

Finalboard v2
The Powerglove
- Size
- 60 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 64
- Pads
- 169
- Tracks, vias
- 257, 113
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 18 Feb 2026
- Updated
- 8 May 2026
Overview
Finalboard v2 is an open-source printed circuit board by connormichalec, from the connormichalec/Universal-Gesture-Interface repository on GitHub. It is a 2-layer board of 60 × 60 mm with 45 parts on 64 nets, routed with 257 tracks and 113 vias.
It is built around the LSM6DSL and MAX7375AXR805+T. Its parts include 13 capacitors, 13 connectors, 10 resistors, 3 ICs and 1 crystal. It belongs with the STM32 boards of this library.
Main components
2LSM6DSL
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 16bit 3uA 4KB IMU (accelerometer + gyroscope) Motion event detection、Synchronization and timestamp SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps LGA-14(2.5x3) Accelerometers ROHSSTMicroelectronicsAccelerometersMAX7375AXR805+T
SC-70-40℃~+125℃ 2.7V~5.5V 6.4mA 8MHz CMOS SC-70 Programmable Oscillators ROHSMaxim Integrated (Analog Devices)Programmable Oscillators
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C8, C9, C10, C13 |
| 8 | Conn_01x02_Socket | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J2, J3, J4, J5, J7, J8, J13 |
| 5 | 47k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R5, R7, R8 |
| 4 | Conn_01x01 | TestPoint:TestPoint_Pad_1.5x1.5mm | J9, J10, J11, J12 |
| 3 | 22k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R9, R10 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C7 |
| 2 | 22 Ohm | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | 1k1, 1k2 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | Programmer1 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | LSM6DSL | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U4 |
| 1 | MAX7375AXR805 | Package_TO_SOT_SMD:SOT-323_SC-70 | Y1 |
| 1 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | Leave_Open1 |
| 1 | STM32F405RGTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | Reset1 |
| 1 | USB_Conn | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
More from connormichalec/Universal-Gesture-Interface
2- 2 layers70 × 59 mm

- 2 layers70 × 59 mm

Similar boards
- 2 layers97.2 × 110 mm

Senior Design
Stamic-kk/CyberBall-Showdown-The-Ultimate-PVR-Foosball
Purdue ECE Senior Design. A Player vs. Robot foosball table consists of ball tracking, trajectory computation, and motion control.
44 parts3MIT - 2 layers146.1 × 101.6 mm

- 4 layers80 × 40 mm

Tuner time
SG295/ece477_guitartuner
Automatic Guitar Tuner Project for ECE477 (Senior Design) @ Purdue University
112 parts2 - 4 layers27.5 × 83.3 mm

- 2 layers100.3 × 100.3 mm

- 2 layers115.3 × 171.5 mm

PurdueFall2023ECE477Team2
AdenKoperczak/PurdueFall2023ECE477Team2
Code and other files for a portable Skee-Ball Machine
140 parts - 2 layers100 × 100 mm

- 2 layers106 × 106 mm

Questions
How big is the Finalboard v2 PCB?
It measures 60 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Finalboard v2 use?
45 parts, built around the LSM6DSL and MAX7375AXR805+T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Finalboard v2 KiCad files?
From the connormichalec/Universal-Gesture-Interface repository on GitHub, at the commit this page was made from: the board is PCBs/finalboard/V2/finalboard_v2.kicad_pcb and its schematic PCBs/finalboard/V1/finalboard_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Finalboard v2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask connormichalec before reusing the design.