Skip to the content
4 layers100 × 60 mmUsb hub, the printed circuit board in 3D

4-port USB 2.0 Full-Speed Hub using Microchip USB2514BI

Size
100 × 60 mm
Copper layers
4
Thickness
1.6 mm
Parts
82
Nets
96
Pads
350
Tracks, vias
593, 349
Pours
5
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
14 Sep 2025
Updated
26 Feb 2026

Overview

Usb hub is an open-source printed circuit board by coolachlanke, from the coolachlanke/usb-c-hub repository on GitHub. It is a 4-layer board of 100 × 60 mm with 82 parts on 96 nets, routed with 593 tracks and 349 vias.

It is built around the STM32F103C8T6, USBLC6-2SC6 and MIC2026-1YM, with the AMS1117-3.3 and WS2812B among its other parts. Its parts include 25 capacitors, 18 resistors, 10 ICs, 7 connectors and 6 diodes. It belongs with the interfaces and adapters boards and the STM32 boards of this library.

Main components

5

README

README.md

Read of the me

Parts

82
QtyValueFootprintReferences
15100nCapacitor_SMD:C_0402_1005MetricC3, C4, C5, C6, C9, C11, C14, C16, C17, C18, C19, C20, C21, C22, C23
7100kResistor_SMD:R_0402_1005MetricR4, R6, R7, R11, R14, R15, R16
7TestPointTestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mmTP1, TP2, TP3, TP4, TP5, TP6, TP7
5USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U3, U4, U5, U6, U8
456kResistor_SMD:R_0402_1005MetricR3, R8, R12, R13
4MountingHoleMountingHole:MountingHole_2.2mm_M2H1, H2, H3, H4
4WS2812BLED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mmD3, D4, D5, D6
3USB_C_Receptacle_USB2.0_16Plibs:USB-C-SMD_TYPE-C-6PIN-2MD-073J1, J2, J3
210pCapacitor_SMD:C_0402_1005MetricC24, C25
218pCapacitor_SMD:C_0402_1005MetricC2, C10
21uCapacitor_SMD:C_0603_1608MetricC7, C8
222uCapacitor_SMD:C_0805_2012MetricC12, C13
25.1kResistor_SMD:R_0402_1005MetricR1, R2
2Conn_01x04_Pinlibs:HDR-TH_4P-P2.54-V-MJ7, J8
2MIC2026-1YMPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU7, U9
2USB_Alibs:USB-A-TH_USB-231-ARYJ4, J5
1100nCapacitor_SMD:C_0603_1608MetricC1
110kCapacitor_SMD:C_0402_1005MetricR17
110uCapacitor_SMD:C_0603_1608MetricC15
112kResistor_SMD:R_0402_1005MetricR10
116MHzlibs:OSC-SMD_4P-L3.2-W2.5-BLY2
11MResistor_SMD:R_0603_1608MetricR9
11kResistor_SMD:R_0603_1608MetricR18
124MHzlibs:CRYSTAL-SMD_4P-L3.2-W2.5-BL_SIT8008BIY1
1750RResistor_SMD:R_0603_1608MetricR5
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1GREENLED_SMD:LED_0805_2012MetricD1
1LOGOLOGOG***
1STM32F103C8T6Package_QFP:LQFP-48_7x7mm_P0.5mmU10
1SW_Pushlibs:SW-SMD_L3.9-W3.0-P4.45SW2
1SW_SPDTlibs:SW-SMD_K3-1280S-K1SW1
1USB2514B_BiPackage_DFN_QFN:QFN-36-1EP_6x6mm_P0.5mm_EP3.7x3.7mmU1
1YELLOWLED_SMD:LED_0805_2012MetricD2

Similar boards

  • 6 layers170 × 170 mmHILTOP Motherboard, the printed circuit board in 3D

    HILTOP Motherboard

    devtank-ltd/kicad_hiltop_motherboard

    HILTOP Motherboard

    801 parts1
  • 4 layers159.1 × 99.9 mmLoTI Board, the printed circuit board in 3D

    LoTI Board

    devtank-ltd/kicad_hiltop_loti_board

    KiCAD files for Loti card for HILTOP

    452 parts
  • 2 layers47.6 × 30.6 mmProgramator spi, the printed circuit board in 3D

    Programator spi

    internax/ukol_divelit

    Původní záměr byl použít ZIF socket, ten se však pro pDIP8 pouzdro prakticky nevyrábí. Zvolil jsem proto přesnou patici z doporučených komponent. Klíčovými kritérii byl nízký odpor kontaktů a zlaté pokovení pinů.

    42 partsMIT
  • 4 layers145 × 73 mmDashboard, the printed circuit board in 3D

    Dashboard

    broncoracing/dashboard

    BR23 Dashboard PCB/Firmware

    284 parts
  • 2 layers38.1 × 30.2 mmStm32spi new, the printed circuit board in 3D

    Stm32spi new

    SurajSonawane2415/PCB-Design-STM32-Dev-Board

    Custom STM32 Development (PCB) Board with an on-board SPI sensor (TC72).

    34 parts2
  • 2 layers43 × 33 mmSTM32, the printed circuit board in 3D

    STM32

    Adityasc9/STM32-Custom-PCB

    Hardware design files for a custom STM32 development board created in KiCad.

    39 parts
  • 2 layers79 × 66.8 mmDeneme, the printed circuit board in 3D

    Deneme

    bugraalpaydin/aks-pcb

    70 parts

Questions

How big is the Usb hub PCB?

It measures 100 × 60 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Usb hub use?

82 parts, built around the STM32F103C8T6, USBLC6-2SC6, MIC2026-1YM and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Usb hub KiCad files?

From the coolachlanke/usb-c-hub repository on GitHub, at the commit this page was made from: the board is usb_hub.kicad_pcb and its schematic usb_hub.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Usb hub design in my own project?

Its repository states no licence, so its author keeps all rights: ask coolachlanke before reusing the design.