

WeatherDashboard
- Size
- 103 × 80.1 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 77
- Pads
- 218
- Tracks, vias
- 358, 71
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 3 Mar 2022
- Updated
- 16 Oct 2026
Overview
WeatherDashboard is an open-source printed circuit board by cpeniche, from the cpeniche/hardware repository on GitHub. It is a 4-layer board of 103 × 80.1 mm with 53 parts on 77 nets, routed with 358 tracks and 71 vias.
It is built around the 74LVC2G17GV,125-JSM, MPM3805GQB-33-Z and MBR0530, with the AO3401A, BSS138 and BSS84 among its other parts. Its parts include 18 resistors, 16 capacitors, 5 transistors, 5 connectors and 3 diodes.
Main components
874LVC2G17GV,125-JSM
SOT-23-6-40℃~+125℃ 1.65V~5.5V 2 24mA 24mA 4uA 74LVC Level shifting Schmitt trigger Unidirectional SOT-23-6 Buffers, Drivers, Receivers, Transceivers ROHSJSMSEMIBuffers, Drivers, Receivers, TransceiversMPM3805GQB-33-Z
QFN-12(2.5x3)-40℃~+125℃ 0.9mm 1 17uA 2.5V~6V 2.5mm 3.3V 3.5MHz 3mm 600mA Short Circuit Protection、Over-temperature protection、Over Current Protection、Under Voltage Protection、Automatic fault recovery、Light load efficient mode、Power-on timing control Step-down type QFN-12(2.5x3) DC-DC Power Modules ROHSMonolithic Power SystemsDC-DC Power ModulesMBR0530
SOD-1231 Independent 30V 5.5A 500mA 550mV@500mA 80uA@30V SOD-123 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky DiodesAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsBSS84
SOT-23-55℃~+150℃ 1 P-Channel 130mA 2.8pF 24.6pF 2V 3.2Ω@5V 300mW 4.7pF 50V 590pC@10V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsSDE0805A-680K
SMD,7.8x7mm1.1A 1.45A 280mΩ 68uH Wire-wound inductor ±10% SMD,7.8x7mm Power Inductors ROHSBournsPower InductorsSS8050
SOT-323-55℃~+150℃ 1 NPN 1.5A 100MHz 100nA 200 25V 300mW 500mV 5V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C5, C6, C7, C8, C9, C10, C11, C12, C13 |
| 7 | 10K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R5, R8, R15, R16, R17, R18 |
| 3 | 100K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R11, R14 |
| 3 | 436331045822 | User_Footprint:4363X10458XX | S1, S2, S3 |
| 3 | MBR0530 | Diode_SMD:D_SOD-123 | D1, D2, D3 |
| 2 | 0 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R9, R10 |
| 2 | 0.1u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C15, C16 |
| 2 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-3216-12_Kemet-S_HandSolder | C1, C2 |
| 2 | 47K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4, R7 |
| 1 | 0.47 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R13 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3 |
| 1 | 1K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R6 |
| 1 | 2041119-1 (Mini Pcie Express Half) | User_Footprint:CONN_2041119-1_TEC | J6 |
| 1 | 330K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R12 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4 |
| 1 | 524372471 | User_Footprint:CON_524372471_MOL | J3 |
| 1 | 74LVC2G17GV_125 | User_Footprint:SC-74_TSOP6_NEX | U2 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q5 |
| 1 | BSS84 | Package_TO_SOT_SMD:SOT-23 | Q4 |
| 1 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Conn_01x03_Pin | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J5 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | MPM3805GQB-33-Z | User_Footprint:QFN2p5x3p0x0p9_MNP | U1 |
| 1 | SDE0805A-680K | User_Footprint:IND_SDE0805A-680K | L1 |
| 1 | SS8050 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q3 |
More from cpeniche/hardware
12- 4 layers22 × 22 mm

- 4 layers100.6 × 67.1 mm

- 4 layers54 × 52.7 mm

- 4 layers72.8 × 53.3 mm

- 4 layers36.9 × 34 mm

- 2 layers68 × 56 mm

- 4 layers33.8 × 34.4 mm

- 4 layers30 × 26.8 mm

- 4 layers30 × 26.8 mm

- 2 layers36 × 38.9 mm

- 2 layers28.7 × 29.8 mm

- 2 layers45.3 × 38.8 mm

Similar boards
- 2 layers100 × 100 mm

- 2 layers56.8 × 90 mm

- 2 layers50 × 50 mm

- 2 layers100 × 100 mm

- 4 layers100 × 80 mm

Low Power Cellular ePaper Device ESP32-S3 SIM7600
xmyoot/cellular-epaper-esp32s3-sim7600
Low-Power Cellular ePaper Device with ESP32-S3 and SIM7600 LTE Cat-1
108 parts - 2 layers31.7 × 29.2 mm

Epaper driver
locked/picoclock
This repo is an attempt at building a Pico based alarm clock. It was created for my kids and features:
34 parts - 2 layers98.8 × 55.1 mm

H bridge controller
jayanta525/dual-h-bridge
Dual H-Bridge Controller with IRF3205 and IR2104 MOSFET Driver, and with ATMega328P-AU PWM Controller
104 parts5MIT - 2 layers54 × 47.5 mm

PCB updi unbricker
k-takata/PCB_updi_unbricker
UPDI High Voltage programmer for AVR Dx/Ex and ATtiny series
63 parts
Questions
How big is the WeatherDashboard PCB?
It measures 103 × 80.1 mm and has 4 copper layers, 1.6 mm thick.
What parts does the WeatherDashboard use?
53 parts, built around the 74LVC2G17GV,125-JSM, MPM3805GQB-33-Z, MBR0530 and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the WeatherDashboard KiCad files?
From the cpeniche/hardware repository on GitHub, at the commit this page was made from: the board is Nordic/nrf52840/WeatherDashboard/WeatherDashboard.kicad_pcb and its schematic AVR/cnc_arduino_hat/A4983 Motor Driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the WeatherDashboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask cpeniche before reusing the design.