
Passive rpi hub75-adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

VFD CLOCK is an open-source printed circuit board by Corylus-Lv, from the Corylus-Lv/VFD_CLOCK repository on GitHub. It is a 2-layer board with 2 parts on 76 nets.
It belongs with the lEDs and displays boards of this library.
現在進行中のプロジェクト(ぼちぼち進めてます)
デジットさんで購入したVFD(LD8164)と時計IC(LM8363DH)を使ってデジタル時計を試作しています。 ブレッドボードで基本的な動作確認は終わりました。
KiCAD6でロジック的な回路図は書き終わりましたので、とりあえず公開します。 今後は、回路図を完全にする事と、アートワークを書いて基板化しようかと思っています。
ただ、部品の入手が難しいだろうし、どれくらい需要があるかなぁ・・・・ (LM8363DHはまだ在庫あるみたいだし、VFDはLD8035Eを並べてもいいかも)
CC BY-NC-SA 3.0
免責事項:
このプロジェクトに掲載した情報については「現状のまま」で、明示であるか暗黙であるかを問わず、何らの保証もありません。
この情報の利用またはその他の扱いに関連した、請求、損害、その他の義務については一切の責任を負うものではありません。
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | LD8164 | hk-footprints:LD8164 | U1 |
| 1 | LM8363 | Package_DIP:DIP-42_W15.24mm | U2 |
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Corylus-Lv/VFD_CLOCK repository on GitHub, at the commit this page was made from: the board is KiCad/VFD_CLOCK.kicad_pcb and its schematic KiCad/VFD_CLOCK.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Corylus-Lv before reusing the design.

hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
