

Din5-null modem
Stuff I write for my Apple //c
- Size
- 55.6 × 21.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 5
- Pads
- 23
- Tracks, vias
- 27, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 2 Dec 2022
- Updated
- 5 Nov 2026
Overview
Din5-null modem is an open-source printed circuit board by colinleroy, from the colinleroy/a2tools repository on GitHub. It is a 2-layer board of 55.6 × 21.5 mm with 5 parts on 5 nets, routed with 27 tracks and 0 vias.
Its parts include 2 connectors and 2 switches.
README
README.mdRepository of stuff I write for my Apple //c
I'm having fun with this antiquity like it's 1989*!
The Apple //c was my first computer and I loved it dearly for years, but to be honest, it served little purpose these last years, only decorating the office. But then my wife woke up a monster by suggesting we do the Advent of Code, and we started, and then I thought
"I should do it with the Apple //c!"
One thing led to another and there are now quite a few things here:
- a full featured Mastodon client (homepage)
- a media player (mp3, video, webradios, ...) (homepage)
- a Peertube and Youtube client (homepage)
- a Shufflepuck clone, with two-players mode (homepage)
- a Glider clone (homepage)
- a Quicktake program, to get and view pictures from Quicktake cameras (homepage)
- an FTP client
- a Telnet client
- an HomeAssistant frontend to control switches, heating, and view sensors' graphs.
Building the Apple II programs
Install cc65:
git clone https://github.com/cc65/cc65.git
cd cc65
make
sudo make installBuild my things:
makeCreate floppy images:
make distYou can then transfer the images in dist/ using ADTPro, or putting them on a MicroSD card for your modern storage (BurgerDisk, DominoDisk, FloppyEmu, etc).
Building only the proxy
To build only the proxy, you can skip installing cc65. Install the build dependancies, then compile the proxy:
Notes
The Apple 2 serial port is port 2 by default.
Raspberry installation
For convenience, a pre-built surl-server is configured in the Raspberry image file, surl-server-bullseye-YYYY-MM-DD-lite.img.gz , available in the releases.
Copy it to a microSD card:
gunzip surl-server-bullseye-YYYY-MM-DD-lite.img.gz
dd if=surl-server-bullseye-YYYY-MM-DD-lite.img of=/dev/mmcblk0 bs=4M status=progress
syncInstall the SD card into a Raspberry, connect Ethernet, connect USB/serial adapter and boot. Everything should be up and running if you have a DHCP server.
You can ssh into the pi with the default Raspbian login, pi/raspberry. The Pi should get on the network as surl-server.local.
If you already have a running Raspberry that you'd want to use for this, you can instead add the following source and packages:
echo "deb https://apt-rpi.colino.net/debian bullseye main" | tee -a /etc/apt/sources.list.d/apt-rpi-colino-net.list
curl https://apt-rpi.colino.net/gpg.key | apt-key add -
apt update
apt install surl-server*Yes, I know it's older than that. But I got mine in 1989, when I was nine.
Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | ~ | DIN5:CONN-TH_DIN-504-M10 | K1, K2 |
| 1 | DTR/RTS Straight/cross | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J3 |
| 1 | TX/RX Straight/cross | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J2 |
The 4 most common of 5 parts.
More from colinleroy/a2tools
8- 2 layers193 × 113 mm

- 2 layers65 × 56 mm

- 2 layers35.1 × 27.3 mm

- 2 layers35.1 × 27.3 mm

- 2 layers53.3 × 27.3 mm

- 2 layers24.5 × 54.2 mm

- 2 layers40.9 × 53 mm

- 2 layers14.2 × 25 mm

Similar boards
- 2 layers98 × 27 mm

- 2 layers21 × 33 mm

24g2usb pico2w
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
5 parts1.7kApache-2.0 - 2 layers53.2 × 59.6 mm

A10 OLinuXino Lime Rev B SHIELD TEMPLATE
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
5 parts1.5k - 2 layers30 × 11 mm

Main control board servo tester
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
5 parts1.1k - 2 layers78.8 × 35.3 mm

KiCadTest
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
5 parts915 - 2 layers50 × 23 mm

- 2 layers43.2 × 28.5 mm

- 2 layers20.3 × 15.2 mm

L0 light sensor
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
5 parts546MIT
Questions
How big is the Din5-null modem PCB?
It measures 55.6 × 21.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Din5-null modem use?
5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Din5-null modem KiCad files?
From the colinleroy/a2tools repository on GitHub, at the commit this page was made from: the board is PCBs/din5-null-modem/din5-null-modem.kicad_pcb and its schematic PCBs/db25-din5-adapter/db25-din5-adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Din5-null modem design in my own project?
Its repository states no licence, so its author keeps all rights: ask colinleroy before reusing the design.