Skip to the content
2 layers37.3 × 18.3 mmUsbpicsetter, the printed circuit board in 3D

Small board to reset USB power periodically utilizing a small Microcontroller.

Size
37.3 × 18.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
9
Pads
30
Tracks, vias
142, 10
Pours
4
Routed
Yes
KiCad
KiCad 4
Created
20 Jul 2015
Updated
4 Oct 2015

Overview

Usbpicsetter is an open-source printed circuit board by con-f-use, from the con-f-use/usbpicrestter repository on GitHub. It is a 2-layer board of 37.3 × 18.3 mm with 11 parts on 9 nets, routed with 142 tracks and 10 vias.

Its parts include 1 capacitor, 1 resistor, 1 IC, 1 diode and 1 transistor. It belongs with the PIC boards of this library.

README

README.md

USBPicResetter

board

This is a small board and firmware for resetting USB power periodically. It utilizes a Microchip PIC10F200/202/204/206 micro controller. The board design was done in KiCad. You can order it at OSH Park in its earlier version without the improved silkscreen (three for $5 + comonent costs). The firmware can be compiled with the XC8 compiler via the MPLAB IDE. Both tools should be free as in free beer. The layout was intended to be home etched (single sided). The PIC10F200 can be had on Aliexpress for under 20 cents.

Parts

11
QtyValueFootprintReferences
1100nFCapacitors_SMD:C_0603C1
110kResistors_SMD:R_0603R1
1Femaleusbpicsetter:USB-A-S-NOSILK-FEMALEUSB_OUT1
1ICSPPin_Headers:Pin_Header_Straight_1x05P1
1Maleusbpicsetter:USB-A-PCBUSB-IN1
1PIC10FHousings_SOT-23_SOT-143_TSOT-6:SOT-23-6IC1
1PMOSHousings_SOT-23_SOT-143_TSOT-6:SOT-23Q1
1TVSw_smd_resistors:r_0402D1
1open hardwarew_logo:Logo_silk_OSHW_6x6mmLOGO1
1unethische.orgjcgb:unethi_copper_invO1
1unethische.orgjcgb:unethi_silkG***

Similar boards

  • 2 layers60 × 30 mmController, the printed circuit board in 3D

    Controller

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    11 parts3kApache-2.0
  • 2 layers103 × 30.5 mmTS Front Endcap, the printed circuit board in 3D

    TS Front Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    11 parts1.3kMIT
  • 2 layers26 × 30 mmExpansion Card, the printed circuit board in 3D

    Expansion Card

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    11 parts1.1kCC-BY-4.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    11 parts1kGPL-3.0
  • 2 layers10 × 20 mm2 connector Sensor Board, the printed circuit board in 3D

    2 connector Sensor Board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    11 parts915
  • 2 layersFet module, the printed circuit board in 3D

    Fet module

    ByteWelder/Decktility

    A handheld PC

    11 parts855CC-BY-SA-4.0
  • 2 layers47 × 33 mmSevensegment led display module, the printed circuit board in 3D

    Sevensegment led display module

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    11 parts803MIT
  • 2 layers42.5 × 36.8 mmDevboard, the printed circuit board in 3D

    Devboard

    basilfx/TRADFRI-Hacking

    Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.

    11 parts743CC-BY-4.0

Questions

How big is the Usbpicsetter PCB?

It measures 37.3 × 18.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Usbpicsetter use?

11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Usbpicsetter KiCad files?

From the con-f-use/usbpicrestter repository on GitHub, at the commit this page was made from: the board is board/usbpicsetter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Usbpicsetter design in my own project?

Its repository states no licence, so its author keeps all rights: ask con-f-use before reusing the design.