2 layers229.5 × 95.1 mm
Sweep high
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
55 parts2.1k
2 layers18 × 49.5 mm
PSU Plus
CrazyGadgetMods/PSU-Plus15Power Board for Wii Micros
- Size
- 18 × 49.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 55
- Nets
- 29
- Pads
- 117
- Tracks, vias
- 115, 114
- Pours
- 13
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 8 May 2024
- Updated
- 15 May 2024
Overview
PSU Plus is an open-source printed circuit board by CrazyGadgetMods, from the CrazyGadgetMods/PSU-Plus repository on GitHub. It is a 2-layer board of 18 × 49.5 mm with 55 parts on 29 nets, routed with 115 tracks and 114 vias.
Its parts include 20 capacitors, 10 resistors, 5 ICs and 5 inductors. It belongs with the power boards of this library.
README
README.mdPSU-Plus
The PSU-Plus is the spiritual successor to Noah's RVL-PSU, designed for ease of assembly and versatility across many micro-type builds.
Like it's predecessor, the PSU-Plus has 1V, 1.15V, 3.3V and 5V regulators. Where the PSU-Plus differs is the addition of a 1.8V regulator for builds that remove the LDO from the Wii (such as Wesk's GC Micro and the GC Nano).
I designed this board when the TLV62130RGTR regulators were out of stock as a drop-in replacement for the RVL-PSU. It has the exact same board outline dimensions, as well as the same screw hole layout / dimensions.
I have added an additional VIN pad for builds that use VIN elsewhere in the project (such as feeding 12V to the audio amplifier / sensor bar in the Noldendo Miicro). I have also added jumper pads to enable / disable the 1v8 and 5v regulars if your build does not require either of them.
VIN Min: 5V
VIN Max: 18V
Max current output (per regulator): 3A
If you are interested in buying one of these boards pre-assembled, I sell them on my Etsy Store.
Credits
- YveltalGriffin: Holding my hand while I did the layout of the board and answering my infinite questions
- Noah: Making the original RVL-PSU
- BitBuilt: Being the best modding community out there!
License
Solderpad Hardware License v2.1
Parts
55| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 22uF | Capacitor_SMD:C_0603_1608Metric | C3, C4, C7, C8, C11, C12, C15, C16, C19, C20 |
| 6 | GND | TestPoint:TestPoint_Pad_2.0x2.0mm | GND, GND, GND, GND, GND, GND |
| 5 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C5, C9, C13, C17 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R4, R6, R8, R10 |
| 5 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2, C6, C10, C14, C18 |
| 5 | 3.3uH | PSU Plus:1919 | L1, L2, L3, L4, L5 |
| 5 | AP62301Z6-7 | PSU Plus:SOT-563mod | U1, U2, U3, U4, U5 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2 |
| 2 | VIN | TestPoint:TestPoint_Pad_2.0x2.0mm | VIN, VIN |
| 1 | 12.4k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 1v | TestPoint:TestPoint_Pad_2.0x2.0mm | 1V |
| 1 | 1v15 | TestPoint:TestPoint_Pad_2.0x2.0mm | 1V15 |
| 1 | 1v8 | TestPoint:TestPoint_Pad_2.0x2.0mm | 1V8 |
| 1 | 2.55k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 31.6k | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 3v3 | TestPoint:TestPoint_Pad_2.0x2.0mm | 3V3 |
| 1 | 4.42k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 52.3k | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 5v | TestPoint:TestPoint_Pad_2.0x2.0mm | 5V |
Questions
How big is the PSU Plus PCB?
It measures 18 × 49.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PSU Plus use?
55 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PSU Plus KiCad files?
From the CrazyGadgetMods/PSU-Plus repository on GitHub, at the commit this page was made from: the board is KiCAD/PSU-Plus.kicad_pcb and its schematic KiCAD/PSU-Plus.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PSU Plus design in my own project?
Its repository states no licence, so its author keeps all rights: ask CrazyGadgetMods before reusing the design.
Similar boards
- 2 layers370 × 11 mm
Daylight Disco XXL
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
55 parts1.1kGPL-3.0 - 2 layers370 × 10 mm
E3NGLEDstick
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
55 parts915 - 2 layers139.3 × 94.8 mm
Flake
lever-tech/flake
An open-source, wireless, split ergonomic keyboard designed to be productive, healthy, and enjoyable. [formerly Anywhy Flake]
55 parts531CERN-OHL-W-2.0 - 2 layers237.5 × 102.9 mm
Memory
jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.
55 parts301Unlicense - 2 layers60.6 × 24.1 mm
Blep hackerboard
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
55 parts253GPL-3.0 - 2 layers100 × 96.5 mm
Keyboard ch552-36-lhs
rgoulter/keyboard-labs
Repo with my PCB designs and keyboard firmware
55 parts236 - 2 layers190.5 × 85.7 mm
Dissatisfaction30
dcpedit/dissatisfaction30
To get the PCB manufactured, upload dissat-pcb.zip to JLCPCB, select your desired PCB color while keeping all the other default options, and place your order (minimum 5).
55 parts147CC-BY-4.0