

ResistorPullup
- Size
- 18.5 × 7.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 2
- Pads
- 6
- Tracks, vias
- 8, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 2 May 2023
- Updated
- 6 Sep 2024
Overview
ResistorPullup is an open-source printed circuit board by corygrant, from the corygrant/ResistorHelpers repository on GitHub, published under the MIT licence. It is a 2-layer board of 18.5 × 7.1 mm with 5 parts on 2 nets, routed with 8 tracks and 0 vias.
Its parts include 4 connectors and 1 resistor.
README
README.mdResistorHelpers
Small resistor PCBs for wiring, with notches for cable ties.
-
Resistor Divider
-
Resistor Pullup
-
Terminating Resistor
-
Inline Resistor
Images




Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x01 | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm | J1, J2, J3, J4 |
| 1 | R_US | Resistor_SMD:R_0805_2012Metric | R1 |
More from corygrant/ResistorHelpers
2- 2 layers18.5 × 7.1 mm

- 2 layers18.5 × 5.5 mm

Similar boards
- 2 layers98 × 27 mm

- 2 layers21 × 33 mm

24g2usb pico2w
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
5 parts1.7kApache-2.0 - 2 layers53.2 × 59.6 mm

A10 OLinuXino Lime Rev B SHIELD TEMPLATE
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
5 parts1.5k - 2 layers30 × 11 mm

Main control board servo tester
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
5 parts1.1k - 2 layers78.8 × 35.3 mm

KiCadTest
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
5 parts915 - 2 layers50 × 23 mm

- 2 layers43.2 × 28.5 mm

- 2 layers20.3 × 15.2 mm

L0 light sensor
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
5 parts546MIT
Questions
How big is the ResistorPullup PCB?
It measures 18.5 × 7.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ResistorPullup use?
5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ResistorPullup KiCad files?
From the corygrant/ResistorHelpers repository on GitHub, at the commit this page was made from: the board is ResistorPullup/ResistorPullup.kicad_pcb and its schematic InlineResistor/InlineResistor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ResistorPullup design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).