2 layers304.8 × 170.8 mm
2 layers160 × 80 mm
EBF lamp driver circuit
cookobit/ebf_lamp11Electrical Blast Furnace (EBF) from GT modpacks 3D-printed lamp
- Size
- 160 × 80 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 22
- Pads
- 70
- Tracks, vias
- 91, 0
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 28 May 2026
- Updated
- 28 May 2026
Overview
EBF lamp driver circuit is an open-source printed circuit board by cookobit, from the cookobit/ebf_lamp repository on GitHub. It is a 2-layer board of 160 × 80 mm with 28 parts on 22 nets, routed with 91 tracks and 0 vias.
It is built around the IRLZ44N. Its parts include 7 connectors, 6 resistors, 5 capacitors, 2 diodes and 2 transistors. It belongs with the lEDs and displays boards of this library.
Main components
1README
README.mdEBF Lamp Project
You came after the Electrical Blast Furnace (EBF) from GregTech modpacks, especially GTNH. This repository contains all production files to date, plus special 3D-print files you can print at home and assemble yourself.
HOW TO PRINT THE EBF
- Download the whole repository.
- In the '3D_prints' folder, find files for 3D printing.
- The STLs come in two options: the lamp version, or for the regular version (empty inside), which is simpler.
- The lamp version requires a custom PCB, a step-down voltage module, and a power inlet. Because of these custom components, a full reproduction of the lamp from this repo is not possible in its current state.
IMPORTANT: Current dimensions are 192x192x256 mm for the lamp, change the scale for regular version, since the lamp has mounting holes for M3 screws and other components.
What's in this repository?
In short, the STLs I made so far, as well as some of the design files and software for ESP32 XIAO module. They are separated in two dedicated folders: firmware and hardware. The firmware was used in the Arduino IDE for flashing the program there, and the hardware was designed in the KiCad, dedicated open-source PCB design software.
Plans for the future:
The repo won't have a complete support and maintained actively, because of the real life stuff.
- New PCB for electronics integration. It should integrate the power inlet and complete sensor and hardware integration.
- An optional buzzer for the EBF to make the "working" sounds.
- A humidifier on top, active while the EBF is "running".
License
Hardware files are licensed under CERN-OHL-P; software is licensed under the MIT License. See the respective directories for full license text.
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100n | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C2, C4, C5 |
| 2 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 2 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R6 |
| 2 | Conn_01x08_Pin | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J5, J6 |
| 2 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | Q1, Q2 |
| 2 | LED | LED_THT:LED_D5.0mm | D1, D2 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_RND:TerminalBlock_RND_205-00045_1x02_P5.00mm_Horizontal | J1, J2 |
| 1 | 100-470u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 10u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C3 |
| 1 | Buck-XIAO Screw | TerminalBlock_RND:TerminalBlock_RND_205-00045_1x02_P5.00mm_Horizontal | J4 |
| 1 | R_Potentiometer | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | RV1 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_RND:TerminalBlock_RND_205-00046_1x03_P5.00mm_Horizontal | J7 |
| 1 | Screw_Terminal_01x03 LED Strip | TerminalBlock_RND:TerminalBlock_RND_205-00046_1x03_P5.00mm_Horizontal | J3 |
The 23 most common of 28 parts.
Similar boards
- 2 layers94 × 79 mm
- 2 layers
Morpheus kicad
pscrespo/Morpheus-STM32
A small 3D printer controller board for use with a "blue pill" STM32F1 generic board. Inspired on http://reprap.org/wiki/SinapTec
66 parts80GPL-3.0 - 2 layers100 × 100 mm
- 2 layers157.5 × 97.8 mm
Esp32PrinterController
MitchBradley/Esp32PrinterController
PCB design for 3D printer controller using ESP32 processor
101 parts16MIT - 2 layers99.1 × 99.1 mm
- 2 layers64.8 × 109.2 mm
Dmx ledstrip dimmer-32ch
robinolejnik/dmx-ledstrip-dimmer-32ch
Arduino Mini and TLC5940 based 32 channel 12V PWM dimmer with DMX512 and RDM support.
105 parts14MIT - 2 layers101.6 × 53.3 mm
BatteryAnalyzer MkII
Moragor/BatteryAnalyzer_MkII
Updated Version of the battery analyzer, now with constant current
25 parts12MIT
Questions
How big is the EBF lamp driver circuit PCB?
It measures 160 × 80 mm and has 2 copper layers, 1.6 mm thick.
What parts does the EBF lamp driver circuit use?
28 parts, built around the IRLZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EBF lamp driver circuit KiCad files?
From the cookobit/ebf_lamp repository on GitHub, at the commit this page was made from: the board is hardware/EBF_lamp_driver_circuit.kicad_pcb and its schematic hardware/EBF_lamp_driver_circuit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the EBF lamp driver circuit design in my own project?
Its repository states no licence, so its author keeps all rights: ask cookobit before reusing the design.