2 layers52 × 75 mm
Boardcomputer reinvented
bobbycar-reinvented/bobbycar-boardcomputer-reinvented
The boardcomputer reinvented!
141 parts1GPL-3.0
2 layers111 × 113.8 mm
Obs studio controller
CommanderRedYT/obs-studio-controller2DIY hardware + software to control obs studio
- Size
- 111 × 113.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 64
- Nets
- 78
- Pads
- 284
- Tracks, vias
- 727, 134
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 13 Dec 2022
- Updated
- 24 Apr 2023
Overview
Obs studio controller is an open-source printed circuit board by CommanderRedYT, from the CommanderRedYT/obs-studio-controller repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 111 × 113.8 mm with 64 parts on 78 nets, routed with 727 tracks and 134 vias.
It is built around the ESP32-WROOM-32, CH343G and USBLC6-4SC6, with the AMS1117-3.3, BAV99 and MC-311D among its other parts. Its parts include 29 resistors, 10 capacitors, 8 diodes, 5 ICs and 4 connectors. It belongs with the ESP32 boards of this library.
Main components
7
ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
CH343G
SOP-16-40℃~+85℃ 15mA 160uA 3.3V、5V 6Mbps USB 2.0 USB to UART SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
USBLC6-4SC6
SOT-23-6-55℃~+125℃ 0.3pF 15V 300W@8/20us 4.7A@8/20us 5V 6V 80nA ESD Four channels IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Unidirectional SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BAV99
SOT-231 Pair Series Connection 1.25V@150mA 100V 215mA 250mW 4A 4ns 500nA@80V SOT-23 Switching Diodes ROHSNexperiaSwitching Diodes
MC-311D
SMD-35℃~+75℃ 1 12V 16P 5A 7.35mm 8,000 times、10000 times Black Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSSOFNGUSB Connectors
WS2812
SMD5050-4P1.57mm 1000mcd 110mcd 120us 2kHz 3.7V~5.3V 300ns 320mcd 451nm 523nm 5mm 5mm 623nm 800Kbit/s Built-in power-on reset circuit、Built-in power-on reset circuit Top-mount SMD5050-4P RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)
README
kicad/obs-studio-controller/README.mdpcb
Version 0.1 (Routing complete)
Version 1.0 (PCB complete)
Version 1.1 (Fix wrong rotary encoder)
Version 1.2 (Fix flipped display header)
Version 2.0 (Actually connect the rotary encoders)
Parts
64| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 10k | Resistor_SMD:R_0402_1005Metric | R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R27, R28 |
| 6 | 1k | Resistor_SMD:R_0402_1005Metric | R4, R5, R29, R30, R31, R32 |
| 5 | 100n | Capacitor_SMD:C_0402_1005Metric | C2, C3, C5, C7, C10 |
| 4 | 100r | Resistor_SMD:R_0603_1608Metric | R6, R7, R8, R9 |
| 4 | 10u | Capacitor_SMD:C_0603_1608Metric | C1, C6, C8, C9 |
| 4 | BAV99 | Package_TO_SOT_SMD:SOT-23 | D2, D3, D4, D5 |
| 4 | RotaryEncoder_Switch | custom:SW-TH_EC11K1524406 | SW1, SW2, SW3, SW4 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D6, D7, D8 |
| 2 | 12k | Resistor_SMD:R_0402_1005Metric | R23, R24 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric | R25, R26 |
| 2 | SS8050_C2150 | Package_TO_SOT_SMD:TSOT-23 | Q2, Q3 |
| 2 | USBLC6-4SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2, U3 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | BUTTONS | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J5 |
| 1 | CH343G | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | Conn_Display | custom:DISPLAY | J4 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U1 |
| 1 | LED5V | LED_SMD:LED_0603_1608Metric | D9 |
| 1 | LEDS | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J3 |
| 1 | MC-311D | usb_c:USB-C-SMD_MC-311D | USBC1 |
| 1 | WS2812 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J7 |
Questions
How big is the Obs studio controller PCB?
It measures 111 × 113.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Obs studio controller use?
64 parts, built around the ESP32-WROOM-32, CH343G, USBLC6-4SC6 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Obs studio controller KiCad files?
From the CommanderRedYT/obs-studio-controller repository on GitHub, at the commit this page was made from: the board is kicad/obs-studio-controller/obs-studio-controller.kicad_pcb and its schematic kicad/obs-studio-controller/buttons.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Obs studio controller design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers172.5 × 392 mm
- 2 layers40 × 90 mm
Bobbycar emergency hardware
bobbycar-reinvented/bobbycar-emergency-hardware
A pcb designed to control the bobbycar in worst case scenario (dead boardcomputer)
43 parts1GPL-3.0 - 2 layers341.8 × 158.5 mm
Ws2812-clock
CommanderRedYT/ws2812-clock
A simple pcb clock using ws2812 in 7-segment form
533 parts2GPL-3.0 - 2 layers17.4 × 29.4 mm
- 2 layers50 × 50 mm
Bobbycar lora can ethernet
bobbycar-graz/Telemetry-PCB
PCB with ESP32, CANbus, microSD, GPS and LoRa
53 parts7 - 2 layers42 × 45 mm
- 2 layers341.1 × 164.7 mm
