Skip to the content
2 layersDC12v, the printed circuit board in 3D

ESP32-s3 midi controller

Copper layers
2
Thickness
1.6 mm
Parts
16
Nets
7
Pads
36
Tracks, vias
305, 0
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
18 Jun 2024
Updated
25 Aug 2026

Overview

DC12v is an open-source printed circuit board by collaborative-music-lab, from the collaborative-music-lab/ESP_MIDI repository on GitHub. It is a 2-layer board with 16 parts on 7 nets, routed with 305 tracks and 0 vias.

It is built around the B82144A2473J000, MF-R110 and TPSMF4L15A. Its parts include 7 connectors, 3 capacitors, 2 diodes, 2 fuses and 1 resistor.

Main components

3

README

README.md

ESP_MIDI

This repo contains hardware and software components for creating MIDI controllers using the ESP32-s3 microcontroller. The native USB port on the s3 allows for class-compliant MIDI devices which should be recognized natively by any computer. The repo consists of:

  1. PCB: A PCB design created in KiCad, along with PDF’s of the board and schematic
  2. Enclosure: 3d-printable faceplates and knobs
  3. Software: Arduino-based software for programming your MIDI controller Each subfolder contains its own readme with additional information for each stage

FYI / FAQS

There are several things you need to know.

Allowing for class-compliant midi

To let ESP32-s3 appear as a class compliant device, you must set the ‘USB Mode’ for the board as “USB OTG(TinyUSB)”. You can find this setting in the Arduino Tools menu.

Reprogramming after setting USB OTG

Once the board is set to USB OTG mode it won’t show up in Arduino as a Serial device. In order to reprogram the device you must manually hold down the ‘boot’ button on the ESP32-s3, and then press press and release the ‘reset’ on the ESP32-s3.

Allowing for Serial debugging

In order to use serial.print debugging, you must set “USB CDC on boot” to “enabled”. You can find this setting in the Arduino Tools menu.

Components

There are three components to this project:

  1. The PCB and electronics assembly
  2. The enclosure and mechanical elements
  3. The firmware for the ESP-32-S3

Instructions on how to complete the project are in the readme's for these three subfolders.

Parts

16
QtyValueFootprintReferences
5Conn_01x02_PinConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ2, J4, J5, J6, J7
10.1uFCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC3
11uFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC1
13300uFCapacitor_THT:CP_Radial_D16.0mm_P7.50mmC2
1B82144A2473JResistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P20.32mm_HorizontalFB1
1Barrel_Jack_Switchih_kicad:SWITCHCRAFT_PC722AJ3
1Barrel_Jack_SwitchConnector_BarrelJack:BarrelJack_HorizontalJ1
1FuseFuse:Fuseholder_Blade_Mini_Keystone_3568F3
1LEDLED_THT:LED_D5.0mmD2
1MF-R110Fuse:Fuse_Bourns_MF-RG500F1
1R_Small_USResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1
1TPSMF4L15ADiode_SMD:D_SOD-123D1

More from collaborative-music-lab/ESP_MIDI

12
  • 2 layers183 × 101 mmMbira3b, the printed circuit board in 3D

    Mbira3b

    collaborative-music-lab/ESP_MIDI

    ESP32-s3 midi controller

    43 parts20
  • 2 layers108 × 50 mmMbira, the printed circuit board in 3D

    Mbira

    collaborative-music-lab/ESP_MIDI

    ESP32-s3 midi controller

    42 parts20
  • 2 layers108 × 18 mmMbira2, the printed circuit board in 3D

    Mbira2

    collaborative-music-lab/ESP_MIDI

    ESP32-s3 midi controller

    37 parts20
  • 2 layers128 × 29 mmMbira3c, the printed circuit board in 3D

    Mbira3c

    collaborative-music-lab/ESP_MIDI

    ESP32-s3 midi controller

    36 parts20
  • 2 layers72 × 36 mmESP32MIDI2CV v2, the printed circuit board in 3D

    ESP32MIDI2CV v2

    collaborative-music-lab/ESP_MIDI

    ESP32-s3 midi controller

    33 parts20
  • 2 layers224.5 × 100 mmESP32 laptop strip, the printed circuit board in 3D

    ESP32 laptop strip

    collaborative-music-lab/ESP_MIDI

    ESP32-s3 midi controller

    27 parts20
  • 2 layers182 × 48 mmSum25 GTR, the printed circuit board in 3D

    Sum25 GTR

    collaborative-music-lab/ESP_MIDI

    ESP32-s3 midi controller

    27 parts20
  • 2 layers171 × 28 mmRobin v2 1, the printed circuit board in 3D

    Robin v2 1

    collaborative-music-lab/ESP_MIDI

    ESP32-s3 midi controller

    26 parts20
  • 2 layers97 × 38 mmESP32 laptop midi, the printed circuit board in 3D

    ESP32 laptop midi

    collaborative-music-lab/ESP_MIDI

    ESP32-s3 midi controller

    25 parts20

Similar boards

  • 2 layers100 × 100 mmTesseract, the printed circuit board in 3D

    Tesseract

    IoTCloudStudio/HW_Develop

    89 parts2
  • 2 layers50 × 40 mmLi ion battery module-, the printed circuit board in 3D

    Li ion battery module-

    Dhruv2212-star/Li-ion-battery-module-

    it protects the battery from overcharging, regulates the discharge and reverse current flow

    17 parts
  • 2 layers140.5 × 30 mmType e, the printed circuit board in 3D

    Type e

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    16 parts3kApache-2.0
  • 2 layers41.4 × 14.5 mmU2f zero, the printed circuit board in 3D

    U2f zero

    conorpp/u2f-zero

    U2F USB token optimized for physical security, affordability, and style

    16 parts2.4k
  • 2 layers122 × 37 mmV0-UmbilicalBoard, the printed circuit board in 3D

    V0-UmbilicalBoard

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    16 parts1.1kGPL-3.0
  • 2 layers152 × 57.6 mmVideoslotadapter, the printed circuit board in 3D

    Videoslotadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    16 parts1kGPL-3.0
  • 2 layers36 × 63.4 mmSmart ringfinal layout, the printed circuit board in 3D

    Smart ringfinal layout

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    16 parts915

Questions

What parts does the DC12v use?

16 parts, built around the B82144A2473J000, MF-R110 and TPSMF4L15A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the DC12v KiCad files?

From the collaborative-music-lab/ESP_MIDI repository on GitHub, at the commit this page was made from: the board is PCB/Kicad/power/DC12v/DC12v.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the DC12v design in my own project?

Its repository states no licence, so its author keeps all rights: ask collaborative-music-lab before reusing the design.