
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

ESP32-based navigation system on a custom KiCad PCB built for a minimized form factor.
Esp32-gps proj is an open-source printed circuit board by CowMan999, from the CowMan999/esp-offline-map repository on GitHub. It is a 2-layer board of 59.7 × 54 mm with 7 parts on 32 nets, routed with 85 tracks and 14 vias.
It belongs with the radio and wireless boards and the ESP32 boards of this library.
Offline turn-by-turn map display built on a custom KiCad PCB. An ESP32 drives a TFT LCD over SPI, reads position from a Neo-M8 GPS module over UART, and renders map tiles streamed from an SD card - all inside SRAM tight enough to require custom memory handling.
This project pairs original PCB hardware with custom C++ firmware:
ledcAttach/ledcWrite)| Lock Screen | Main Menu | Map View |
|---|---|---|
![]() | ![]() | ![]() |
| Component | Interface | Notes |
|---|---|---|
| ESP32 | - | Main MCU |
| TFT LCD (320x240) | SPI | Display + resistive touch |
| Neo-M8 GPS | UART | 9600 baud, pins 16/17 |
| microSD card | SPI (HSPI) | Stores /map/<zoom>/<x>/<y>.png tiles |
| Schematic | PCB Layout |
|---|---|
![]() | ![]() |
Schematic and board files are in /hardware (KiCad).
lv_conf.h requires: LV_COLOR_DEPTH 16, LV_USE_CANVAS 1, LV_USE_SLIDER 1, and the Montserrat 10/14/20 fonts enabled.
/map/<zoom>/<x>/<y>.png with pre-rendered OpenStreetMap tiles.Actively developed. Planned work includes route recording under the Runs screen and expanded tile caching.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x15_Socket | Connector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_Vertical | ESP-BOT1, ESP-TOP1 |
| 1 | Conn_01x04_Socket | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | NEO_M1 |
| 1 | Conn_01x08_Socket | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | TF_READER1 |
| 1 | Conn_01x12_Socket | Connector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_Vertical | TFT_LCD1 |
The 5 most common of 7 parts.

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.



AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power


jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

It measures 59.7 × 54 mm and has 2 copper layers, 1.6 mm thick.
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CowMan999/esp-offline-map repository on GitHub, at the commit this page was made from: the board is pcb/esp32-gps-proj.kicad_pcb and its schematic pcb/esp32-gps-proj.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask CowMan999 before reusing the design.