Skip to the content
2 layers71.3 × 38 mmPower Distribution, the printed circuit board in 3D

KiCad PCB Designs

Size
71.3 × 38 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
10
Pads
77
Tracks, vias
32, 0
Pours
4
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
4 Mar 2020
Updated
4 May 2026

Overview

Power Distribution is an open-source printed circuit board by computergeek1507, from the computergeek1507/KiCad_Designs repository on GitHub. It is a 2-layer board of 71.3 × 38 mm with 15 parts on 10 nets, routed with 32 tracks and 0 vias.

Its parts include 8 fuses and 2 connectors.

README

Power_Breakout_Fused2/README.md

Copyright and Disclaimer

Copyright: Scott Hanson

This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.

You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions

Fused Power Breakout

Power Fused Breakout Board for HP Power Supply

Image of Power Breakout

Parts

15
QtyValueFootprintReferences
83544-2_SM3544-2:FUSE_3544-2F1, F2, F3, F4, F5, F6, F7, F8
3MountingHole_PadMountingHole:MountingHole_3.5mm_Pad_ViaH2, H3, H4
1GND OutConnector_Phoenix_MC_HighVoltage:PhoenixContact_MCV_1,5_8-G-5.08_1x08_P5.08mm_VerticalJ2
1PWR OutConnector_Phoenix_MC_HighVoltage:PhoenixContact_MCV_1,5_8-G-5.08_1x08_P5.08mm_VerticalJ1
1Power InBarrier_Blocks:BARRIER_BLOCK_1ROW_2POS_P9.5MMTB1

The 14 most common of 15 parts.

More from computergeek1507/KiCad_Designs

12
  • 2 layers142.1 × 90.8 mmESP32 Shift Test, the printed circuit board in 3D

    ESP32 Shift Test

    computergeek1507/KiCad_Designs

    KiCad PCB Designs

    96 parts10
  • 2 layers84.8 × 88.1 mmESP32 Controller, the printed circuit board in 3D

    ESP32 Controller

    computergeek1507/KiCad_Designs

    KiCad PCB Designs

    44 parts10
  • 2 layers67.8 × 64 mmPicoDMXStepper, the printed circuit board in 3D

    PicoDMXStepper

    computergeek1507/KiCad_Designs

    KiCad PCB Designs

    38 parts10
  • 2 layers85.1 × 89.9 mmESP32 Controller, the printed circuit board in 3D

    ESP32 Controller

    computergeek1507/KiCad_Designs

    KiCad PCB Designs

    34 parts10
  • 2 layers85.5 × 40.3 mmPower Breakout, the printed circuit board in 3D

    Power Breakout

    computergeek1507/KiCad_Designs

    KiCad PCB Designs

    32 parts10
  • 2 layers85.1 × 91.6 mmLoLin Pro Controller, the printed circuit board in 3D

    LoLin Pro Controller

    computergeek1507/KiCad_Designs

    KiCad PCB Designs

    31 parts10
  • 2 layers47.8 × 27.7 mmESP Switch, the printed circuit board in 3D

    ESP Switch

    computergeek1507/KiCad_Designs

    KiCad PCB Designs

    30 parts10
  • 2 layers34.1 × 42 mmDoorbell, the printed circuit board in 3D

    Doorbell

    computergeek1507/KiCad_Designs

    KiCad PCB Designs

    25 parts10
  • 2 layers84.5 × 59 mmPower Distribution, the printed circuit board in 3D

    Power Distribution

    computergeek1507/KiCad_Designs

    KiCad PCB Designs

    25 parts10
  • 2 layers62 × 85 mmWeather Wemos, the printed circuit board in 3D

    Weather Wemos

    computergeek1507/KiCad_Designs

    KiCad PCB Designs

    25 parts10
  • 2 layers63.4 × 85 mmWeather ESP32, the printed circuit board in 3D

    Weather ESP32

    computergeek1507/KiCad_Designs

    KiCad PCB Designs

    24 parts10
  • 2 layers65 × 56 mmPiHat, the printed circuit board in 3D

    PiHat

    computergeek1507/KiCad_Designs

    KiCad PCB Designs

    20 parts10

Similar boards

  • 2 layers19 × 76 mmSub, the printed circuit board in 3D

    Sub

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    15 parts3kApache-2.0
  • 2 layers26.7 × 62.2 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    15 parts1kGPL-3.0
  • 2 layers100 × 44 mmVideoslot, the printed circuit board in 3D

    Videoslot

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    15 parts1k
  • 2 layers91 × 51 mmBusinessCard, the printed circuit board in 3D

    BusinessCard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    15 parts915
  • 2 layers24.3 × 57.9 mmFlosspods pro flex, the printed circuit board in 3D

    Flosspods pro flex

    kenp-io/not-for-airpods-repairs

    The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.

    15 parts609WTFPL
  • 2 layers20.3 × 15.2 mmL0 Load, the printed circuit board in 3D

    L0 Load

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    15 parts546MIT
  • 2 layers68 × 50 mmEleLab v2 PowerFeed, the printed circuit board in 3D

    EleLab v2 PowerFeed

    Chrismettal/EleLab_v2

    Cheap DIY lab system for hobbyists and the tinkering folk

    15 parts531GPL-3.0
  • 2 layers50.8 × 35.6 mmInterface, the printed circuit board in 3D

    Interface

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    15 parts454

Questions

How big is the Power Distribution PCB?

It measures 71.3 × 38 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Power Distribution use?

15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Power Distribution KiCad files?

From the computergeek1507/KiCad_Designs repository on GitHub, at the commit this page was made from: the board is Power_Distribution/Power_Distribution.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Power Distribution design in my own project?

Its repository states no licence, so its author keeps all rights: ask computergeek1507 before reusing the design.