Skip to the content
2 layers31.8 × 35.6 mmH bridge driver, the printed circuit board in 3D

The PCM has a mikroBUS socket that works with Espoir, our Power over Ethernet devboard, to provide remote control, as well as advanced functionalities through node-red and Home Assistant.

Size
31.8 × 35.6 mm
Copper layers
2
Thickness
0.3 mm
Parts
39
Nets
32
Pads
147
Tracks, vias
291, 214
Pours
5
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
18 Jan 2023
Updated
9 Jul 2023

Overview

H bridge driver is an open-source printed circuit board by Connaxio, from the Connaxio/production-controller-makroshield repository on GitHub. It is a 2-layer board of 31.8 × 35.6 mm with 39 parts on 32 nets, routed with 291 tracks and 214 vias.

It is built around the A4957SESTR-T, RMCF0402FT75R0 and RMCF0402FT12K4, with the PJD40N04_L2_00001, ESK226M100AE3AA and CL31A106KAHNNNE among its other parts. Its parts include 13 resistors, 8 capacitors, 6 fuses, 5 transistors and 3 connectors. It belongs with the interfaces and adapters boards of this library.

Main components

10

README

README.md

Production Controller makroShield

The Production Controller makroShield (PCM) is a modular controller designed to operate 24 V devices with the help of connected and remote sensors.

The PCM has a mikroBUS socket that works with Espoir, our Power over Ethernet devboard, to provide remote control, as well as advanced functionalities through node-red and Home Assistant. Simpler control can be achieved by directly programming Espoir.

Originally designed to operate greenhouses and irrigation valves, it can be adapted to many different kinds of small productions and climate control due to its modular nature.

2 drivers are available with the PCM: a 2-ways driver for bidirectional motors, and a 1-way, AC/DC controller for other devices, like valves, fans, and unidirectional motors. Up to 15 drivers can be connected simultaneously, and scheduled to use up to 350 Watts of power at a time.

Being modular makes the PCM easy to repair and upgrade, and helps reduce cost for smaller operations.

Parts

39
QtyValueFootprintReferences
7RES_226Ω_1%_0402connaxio-resistors:RES_0402_1005MR3, R6, R8, R9, R11, R12, R13
5CAP_CER_100NF_25V_0402connaxio-capacitors:CAP_CER_0402_1005MC1, C3, C4, C5, C6
5FID_1X1connaxio-mechanical:FID_1X1F2, F3, F4, F5, F6
5RES_12.4KΩ_1%_0402connaxio-resistors:RES_0402_1005MR1, R2, R4, R7, R10
4TRX_NMOS_PJD40N04_L2_00001connaxio-sop:TO-252-3Q2, Q3, Q4, Q5
2LOGOLOGOG***, G***
1CAP_AE_22UF_100V_TH_6.3MMconnaxio-capacitors:CAP_AE_RAD_D6.3_H12.5_P2.5C2
1CAP_CER_10UF_25V_1206connaxio-capacitors:CAP_CER_1206_3216MC8
1CAP_CER_1UF_25V_0603connaxio-capacitors:CAP_CER_0603_1608MC7
1CON_HDR_100MILS_F_TH_2X8connaxio-connectors:CON_HDR_100MILS_F_TH_2X8J1
1CON_HDR_100MILS_M_TH_1X3connaxio-connectors:CON_HDR_100MILS_M_TH_1X3J2
1CON_TERM_BLK_1X2_TB008A-508-02BEconnaxio-connectors:CON_TERM_BLK_1X2_TB008A-508-02BEJ3
1DIO_LED_GREEN_150060GS75000connaxio-diodes:LED_0603_1608MD1
1DRV_A4957SESTR-Tconnaxio-fp:QFN-24_4x4_P0.5_EP2.7X2.7U1
1FUS_BLADE_MINI_3588-1connaxio-connectors:FUS_BLADE_MINI_3588-1F1
1RES_5.10KΩ_1%_0402connaxio-resistors:RES_0402_1005MR5
1TRX_2NPN_BC846S,115connaxio-sop:SOT-363_SC-70-6Q1

More from Connaxio/production-controller-makroshield

2
  • 2 layers165.1 × 204 mmProduction controller makroshield, the printed circuit board in 3D

    Production controller makroshield

    Connaxio/production-controller-makroshield

    The PCM has a mikroBUS socket that works with Espoir, our Power over Ethernet devboard, to provide remote control, as well as advanced functionalities through node-red and Home Assistant.

    120 parts
  • 2 layers28.6 × 35.6 mmSimple switch, the printed circuit board in 3D

    Simple switch

    Connaxio/production-controller-makroshield

    The PCM has a mikroBUS socket that works with Espoir, our Power over Ethernet devboard, to provide remote control, as well as advanced functionalities through node-red and Home Assistant.

    30 parts

Similar boards

  • 4 layers50.8 × 61 mmEspoir, the printed circuit board in 3D

    Espoir

    kitspace-test-repos/kicad6-file-collection

    101 partsMIT
  • 6 layers57 × 25.9 mmR7FS7MOD, the printed circuit board in 3D

    R7FS7MOD

    Brazil-L/Lumeward-OpenSource

    Open-source Lumeward firmware and development tools

    228 parts2Apache-2.0
  • 4 layers21.7 × 89.8 mmEuroPlatvorm, the printed circuit board in 3D

    EuroPlatvorm

    nanassound/eurorack-nanassound

    Eurorack modules of Nanas Sound

    34 parts27
  • 2 layers238 × 114 mmPanel, the printed circuit board in 3D

    Panel

    sbarisic/MagMouse

    Open source hall-effect based mouse - no mechanical contacts - no failure points

    384 parts2
  • 2 layers126.1 × 134.7 mmBattery test board, the printed circuit board in 3D

    Battery test board

    oresat/oresat-battery-testing

    Battery testing software and circuitry for testing cells and batteries to fly on the ISS

    80 parts1GPL-3.0
  • 2 layers54 × 27 mmTI MSPM0, the printed circuit board in 3D

    TI MSPM0

    cashmoneyisaac/mspm0-microcontroller-pcb

    a two-layer ti mspm0g3507 board with usb-c, usb-to-uart, swd, and an i²c accelerometer. includes kicad source and manufacturing files.

    40 parts
  • 2 layers40 × 40 mmLaserDriver, the printed circuit board in 3D

    LaserDriver

    Gorgalion/LaserDriver

    MCU and current controller to drive laser.

    31 parts
  • 2 layers157.5 × 72 mmNixie tube clock, the printed circuit board in 3D

    Nixie tube clock

    mbelanger0/nixie-tube-clock

    A nixie tube clock as a final PCB design project for ENGR3430: Eclectronics at Olin College of Engineering

    145 parts

Questions

How big is the H bridge driver PCB?

It measures 31.8 × 35.6 mm and has 2 copper layers, 0.3 mm thick.

What parts does the H bridge driver use?

39 parts, built around the A4957SESTR-T, RMCF0402FT75R0, RMCF0402FT12K4 and PJD40N04_L2_00001. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the H bridge driver KiCad files?

From the Connaxio/production-controller-makroshield repository on GitHub, at the commit this page was made from: the board is h-bridge-driver/h-bridge-driver.kicad_pcb and its schematic h-bridge-driver/h-bridge-driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the H bridge driver design in my own project?

Its repository states no licence, so its author keeps all rights: ask Connaxio before reusing the design.