2 layers52.2 × 52.2 mm
Base
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
43 parts3kApache-2.0
2 layers121 × 70 mm
ChargeGuard Pro Plus ECE411
creid89/ECE411_Group_Project1A repository for our PSU ECE411 Practicum Project
- Size
- 121 × 70 mm
- Copper layers
- 2
- Thickness
- 1.67 mm
- Parts
- 43
- Nets
- 45
- Pads
- 108
- Tracks, vias
- 266, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 4 Oct 2024
- Updated
- 12 Dec 2024
Overview
ChargeGuard Pro Plus ECE411 is an open-source printed circuit board by creid89, from the creid89/ECE411_Group_Project repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 121 × 70 mm with 43 parts on 45 nets, routed with 266 tracks and 0 vias.
Its parts include 15 connectors, 14 resistors, 2 transistors and 1 diode. It belongs with the ESP32 boards of this library.
README
README.mdECE411_Group_Project
A repository for our PSU ECE411 Practicum Project
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R8, R9, R10, R11, R12, R13, R14 |
| 3 | 4.7k | Resistor_SMD:R_1206_3216Metric | R1, R2, R5 |
| 1 | 1N5819 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 1k | Resistor_SMD:R_1206_3216Metric | R4 |
| 1 | 2.7k | Resistor_SMD:R_1206_3216Metric | R7 |
| 1 | 26 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R6 |
| 1 | 2N3906 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | 2N7000 | Package_TO_SOT_THT:TO-92_Inline | Q3 |
| 1 | 3.3V | Connector_Pin:Pin_D1.0mm_L10.0mm | TP6 |
| 1 | 5V(+) | Connector_Pin:Pin_D1.0mm_L10.0mm | TP2 |
| 1 | 5V(-) | Connector_Pin:Pin_D1.0mm_L10.0mm | TP1 |
| 1 | 8.2k | Resistor_SMD:R_1206_3216Metric | R3 |
| 1 | Adafruit_Feather_HUZZAH32_ESP32 | Module:Adafruit_Feather | A1 |
| 1 | BAT | Connector_Pin:Pin_D1.0mm_L10.0mm | TP8 |
| 1 | Barrel_Jack_MountingPin | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J1 |
| 1 | Battery | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type101_RT01602HBWC_1x02_P5.08mm_Horizontal | J15 |
| 1 | Buck Converter (12V) | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type101_RT01602HBWC_1x02_P5.08mm_Horizontal | J2 |
| 1 | Buck Converter (5V output) | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type101_RT01602HBWC_1x02_P5.08mm_Horizontal | J3 |
| 1 | Fan | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type101_RT01602HBWC_1x02_P5.08mm_Horizontal | J5 |
| 1 | GND | Connector_Pin:Pin_D1.0mm_L10.0mm | TP5 |
| 1 | OLED I2C | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type101_RT01602HBWC_1x02_P5.08mm_Horizontal | J14 |
| 1 | OLED Power | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type101_RT01602HBWC_1x02_P5.08mm_Horizontal | J13 |
| 1 | Power PB | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type101_RT01602HBWC_1x02_P5.08mm_Horizontal | J7 |
| 1 | Power Switch | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type101_RT01602HBWC_1x02_P5.08mm_Horizontal | J4 |
| 1 | Protection jumper | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | JP1 |
| 1 | Relay Module Logic | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type055_RT01503HDWU_1x03_P5.00mm_Horizontal | J8 |
| 1 | Relay Module Power | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type055_RT01503HDWU_1x03_P5.00mm_Horizontal | J9 |
| 1 | Reset Switch | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type101_RT01602HBWC_1x02_P5.08mm_Horizontal | J6 |
| 1 | SCL | Connector_Pin:Pin_D1.0mm_L10.0mm | TP4 |
| 1 | SDA | Connector_Pin:Pin_D1.0mm_L10.0mm | TP3 |
| 1 | Sensor I2C | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type101_RT01602HBWC_1x02_P5.08mm_Horizontal | J12 |
| 1 | Sensor Power | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type101_RT01602HBWC_1x02_P5.08mm_Horizontal | J11 |
| 1 | Solenoid | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type101_RT01602HBWC_1x02_P5.08mm_Horizontal | J10 |
| 1 | VD | Connector_Pin:Pin_D1.0mm_L10.0mm | TP7 |
| 1 | Via | Connector_Pin:Pin_D1.0mm_L10.0mm | TP9 |
Questions
How big is the ChargeGuard Pro Plus ECE411 PCB?
It measures 121 × 70 mm and has 2 copper layers, 1.67 mm thick.
What parts does the ChargeGuard Pro Plus ECE411 use?
43 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ChargeGuard Pro Plus ECE411 KiCad files?
From the creid89/ECE411_Group_Project repository on GitHub, at the commit this page was made from: the board is Schematics/ChargeGuard_Pro_Plus_ECE411/ChargeGuard_Pro_Plus_ECE411.kicad_pcb and its schematic Schematics/ChargeGuard_Pro_Plus_ECE411/ChargeGuard_Pro_Plus_ECE411.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ChargeGuard Pro Plus ECE411 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers146.1 × 49.5 mm
Breakout 121pin 368255-2-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
43 parts1.2k - 2 layers33 × 34 mm
- 2 layers96.1 × 78.6 mm
EYEBROW WARNING INDICATOR RIGHT
jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository
43 parts431 - 2 layers42.9 × 19 mm
- 2 layers99.1 × 99.7 mm
RC6502 Prototyping
tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!
43 parts193GPL-3.0 - 2 layers26.6 × 38.7 mm
Mdb slave esp32s3-mini
nodestark/mdb-esp32-cashless
ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT
43 parts190MIT - 2 layers97.3 × 71 mm
ZynScreen v1
zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...
43 parts156