4 layers16.9 × 119.4 mm
2 layers94 × 154.2 mm
Saintcon2018
compukidmike/Saintcon201817NOTE: Female headers will be provided with the main badge this year, so minbadge makers do not need to provide their own.
- Size
- 94 × 154.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 295
- Nets
- 47
- Pads
- 846
- Tracks, vias
- 1,615, 317
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Jun 2018
- Updated
- 14 Nov 2022
Overview
Saintcon2018 is an open-source printed circuit board by compukidmike, from the compukidmike/Saintcon2018 repository on GitHub. It is a 2-layer board of 94 × 154.2 mm with 295 parts on 47 nets, routed with 1,615 tracks and 317 vias.
It is built around the AP2112K-3.3TRG1. Its parts include 256 diodes, 12 connectors, 9 capacitors, 7 resistors and 5 ICs.
Main components
1README
README.mdSaintcon2018
Here's all the info you need about the 2018 Saintcon badge. You'll find badge building and flashing instructions as well as how to operate it. The Minibadges folder has info for minibadge makers.
NOTE: Female headers will be provided with the main badge this year, so minbadge makers do not need to provide their own.
Parts
295| Qty | Value | Footprint | References |
|---|---|---|---|
| 256 | LED | LED_SMD:LED_0603_1608Metric | D1, D10, D11, D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112 +240 |
| 12 | SAINTCON-Minibadge | minibadge_kicad:SAINTCON-Minibadge-Shiny | J1, J2, J3, J4, J5, J6, J7, J8, J9, J10, J11, J12 |
| 5 | 1uF | Capacitors_SMD:C_0603 | C1, C2, C9, C12, C13 |
| 4 | 4.7k | Resistors_SMD:R_0603 | R1, R2, R4, R5 |
| 3 | 0.1uF | Capacitors_SMD:C_0603 | C3, C4, C10 |
| 3 | 100k | Resistors_SMD:R_0603 | R3, R6, R7 |
| 3 | SW_Push | Buttons_Switches_SMD:SW_SPST_PTS645 | SW1, SW2, SW3 |
| 2 | IS31FL3730 | IS31FL3730:QFN-24_EP_4x4_Pitch0.5mm | U2, U3 |
| 1 | AP2112K-3.3TRG1 | TO_SOT_Packages_SMD:SOT-23-5 | U5 |
| 1 | AP22802AW5-7 | TO_SOT_Packages_SMD:SOT-23-5 | U4 |
| 1 | CP_Small | Capacitors_SMD:CP_Elec_5x5.3 | C11 |
| 1 | LOGO | Saintcon2018:BackSilk3 | G*** |
| 1 | LOGO | Saintcon2018:SCShield2 | G*** |
| 1 | LolinD32 | LolinD32:Lolin D32 | U1 |
The 294 most common of 295 parts.
Questions
How big is the Saintcon2018 PCB?
It measures 94 × 154.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Saintcon2018 use?
295 parts, built around the AP2112K-3.3TRG1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Saintcon2018 KiCad files?
From the compukidmike/Saintcon2018 repository on GitHub, at the commit this page was made from: the board is Badge/Hardware Files/KiCad Files/Saintcon2018.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Saintcon2018 design in my own project?
Its repository states no licence, so its author keeps all rights: ask compukidmike before reusing the design.
Similar boards
- 6 layers84 × 98 mm
FujiNet-5200-Rev0
FujiNetWIFI/fujinet-hardware
Schematics and design files for FujiNet hardware
145 parts142 - 2 layers25.4 × 54.5 mm
Rpi pico debugger shoe
ShawnHymel/rpi-pico-debugger-shoe
Stackable debugger board for the Raspberry Pi Pico. Solder long headers to this debugger board in order to connect the Pico to it.
49 parts84 - 4 layers83 × 109 mm
- 2 layers26 × 28 mm
- 2 layers223.5 × 160 mm
- 4 layers30 × 30 mm
- 4 layers100 × 100 mm
V25Panel
maholli/SAM32
Feather-sized SAMD51 with M4 core serving as UART bridge to WROOM ESP32
211 parts43