

Kulp EEPROM
KiCad PCB Designs
- Size
- 13.1 × 11 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 6
- Pads
- 20
- Tracks, vias
- 38, 3
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 4 Mar 2020
- Updated
- 4 May 2026
Overview
Kulp EEPROM is an open-source printed circuit board by computergeek1507, from the computergeek1507/KiCad_Designs repository on GitHub. It is a 2-layer board of 13.1 × 11 mm with 5 parts on 6 nets, routed with 38 tracks and 3 vias.
It is built around the 24LC256T-I/SN and RC0603JR-074K7L. Its parts include 2 resistors, 1 capacitor, 1 IC and 1 connector.
Main components
2README
Power_Breakout_Fused2/README.mdCopyright and Disclaimer
Copyright: Scott Hanson
This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.
You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions
Fused Power Breakout
Power Fused Breakout Board for HP Power Supply

Parts
5More from computergeek1507/KiCad_Designs
12- 2 layers142.1 × 90.8 mm

- 2 layers84.8 × 88.1 mm

- 2 layers67.8 × 64 mm

- 2 layers85.1 × 89.9 mm

- 2 layers85.5 × 40.3 mm

- 2 layers85.1 × 91.6 mm

- 2 layers47.8 × 27.7 mm

- 2 layers34.1 × 42 mm

- 2 layers84.5 × 59 mm

- 2 layers62 × 85 mm

- 2 layers63.4 × 85 mm

- 2 layers65 × 56 mm

Similar boards
- 2 layers142.1 × 106 mm

- 2 layers142.1 × 99.9 mm

- 2 layers73 × 94 mm

Sportiduino base
sportiduino/sportiduino
Electronic timing system for orienteering and similar outdoor sports events on Arduino
119 parts78GPL-3.0 - 2 layers200 × 115 mm

BMSJ
Arrow-air/project-longshot
Project Longshot documentation, designs, and project artifacts.
310 parts4CERN-OHL-S-2.0 - 4 layers53.5 × 53.5 mm

MiniTULPAR
ErdemHtyl/Tulpar_Mini_FCB
This project is under active development. The table below shows what is finished and what is still in progress:
92 partsBSD-3-Clause - 2 layers40 × 53 mm

- 4 layers53 × 35.5 mm

- 2 layers135.1 × 159.4 mm

Questions
How big is the Kulp EEPROM PCB?
It measures 13.1 × 11 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Kulp EEPROM use?
5 parts, built around the 24LC256T-I/SN and RC0603JR-074K7L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kulp EEPROM KiCad files?
From the computergeek1507/KiCad_Designs repository on GitHub, at the commit this page was made from: the board is Kulp_EEPROM/Kulp_EEPROM.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kulp EEPROM design in my own project?
Its repository states no licence, so its author keeps all rights: ask computergeek1507 before reusing the design.