2 layers36 × 14 mm
TFASPDIMU01
ThunderFly-aerospace/TFASPDIMU01
SPI or I²C differential pressure sensor and IMU unit.
26 parts1GPL-3.0
2 layers39.9 × 16.5 mm
Zforce air adapter
corytodd/neonode-adapterAlternative USB/I2C adapter board for zForce AIR NeoNode
- Size
- 39.9 × 16.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 15
- Pads
- 68
- Tracks, vias
- 97, 12
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 28 Jul 2026
- Updated
- 28 Jul 2026
Overview
Zforce air adapter is an open-source printed circuit board by corytodd, from the corytodd/neonode-adapter repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 39.9 × 16.5 mm with 10 parts on 15 nets, routed with 97 tracks and 12 vias.
It is built around the SM07B-GHS-TB. Its parts include 5 resistors, 3 connectors and 1 switch. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdCopyright (c) 2026 Cory Todd This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. http://creativecommons.org/licenses/by-sa/4.0/
Adapter Board for Proximity Sensor Module
zForce® and AIR® are registered trademarks of Neonode Inc. This project is an independent, unofficial hardware adapter and is not affiliated with, endorsed by, or sponsored by Neonode Inc. All product names, logos, and brands are property of their respective owners.
This is an alternative form-factor USB/I2C adapter board. The original board uses a flat-flex cable and FPC connectors. I've ripped up more traces than I care to admit... so I've made my own.
The idea is to use a single board design with the FPC on the backside that acts as the mount. The USB micro has been replaced by a USB C connector. The surface test points have been replaced by a JST header.
This is a work-in-progress. Parts are arriving in the next couple weeks.
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 4.7k | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R3, R4 |
| 2 | 5.1k | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R1, R2 |
| 1 | 10k | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R5 |
| 1 | Debug | Connector_JST:JST_GH_SM08B-GHS-TB_1x08-1MP_P1.25mm_Horizontal | J3 |
| 1 | FerriteBead | Resistor_SMD:R_0201_0603Metric | FB1 |
| 1 | NeoNode | Library:Molex_2005290080_1x08-1MP_P1.00mm_Horizontal_BottomContact | J2 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mm | SW1 |
| 1 | USB | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
Questions
How big is the Zforce air adapter PCB?
It measures 39.9 × 16.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Zforce air adapter use?
10 parts, built around the SM07B-GHS-TB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Zforce air adapter KiCad files?
From the corytodd/neonode-adapter repository on GitHub, at the commit this page was made from: the board is zforce_air_adapter.kicad_pcb and its schematic zforce_air_adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Zforce air adapter design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers70.6 × 50.3 mm
TFUNIPAYLOAD01
ThunderFly-aerospace/TFUNIPAYLOAD01
Universal interface for TF-ATMON sensor payload.
81 parts1GPL-3.0 - 4 layers60 × 55.1 mm
BalancerREF
natehorst240-sketch/HoboBalancer
Hobby helicopter rotor-balancing instrumentation. KiCad 10 projects plus ESP32-S3 firmware.
88 parts - 4 layers17.4 × 43.2 mm
Amulet encoder
EPFLXplore/XRE_LeggedRobot_HW
PCB designs for Xplore Research's robot dog project
47 parts348Apache-2.0 - 2 layers48 × 34 mm
- 2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0 - 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k