crehmann/Sharp-Memory-LCD-Breakout17See the BOM csv file in the release zip-file for LCSC part numbers
SharpMemoryLcdBreakout PANELIZED is an open-source printed circuit board by crehmann, from the crehmann/Sharp-Memory-LCD-Breakout repository on GitHub. It is a 2-layer board of 62 × 42 mm with 46 parts on 10 nets, routed with 400 tracks and 88 vias.
It is built around the FH12-10S-0.5SH(55). Its parts include 12 capacitors, 12 connectors and 8 resistors.
| Name | Qty | Package | Value | Description |
|---|---|---|---|---|
| FB1, FB2 | 2 | 0805 | 300mΩ DC Resistance, 600Ω impedance @ 100MHz | Ferrite Bead |
| C1 | 1 | 0603 | 560pF/680pF | Capacitor |
| C2, C3 | 2 | 0603 | 1uF | Capacitor |
| R1/R2 | 1 | 0603 | 10kΩ | Use either R1 or R2. Use R2 when VCOM toggling via EXTCOMIN pin (EIN) is used. |
| J3 | 1 | SMD | FH12-10S-0.5SH | FPC connector with 10 pins and 0.5mm pitch |
| LS011B7DH03 Display | 1 | - | https://aliexpress.com/item/1005001809102193.html |
See the BOM csv file in the release zip-file for LCSC part numbers
Note: The current revision v0.3 is not tested. v0.2 was using wrong capacitor values but the schematic worked otherwise (see picture).
Assembly: Soldering by hand is doable. The pads for the components are larger for easier soldering. However, for the FPC connecter good equipment and routine is required as it has a pitch of only 0.5mm
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10kΩ | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R1, R1, R1, R2, R2, R2, R2 |
| 8 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C2, C2, C2, C3, C3, C3, C3 |
| 8 | Ferrite_Bead | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1, FB1, FB1, FB1, FB2, FB2, FB2, FB2 |
| 6 | VAL** | SharpMemoryLcdBreakout:mouse-bite-2mm-slot | mouse-bite-2mm-slot, mouse-bite-2mm-slot, mouse-bite-2mm-slot, mouse-bite-2mm-slot, mouse-bite-2mm-slot, mouse-bite-2mm-slot |
| 4 | 560pF/680pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C1, C1, C1 |
| 4 | EMD | TestPoint:TestPoint_Pad_D1.5mm | J2, J2, J2, J2 |
| 4 | FH12-10S-0.5SH | Connector_FFC-FPC:Hirose_FH12-10S-0.5SH_1x10-1MP_P0.50mm_Horizontal | J3, J3, J3, J3 |
| 4 | Pin Header | SharpMemoryLcdBreakout:PinSocket_2Row_5+3_P2.54mm_Vertical | J1, J1, J1, J1 |
It measures 62 × 42 mm and has 2 copper layers, 1.6 mm thick.
46 parts, built around the FH12-10S-0.5SH(55). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the crehmann/Sharp-Memory-LCD-Breakout repository on GitHub, at the commit this page was made from: the board is PCB/SharpMemoryLcdBreakout/SharpMemoryLcdBreakout-PANELIZED.kicad_pcb and its schematic PCB/SharpMemoryLcdBreakout/SharpMemoryLcdBreakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask crehmann before reusing the design.
vyquocvu/analog-ai-chip
This directory contains the editable KiCad 10 source for the 70 mm × 52 mm, four-layer Pager-1 main carrier. The display, keypad, protected Li-Po pack, and analog accelerator are external assemblies.
wildjames/smart_compass
The product is going to be something similar to the compass in the Pirates of the Caribbean.
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
