2 layers19 × 76 mm
Sub
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
15 parts3kApache-2.0
2 layers53.8 × 42.7 mm
A PCB shield for controlling the Raptor Reloaded 3D printed prosthetic with the MyoWare EMG sensor.
- Size
- 53.8 × 42.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 17
- Pads
- 79
- Tracks, vias
- 90, 2
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 29 Aug 2016
- Updated
- 2 Sep 2016
Overview
Raptor is an open-source printed circuit board by crflemin, from the crflemin/myoraptor-controller repository on GitHub. It is a 2-layer board of 53.8 × 42.7 mm with 15 parts on 17 nets, routed with 90 tracks and 2 vias.
Its parts include 5 connectors, 4 capacitors, 3 diodes, 2 ICs and 1 fuse. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
README
kicad-pcb/README.mdmyoraptor-controller
A PCB shield for controlling the Raptor Reloaded 3D printed prosthetic with the MyoWare EMG sensor. KiCAD library references point to Wickerbox Electronics. Click here to order this board from OSH Park!
Board Previews
(Courtesy of OSH Park)
Bill of Materials
| Ref | Quantity | Digikey Part Number | Manufacturer Part Number | Description |
|---|---|---|---|---|
| U2 | 1 | 296-9911-5-ND | SN754410NE | IC HALF-H DRVR QUAD 16-DIP |
| J2, J4 | 2 | ED10561-ND | OSTVN02A150 | CONN TERM BLOCK 2.54MM 2POS PCB |
| J3 | 1 | OSTVN03A150 | OSTVN03A150 | CONN TERM BLOCK 2.54MM 3POS PCB |
| D1 | 1 | SMAJ14A-FDICT-ND | SMAJ14A-13-F | TVS DIODE 14VWM 23.2VC SMA |
| U1 | 1 | NCP1117LPST50T3GOSCT-ND | NCP1117LPST50T3G | IC REG LDO 5V 1A SOT223 |
| F1 | 1 | MF-MSMF110/24X-2CT-ND | MF-MSMF110/24X-2 | FUSE PTC RESET 1.10A SMD 1812 |
| D2, D3 | 2 | SS12-E3/61TGICT-ND | SS12-E3/61T | DIODE SCHOTTKY 20V 1A DO214AC |
| C4 | 1 | 490-1519-1-ND | GRM188R71H104KA93D | CAP CER 0.1UF 50V X7R 0603 |
| C3 | 1 | 490-5307-1-ND | GRM188R71E105KA12D | CAP CER 1UF 25V X7R 0603 |
| C1, C2 | 2 | 490-7202-1-ND | GRM188R61E106MA73D | CAP CER 10UF 25V X5R 0603 |
| J1 | 1 | Teensy 3.2 |
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10uF 25V | Wickerlib:RLC-0603-SMD | C1, C2 |
| 2 | 20V 1A | Wickerlib:DIODE-SMA | D2, D3 |
| 2 | CONN-TERM-SCREW-GREEN-2.54MM-2POS-TH | Wickerlib:CONN-ONSHORE-SCREW-GREEN-2PIN-TH | J2, J4 |
| 1 | 0.1uF | Wickerlib:RLC-0603-SMD | C4 |
| 1 | 1.1A 25V | Wickerlib:RLC-1812-SMD | F1 |
| 1 | 14V | Wickerlib:DIODE-SMA | D1 |
| 1 | 1uF | Wickerlib:RLC-0603-SMD | C3 |
| 1 | BARREL_JACK | Wickerlib:CONN-BARREL-JACK-2.5x5.5MM-TH | CON1 |
| 1 | CONN-TERM-SCREW-GREEN-2.54MM-3POS-TH | Wickerlib:CONN-ONSHORE-SCREW-GREEN-3PIN-TH | J3 |
| 1 | NCP1117ST50T3G | Wickerlib:SOT-223 | U1 |
| 1 | SN754410PDIP | Wickerlib:DIP-16-W7.62MM-LONGPADS | U2 |
| 1 | TEENSY3.2-72MHz | Wickerlib:TEENSY-3.2-NOSILK | J1 |
Questions
How big is the Raptor PCB?
It measures 53.8 × 42.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Raptor use?
15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Raptor KiCad files?
From the crflemin/myoraptor-controller repository on GitHub, at the commit this page was made from: the board is kicad-pcb/raptor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Raptor design in my own project?
Its repository states no licence, so its author keeps all rights: ask crflemin before reusing the design.
Similar boards
- 2 layers26.7 × 62.2 mm
Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
15 parts1kGPL-3.0 - 2 layers100 × 44 mm
Videoslot
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
15 parts1k - 2 layers91 × 51 mm
BusinessCard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
15 parts915 - 2 layers24.3 × 57.9 mm
Flosspods pro flex
kenp-io/not-for-airpods-repairs
The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.
15 parts609WTFPL - 2 layers20.3 × 15.2 mm
L0 Load
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
15 parts546MIT - 2 layers68 × 50 mm
EleLab v2 PowerFeed
Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
15 parts531GPL-3.0 - 2 layers50.8 × 35.6 mm
