
ESP32-S3-Breakout
eggsampler/ESP32-S3-Breakout
A minimal breakout board for the ESP32-S3-WROOM module

Cringesticc is an open-source printed circuit board by cr1tbit, from the cr1tbit/cringesticc repository on GitHub. It is a 2-layer board of 16 × 98.5 mm with 50 parts on 101 nets, routed with 4 tracks and 0 vias.
It is built around the CC1101RGP, USBLC6-2SC6 and XC6210B332MR. Its parts include 17 capacitors, 12 resistors, 6 switches, 5 ICs and 5 connectors. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100n | Capacitor_SMD:C_0402_1005Metric | C4, C5, C6, C7, C10, C11, C13, C15, C17 |
| 8 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R4, R5, R9, R10, R11, R12, R13 |
| 5 | BTN | Button_Switch_SMD:Panasonic_EVQPUJ_EVQPUA | SW2, SW3, SW4, SW5, SW6 |
| 4 | 20p | Capacitor_SMD:C_0402_1005Metric | C1, C2, C14, C16 |
| 3 | 10u | Capacitor_SMD:C_0402_1005Metric | C8, C9, C12 |
| 3 | 2k | Resistor_SMD:R_0402_1005Metric | R6, R7, R8 |
| 2 | 6MHZ 2520 | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1, Y2 |
| 2 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 1n | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | BAT_GND | TestPoint:TestPoint_Pad_4.0x4.0mm | J4 |
| 1 | BAT_V | TestPoint:TestPoint_Pad_4.0x4.0mm | J3 |
| 1 | BUT_SMD | Button_Switch_SMD:Panasonic_EVQPUJ_EVQPUA | SW1 |
| 1 | CC1101 | Package_DFN_QFN:Texas_S-PVQFN-N20_EP2.4x2.4mm_ThermalVias | U5 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | Conn_Coaxial | Connector_Coaxial:SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMount | J5 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | STM32F103RFTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | STM_BOOT0 | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 1 | XC6210B332MR | Package_TO_SOT_SMD:SOT-23-5 | U4 |

eggsampler/ESP32-S3-Breakout
A minimal breakout board for the ESP32-S3-WROOM module



neon-beat/neon-beat-buzzer-pcb
Electronic design for the Neon Beat buzzer

FarahCelebi/Smart-Prosthetic-Arm-Projects
PCB board designs for smart prosthetic arms

YingK8/ESP32-BLE-Macro-Pad
A compact, programmable macropad with Bluetooth connectivity, featuring 6 mechanical keys and a rotary encoder for media control.

SzymonLy/Quadcopter_2.1
Projekt PCB do autonomicznego quadcoptera, wersja finalna i sprawna

jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
It measures 16 × 98.5 mm and has 2 copper layers, 0.69 mm thick.
50 parts, built around the CC1101RGP, USBLC6-2SC6 and XC6210B332MR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the cr1tbit/cringesticc repository on GitHub, at the commit this page was made from: the board is cringestiCC.kicad_pcb and its schematic cringestiCC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask cr1tbit before reusing the design.