2 layers89 × 100 mm
Hub16
joshajohnson/Hub16
A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!
132 parts388
2 layers306.8 × 98.5 mm
60pc pcb.kicad v1.1 pcb
Connor-Devitt/60pc_Mechanical_Keyboard1560% size keyboard including PCB, frame, and firmware.
- Size
- 306.8 × 98.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 158
- Nets
- 105
- Pads
- 856
- Tracks, vias
- 1,109, 54
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 1 Feb 2018
- Updated
- 29 Jun 2018
Overview
60pc pcb.kicad v1.1 pcb is an open-source printed circuit board by Connor-Devitt, from the Connor-Devitt/60pc_Mechanical_Keyboard repository on GitHub. It is a 2-layer board of 306.8 × 98.5 mm with 158 parts on 105 nets, routed with 1,109 tracks and 54 vias.
It is built around the ATMEGA32U4. Its parts include 69 switches, 68 diodes, 9 capacitors, 4 resistors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.md60pc_Mechanical_Keyboard
60% size mechanical keyboard design including PCB, frame, firmware.
The PCB (kiCAD)
- PCB uses a 60% keyboard layout
- Footprints for Cherry MX and clones.
- Microcontroller is ATmega32u4.
- Interfaces to PC over USB micro.
The Frame (Inventor 2018)
- Made out of sheet aluminum
- Cutouts for cherry style stabilizers
- Approximatly 5 degree slope
Versions
Version 1.0: Initial release Version 1.1: Smaller form factor and improved differential routing
Pictures (v1.0)
Parts
158| Qty | Value | Footprint | References |
|---|---|---|---|
| 68 | D | keyboard_parts:D_SOD123_axial | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D21, D22, D23, D24 +52 |
| 57 | KEYSW | keebs:Mx_Alps_100 | K1, K12, K13, K14, K15, K16, K17, K18, K19, K21, K22, K23, K24, K26, K27, K28 +41 |
| 4 | 0.1u | Capacitors_SMD:C_0805_HandSoldering | C1, C2, C3, C4 |
| 3 | KEYSW | keebs:Mx_Alps_125 | K5, K10, K11 |
| 2 | 10k | Resistors_SMD:R_0805_HandSoldering | R1, R4 |
| 2 | 22 | Resistors_SMD:R_0805_HandSoldering | R2, R3 |
| 2 | 22p | Capacitors_SMD:C_0805_HandSoldering | C6, C7 |
| 2 | KEYSW | keebs:Mx_Alps_175 | K3, K59 |
| 2 | KEYSW | keebs:Mx_Alps_150 | K2, K67 |
| 2 | KEYSW | keebs:Mx_Alps_225 | K4, K63 |
| 1 | 10n | Capacitors_SMD:C_0805_HandSoldering | C9 |
| 1 | 1u | Capacitors_SMD:C_0805_HandSoldering | C8 |
| 1 | 4.7u | Capacitors_SMD:C_0805_HandSoldering | C5 |
| 1 | ATMEGA32U4 | Housings_QFP:TQFP-44_10x10mm_Pitch0.8mm | U1 |
| 1 | Crystal_GND24 | Crystals:Crystal_SMD_SeikoEpson_TSX3225-4pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | KEYSW | keebs:Mx_Alps_625 | K35 |
| 1 | KEYSW | keebs:Mx_Alps_200 | K66 |
| 1 | SW_PUSH | Buttons_Switches_SMD:SW_SPST_TL3342 | SW1 |
| 1 | USB_mini_micro_B | keyboard_parts:USB_miniB_hirose_5S8 | J1 |
The 153 most common of 158 parts.
Questions
How big is the 60pc pcb.kicad v1.1 pcb PCB?
It measures 306.8 × 98.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 60pc pcb.kicad v1.1 pcb use?
158 parts, built around the ATMEGA32U4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 60pc pcb.kicad v1.1 pcb KiCad files?
From the Connor-Devitt/60pc_Mechanical_Keyboard repository on GitHub, at the commit this page was made from: the board is HW/PCB/60pc_pcb.kicad_v1.1_pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 60pc pcb.kicad v1.1 pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask Connor-Devitt before reusing the design.
Similar boards
- 2 layers22.9 × 36.7 mm
Usb2usb
tmk/USB2USB_Converter
USB to USB keyboard protocol converter supported by TMK keyboard firmware
26 parts152 - 2 layers303.6 × 96.1 mm
- 2 layers114.9 × 77 mm
- 2 layers444.1 × 151.2 mm
Gh80-3003
evyd13/gh80-series
GH80-1800, GH80-3700 and GH80-3003 by Evy (aka anykeys.eu)
287 parts69CC-BY-SA-4.0 - 2 layers232.2 × 76.7 mm
- 2 layers373.2 × 131.8 mm
- 2 layers17.8 × 33 mm
