-11.7mmSOP-32-11.7mm New Arrivals ROHSHITUncategorisedLM1117MP-3.3
SOT-2230℃~+125℃@(Ta) 1 1.2V@(800mA) 15V 3.3V 5mA 75dB@(120Hz) 800mA 99uVrms Fixed Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3, C4, C5, C6, C7 |
| 1 | CRISAG:LOGO_MSX | LOGO_MSX | |
| 1 | 100uF | Capacitor_SMD:CP_Elec_5x4.5 | C2 |
| 1 | 25 Mhz | Crystal:Crystal_SMD_7050-4Pin_7.0x5.0mm | X1 |
| 1 | 4.7K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | HM628512 | Package_SO:SSOP-32_11.305x20.495mm_P1.27mm | IC1 |
| 1 | JTAG1A | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | JT1 |
| 1 | LM1117MP-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | LOGO | CRISAG:TRH | G*** |
| 1 | M29F010 | Package_LCC:PLCC-32_11.4x14.0mm_P1.27mm | IC2 |
| 1 | MSX_SLOT_EDGE-CON | CRISAG:msx_cartridge | BUS1 |
| 1 | Micro_SD_Card_Det1 | CRISAG:Conn_uSDcard | J1 |
| 1 | XC95144XL_TQ100 | Package_QFP:VQFP-100_14x14mm_P0.5mm | IC3 |
The 18 most common of 19 parts.
More from cristianoag/microsdmapperv1
2- 4 layers101 × 64.6 mm

- 4 layers101 × 64.6 mm

Similar boards
- 2 layers154.9 × 139.7 mm

68kBoard
transistorfet/computie
A collection of 68k computer projects, including a unix-like operating system written in C that runs on them
78 parts69GPL-3.0 - 4 layers99.3 × 88.6 mm

- 2 layers99.4 × 99.6 mm

- 2 layers154.9 × 100.3 mm

- 4 layers150 × 150 mm

Homebrew 486
mattheeewahn/MDA80486SBC_Final
크기가 너무 커서 압축파일로 올립니다. PCB로 가면 아웃풋이 있고 아웃풋에 가면 homebrew486Bcu압축파일이 있는데 그대로 캐드나 온라인 거버 뷰어에 올리시면 볼수 있습니다
130 parts1GPL-3.0 - 2 layers254 × 134.6 mm
.kicad_pcb.jpg?size=s&soon)
FPGA Z80 (no traces)
douggilliland/Retro-Computers
Retro-Computer Designs (Z80, 65C816, etc)
155 parts87 - 2 layers106.7 × 139.7 mm

Transistorfet computie 68k SMT
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
68 parts1 - 2 layers82.1 × 82.1 mm

Uncut Gem
QuantumVillage/UncutGem
A prototype Full Stack fully Open Source NV Center Diamond Magnetometer
207 parts210AGPL-3.0
Questions
How big is the Microsdmapper PCB?
It measures 101 × 64.6 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Microsdmapper use?
19 parts, built around the HM628512LFP and LM1117MP-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Microsdmapper KiCad files?
From the cristianoag/microsdmapperv1 repository on GitHub, at the commit this page was made from: the board is hardware/microsdmapper_v1.0/microsdmapper.kicad_pcb and its schematic hardware/microsdmapper_v1.0/microsdmapper.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Microsdmapper design in my own project?
Its repository states no licence, so its author keeps all rights: ask cristianoag before reusing the design.