Skip to the content
2 layers100 × 100 mmHeight, the printed circuit board in 3D

One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
89
Pads
298
Tracks, vias
873, 75
Pours
151
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
14 Mar 2026
Updated
3 Nov 2026

Overview

Height is an open-source printed circuit board by crankery, from the crankery/crank68 repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 100 mm with 19 parts on 89 nets, routed with 873 tracks and 75 vias.

It is built around the 74HCT273D. Its parts include 8 capacitors, 8 ICs and 1 connector. It belongs with the FPGA and CPLD boards of this library.

Main components

1

README

README.md

C68

One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

It's going to be pretty useless but it's fun to play around with all of this.

Hardware

So, this isn't intended to be historically accurate or anything. It's a 1970s CPU but I'll use modern components where it makes things simpler. So, for whatever reason I thought it'd be nice to use things like the MC6850, MC6821 and other components that would have been available when the M6800 was being used in the industry. But really, I'm just trying to avoid using microcontrollers that would render the actual CPU hopelessly redundant.

One place I used a microcontroller is on the terminal board. It's just being used to produce DVI video and render text. Oh, it also does the keyboard matrix scan. It has its one job and that's to replace a glass terminal. So, since it's busy doing dumb terminal stuff it doesn't really matter that it's anacronistic... right?

The computer is split up across a bunch of 100x100mm boards. This is an attempt to reduce the cost of production as that's the maxiumum size the Chinese fabs will produce at bargain pricing. The one exception (thus far) is the actual keyboard; its dimensions are dictated by the keyboard layout.

I'm currently using some SPLDs as there were analogs of these back in the day. I am using them for decode logic for the most part but I'm trying to replace them with simple 74 series logic slowly.

Boards

As previously mentioned, the computer is built upon a set of cards. These cards are generally single function so there's a lot of them.

Backplane

The backplane is a simple board with a bunch of slots on it. Each board will plug into this board. The boards are setup to be chained together. The slots are 13.5mm apart giving about 12mm of component height for each board. If a board grows taller than this or has multiple layers, it will block the next slot. This is tall enough to allow for most common components though.

The left side of each board is allowed to host connectors. This allows for connecting I/O devices to individual boards such as parallel ports, serial ports, video output or sound output.

Status: C68BP.01 sent to production

Processor

This board hosts the Motorola M6800 CPU and the MC6875 clock generator along with an oscillator running at 4MHz. This will result in a 1MHz system clock.

Status: C68CPU.01 sent to production

Memory

Lower 48KB of RAM (in FRAM), 8KB ROM (EEPROM)

Status: C68MEM.01 sent to production

Banked Memory

1 MB of batery backed SRAM presented in two four KB windows in the main address space.

Status: Finalized design

Math

AMD AM9511 FPU

Status: design in progress

Sound

This is a sound board. I'm still trying to decide which chip(s) to use. The YM2149 OPL2, Philips SAA1099, GI AY-3-8910 SGM

Status: spitballing

IO

2xACIA MC6850, 2xPIA MC6821

Status: design completed

Time

A DS12885 RTC and a MC6850 PTC.

Status: design completed

Front Panel

blinkenlights and switches and buttons.

Status: in progress

Terminal

Using a Raspberry PI Pico with PicoDVI to generate the terminal's video and to perform keyboard scans. Uses an on-board MC6850 for communication to the host system.

Status: sent to production

Software

The software for this project includes some old stuff and some new stuff. The old stuff is being "translated" into a VASM 6800 standard syntax while the new stuff is being written that way.

Emulator

emu is a very basic M6800 emulator and is being used to verify software development. It isn't complete yet and will halt when it encounters an unimplemented instruction.

It is designed to match the actual computer's IO and memory access and will do the minimum to make things appear as they will in reality. So, the ACIA status and control registers set the flags appropriately while the actual rate of transfer isn't worried about.

New Stuff

C68 BIOS

Old Stuff

MIKBUG2
Micro Basic

Tools

Everything is being done using open source tools. This includes, but is not limited to:

  • kicad
  • vasm
  • vlink
  • galasm
  • minipro
  • GCC

Parts

19
QtyValueFootprintReferences
8100nF0-Footprints:C_Disc_D5.0mm_W2.5mm_P5.00mmC1, C2, C3, C4, C5, C6, C7, C8
428C640-Footprints:DIP-28_W15.24mmU1, U2, U3, U4
1622560-Footprints:DIP-28_W15.24mm_W7.62mmU5
174HCT2730-Footprints:DIP-20_W7.62mmU7
174LS6880-Footprints:DIP-20_W7.62mmU8
1Buss0-Footprints:CardJ1
1Crankery0-Footprints:crankery_smallG2
1GAL22V100-Footprints:DIP-24_W7.62mmU6
1LOGO0-Footprints:CrankG1

More from crankery/crank68

12
  • 2 layers290.3 × 119.1 mmKeyboard, the printed circuit board in 3D

    Keyboard

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    162 partsMIT
  • 2 layers100 × 100 mmFront, the printed circuit board in 3D

    Front

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    60 partsMIT
  • 2 layers100 × 100 mmSound, the printed circuit board in 3D

    Sound

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    58 partsMIT
  • 2 layers100 × 100 mmBankedMemory, the printed circuit board in 3D

    BankedMemory

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    44 partsMIT
  • 2 layers100 × 100 mmTerminal, the printed circuit board in 3D

    Terminal

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    38 partsMIT
  • 2 layers100 × 100 mmBusDepot, the printed circuit board in 3D

    BusDepot

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    35 partsMIT
  • 2 layers100 × 100 mmProcessor, the printed circuit board in 3D

    Processor

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    32 partsMIT
  • 2 layers100 × 100 mmCrank68, the printed circuit board in 3D

    Crank68

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    30 partsMIT
  • 2 layers100 × 100 mmCrank68, the printed circuit board in 3D

    Crank68

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    29 partsMIT
  • 2 layers100 × 100 mmRTC, the printed circuit board in 3D

    RTC

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    28 partsMIT
  • 2 layers100 × 100 mmMath, the printed circuit board in 3D

    Math

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    26 partsMIT
  • 2 layers100 × 100 mmTime, the printed circuit board in 3D

    Time

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    25 partsMIT

Similar boards

  • 2 layers333.4 × 149.9 mmOmega Mainboard, the printed circuit board in 3D

    Omega Mainboard

    skiselev/omega

    Omega Home Computer

    248 parts459GPL-3.0
  • 2 layers297.2 × 180.3 mm8bit computer, the printed circuit board in 3D

    8bit computer

    vascofazza/8bit-cpu

    Schematics & code for my 74LS-based 8-bit MK1 CPU

    377 parts317MIT
  • 2 layers135 × 100 mmZ80vga, the printed circuit board in 3D

    Z80vga

    anjennings/Tom80

    2B is the "definitive" version so all code going forward is designed for that version of the board. Minor hardware differences mean that code for 2.0 may not work on 2.0B without tweaks (mostly related to ram banking)

    53 parts94MIT
  • 2 layers58.2 × 84.1 mmNeoRAMremix, the printed circuit board in 3D

    NeoRAMremix

    hackup/NeoRAMremix

    A remix of the NeoRAM catridge for the Commodore 64.

    29 parts41
  • 2 layers333.4 × 149.9 mmOmega Mainboard, the printed circuit board in 3D

    Omega Mainboard

    merlinkv/Omega_MSX2

    Update of the Omega Home Computer Project

    265 parts40GPL-3.0
  • 4 layers401.3 × 203.2 mmCpu010, the printed circuit board in 3D

    Cpu010

    thorpej/pg68k

    The 68k Playground, a 680x0-based home-brew computer with multiple CPU options

    272 parts15
  • 2 layers188 × 102.9 mmRC200-Dev Backplane, the printed circuit board in 3D

    RC200-Dev Backplane

    MarkD833/RCBUS-68xxx

    My Motorola 68000 & 68302 processors (+ SIO, PIO & MFP boards) for the RCBus ecosystem.

    102 parts8GPL-3.0
  • 2 layers99.7 × 80 mm6502fast3io, the printed circuit board in 3D

    6502fast3io

    gfoot/fastpdip6502

    Fast PDIP-only 6502-based homebrew computer - code and hardware design sources

    56 parts7Unlicense

Questions

How big is the Height PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Height use?

19 parts, built around the 74HCT273D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Height KiCad files?

From the crankery/crank68 repository on GitHub, at the commit this page was made from: the board is Height/Height.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Height design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).