Skip to the content
2 layers38 × 22 mm1u lpg, the printed circuit board in 3D

Open-source eurorack synthesizer modules and related stuff.

Size
38 × 22 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
8
Pads
32
Tracks, vias
29, 0
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
12 Jan 2018
Updated
8 Nov 2021

Overview

1u lpg is an open-source printed circuit board by coriolisinstruments, from the coriolisinstruments/EurorackModules repository on GitHub. It is a 2-layer board of 38 × 22 mm with 11 parts on 8 nets, routed with 29 tracks and 0 vias.

Its parts include 2 capacitors, 1 IC and 1 diode. It belongs with the audio and music boards of this library.

README

README.md

EurorackModules

Open-source eurorack synthesizer modules. All our schematics and pcbs are developed with KiCad.

1U modules

These are simple (passive) utility modules, designed to fit the Intellijel 1U spec. They are often smaller (6 or 8HP) so you can use them to fill gaps in your system. Except for the Multibus... that one takes up an entire row.

ModuleDescription
OSHpark previewLPGA simple passive low-pass gate with -6dB slope in a small 1U package.
OSHpark previewMuteA signal mute (momentary and latching) in a convenient 1U package.
OSHpark previewMultDead simple passive multi. Its only feature being very small.
MultibusA eurorack module for the distribution of CV signals.

Regular (3U) Modules

Just your regular sized eurorack modules.

ModuleDescription
CoronaA multi purpose vacuum tube (or valve) drive module with feedback control.

Other stuff

ThingDescription
Kicad renderPSU CompanionA companion for Bel / Condor / Power One linear power supplies. Goes inbetween the PSU and your busboards.
Making VactrolsA little tutorial on making your own vactrols.

Parts

11
QtyValueFootprintReferences
3thonkiconnCoriolis-KiCad:MusicThingModular-WQP-PJ301M-12_JACKJ_CV_1, J_IN_1, J_OUT_1
20.1uFCapacitors_THT:C_Disc_D4.7mm_W2.5mm_P5.00mmC1, C2
1100KCoriolis-KiCad:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR_VAC_1
120KCoriolis-KiCad:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR_LED_1
1A10KMusicThingModular:MusicThingModular-9MM_SNAP-IN_POTRV1
1LEDLEDs:LED_D3.0mmD1
1VTL5Cx2Coriolis-KiCad:DIY_Optoisolator_VTL5Cx2U1

The 10 most common of 11 parts.

More from coriolisinstruments/EurorackModules

8
  • 2 layers526 × 20 mmMultibus mainboard, the printed circuit board in 3D

    Multibus mainboard

    coriolisinstruments/EurorackModules

    Open-source eurorack synthesizer modules and related stuff.

    140 parts33
  • 2 layers78 × 108 mmCorona mainBoard, the printed circuit board in 3D

    Corona mainBoard

    coriolisinstruments/EurorackModules

    Open-source eurorack synthesizer modules and related stuff.

    88 parts33
  • 2 layers526 × 20 mmMultibus frontboard, the printed circuit board in 3D

    Multibus frontboard

    coriolisinstruments/EurorackModules

    Open-source eurorack synthesizer modules and related stuff.

    79 parts33
  • 2 layers99 × 87 mmSnackBus PSU, the printed circuit board in 3D

    SnackBus PSU

    coriolisinstruments/EurorackModules

    Open-source eurorack synthesizer modules and related stuff.

    42 parts33
  • 2 layers38.5 × 81 mmPSUCompanion, the printed circuit board in 3D

    PSUCompanion

    coriolisinstruments/EurorackModules

    Open-source eurorack synthesizer modules and related stuff.

    23 parts33
  • 2 layers78 × 30.5 mmCorona tubeBoard, the printed circuit board in 3D

    Corona tubeBoard

    coriolisinstruments/EurorackModules

    Open-source eurorack synthesizer modules and related stuff.

    16 parts33
  • 2 layers28 × 22 mm1u mult, the printed circuit board in 3D

    1u mult

    coriolisinstruments/EurorackModules

    Open-source eurorack synthesizer modules and related stuff.

    5 parts33
  • 2 layers28 × 22 mm1u mute, the printed circuit board in 3D

    1u mute

    coriolisinstruments/EurorackModules

    Open-source eurorack synthesizer modules and related stuff.

    4 parts33

Similar boards

  • 2 layers60 × 30 mmController, the printed circuit board in 3D

    Controller

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    11 parts3kApache-2.0
  • 2 layers103 × 30.5 mmTS Front Endcap, the printed circuit board in 3D

    TS Front Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    11 parts1.3kMIT
  • 2 layers26 × 30 mmExpansion Card, the printed circuit board in 3D

    Expansion Card

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    11 parts1.1kCC-BY-4.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    11 parts1kGPL-3.0
  • 2 layers10 × 20 mm2 connector Sensor Board, the printed circuit board in 3D

    2 connector Sensor Board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    11 parts915
  • 2 layersFet module, the printed circuit board in 3D

    Fet module

    ByteWelder/Decktility

    A handheld PC

    11 parts855CC-BY-SA-4.0
  • 2 layers47 × 33 mmSevensegment led display module, the printed circuit board in 3D

    Sevensegment led display module

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    11 parts803MIT
  • 2 layers42.5 × 36.8 mmDevboard, the printed circuit board in 3D

    Devboard

    basilfx/TRADFRI-Hacking

    Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.

    11 parts743CC-BY-4.0

Questions

How big is the 1u lpg PCB?

It measures 38 × 22 mm and has 2 copper layers, 1.6 mm thick.

What parts does the 1u lpg use?

11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 1u lpg KiCad files?

From the coriolisinstruments/EurorackModules repository on GitHub, at the commit this page was made from: the board is 1Utilities/1U_LPG/hardware/1u_lpg/1u_lpg.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the 1u lpg design in my own project?

Its repository states no licence, so its author keeps all rights: ask coriolisinstruments before reusing the design.