6 layers60 × 100 mm
2 layers
DSP V0 1
CoderCallender/DSP_ProjectsDigital Signal Processing Hardware and Firmware
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 170
- Nets
- 233
- Pads
- 779
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 9 Jun 2024
- Updated
- 8 Dec 2024
Overview
DSP V0 1 is an open-source printed circuit board by CoderCallender, from the CoderCallender/DSP_Projects repository on GitHub. It is a 2-layer board with 170 parts on 233 nets.
It is built around the STM32H723ZGT6, USB3318C-CP-TR and CS4270-CZZ, with the IS25LP080D-JNLE-TR, IS42S16800F-6BL and TLV76733QWDRBRQ1 among its other parts. Its parts include 72 capacitors, 54 resistors, 20 diodes, 14 ICs and 6 connectors. It belongs with the STM32 boards of this library.
Main components
12
STM32H723ZGT6
LQFP-144(20x20)-40℃~+85℃ 1.71V~3.6V 114 12bit 12bit、16bit 1MB 32 Bit 550MHz 564KB ARM Cortex-M7 Built-in FLASH LQFP-144(20x20) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
USB3318C-CP-TR
QFN-24(4x4)-40℃~+85℃ 1.6V~2V、3V~3.6V 25uA 480Mbps 5.5mA Transceiver USB 2.0、USB 1.1 QFN-24(4x4) USB Converters ROHSMicrochip TechnologyUSB Converters
CS4270-CZZ
TSSOP-24-10℃~+70℃ 3.1V~5.25V 4kHz~216kHz Encoder/decoder Serial TSSOP-24 Audio Interface ICs ROHSCirrus LogicAudio Interface ICs
IS25LP080D-JNLE-TR
SOIC-8-40℃~+105℃ 100,000 cycles 133MHz 2.3V~3.6V 20 Years 200us 8Mbit 8uA Hardware write protection、Software write protection、Write enable latch SPI SOIC-8 NOR FLASH ROHSISSINOR FLASH
IS42S16800F-6BL
TFBGA-54(8x8)-40℃~+105℃ 128Mbit 166MHz 3.3V High-speed clock synchronization、Auto precharge、Automatic column address generation、Auto refresh TFBGA-54(8x8) SDRAM ROHSISSISDRAM
TLV76733QWDRBRQ1
SON-8(3x3)-40℃~+125℃@(Tj) 1 1.4V@(1A) 16V 1A 3.3V 60uVrms 70dB@(1kHz) 95uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection、Output discharge、Built-in soft-start Positive SON-8(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
MBAST105SB7104KFNA01
0402100nF 25V X7R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSTaiyo YudenMultilayer Ceramic Capacitors MLCC - SMD/SMT
PESD3V3Z1BSFYL
DSN0603-2-40℃~+125℃ 0.28pF 1 1nA 3.3V 5.3V 6.9V 9.5A@8/20us Bidirectional ESD IEC 61000-4-2 DSN0603-2 ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)
CL32B226MOJNNNE
121016V 22uF X7R ±20% 1210 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT
BLM18KG121TN1D
06031 120Ω@100MHz 30mΩ 3A ±25% 0603 Ferrite Beads ROHSMurataFerrite Beads
CL21B106KOQNNNG
080510uF 16V X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT
PMEG4030ER
SOD-1231 Independent 100uA@40V 3A 40V 50A 540mV@3A SOD-123 Schottky Diodes ROHSNexperiaSchottky Diodes
Parts
170| Qty | Value | Footprint | References |
|---|---|---|---|
| 37 | 100n | Capacitor_SMD:C_01005_0402Metric_Pad0.57x0.30mm_HandSolder | C1, C2, C10, C11, C12, C13, C14, C15, C16, C19, C21, C22, C23, C24, C25, C26 +21 |
| 12 | 33R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R19, R26 |
| 12 | PESD3V3Z1BSFYL | Chase_Diode:PMEG3005AESFYL | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 9 | 22u | Capacitor_SMD:C_1210_3225Metric | C45, C46, C47, C48, C49, C50, C51, C52, C68 |
| 8 | 2u2 | Capacitor_SMD:C_01005_0402Metric_Pad0.57x0.30mm_HandSolder | C17, C18, C20, C30, C32, C34, C42, C43 |
| 6 | 1M | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R37, R40, R41, R44, R45, R51 |
| 6 | 47k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R21, R33, R34, R35, R46, R50 |
| 6 | 47k | Resistor_SMD:R_01005_0402Metric | R13, R14, R15, R16, R17, R18 |
| 5 | 10K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R29, R30, R31, R49, R54 |
| 5 | 5k1 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R22, R23, R24, R25 |
| 5 | ESD5Z5.0T1G/T5G | Diode_SMD:D_SOD-523 | D13, D17, D18, D19, D20 |
| 5 | TLV9161IDBVR | Chase_Diode:SOT95P280X145-5N | U8, U9, U10, U11, U12 |
| 4 | 100R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R38, R42, R48, R53 |
| 4 | 10n | Capacitor_SMD:C_0402_1005Metric | C54, C59, C65, C70 |
| 4 | 10u | Capacitor_SMD:C_0603_1608Metric | C55, C60, C66, C71 |
| 4 | 1K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R39, R43, R47, R52 |
| 4 | 220p | Capacitor_SMD:C_0402_1005Metric | C56, C57, C61, C62 |
| 3 | 120R | Inductor_SMD:L_0603_1608Metric | FB1, FB2, FB3 |
| 2 | 0R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R32 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C37, C39 |
| 2 | 1n | Capacitor_SMD:C_0402_1005Metric | C67, C72 |
| 2 | 2k2 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R27, R28 |
| 2 | 2u2 | Chase_Capacitor:CAPAE430X550N | C40, C41 |
| 2 | 53048-0410 | Chase_Conn:530480410 | J5, J6 |
| 2 | PMEG4030ER | Diode_SMD:Nexperia_CFP3_SOD-123W | D14, D15 |
| 1 | 10R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R36 |
| 1 | 53048-0310 | Chase_Conn:SHDRRA3W35P0X125_1X3_550X550X350P | J4 |
| 1 | 8k06 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R20 |
| 1 | CS4270 | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U4 |
| 1 | Conn_ARM_SWD_TagConnect_TC2030 | Connector:Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_Vertical | J1 |
| 1 | ECS-2520MV-130-BN-TR | Oscillator:Oscillator_SMD_ECS_2520MV-xxx-xx-4Pin_2.5x2.0mm | X1 |
| 1 | ESD5Z12T1G/T5G | Diode_SMD:D_SOD-523 | D16 |
| 1 | IS25LP080D-JNLE-TR | Chase_mem_Flash:SOIC127P600X175-8N | IC1 |
| 1 | IS42S16800F-6BL | Chase_mem_RAM:BGA54C80P9X9_800X800X120 | U2 |
| 1 | Micro_SD_Card_Det2 | Connector_Card:microSD_HC_Molex_104031-0811 | J2 |
| 1 | NCP718ASN180T1G | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | NCP718BSN500T1G | Package_TO_SOT_SMD:SOT-23-5 | U7 |
| 1 | NX3DV42GU,115 | Chase_Analog_SW:QFN40P140X180X50-10N | IC2 |
| 1 | STM32H723ZGT6 | Package_QFP:LQFP-144_20x20mm_P0.5mm | U1 |
| 1 | TLV76733QWDRBRQ1 | Chase_LDO:SON65P300X300X100-9N-D | U5 |
| 1 | USB3318C-CP-TR | Chase_USB:QFN50P400X400X100-25N-D | U3 |
| 1 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_Molex_105450-0101 | J3 |
Questions
What parts does the DSP V0 1 use?
170 parts, built around the STM32H723ZGT6, USB3318C-CP-TR, CS4270-CZZ and IS25LP080D-JNLE-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DSP V0 1 KiCad files?
From the CoderCallender/DSP_Projects repository on GitHub, at the commit this page was made from: the board is DSP_V0_1/DSP_V0_1.kicad_pcb and its schematic Basic_DSP_V0_1/Analogue.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DSP V0 1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask CoderCallender before reusing the design.
More from CoderCallender/DSP_Projects
1Similar boards
- 4 layers25 × 36.5 mm
MAX M10S Passive
John-owo/pcb-agent-workflow
用 Claude Code／Codex 搭配 KiCad 10 設計 PCB、交 JLCPCB 製造的工作流程：流程文件、專案範本、JLC 客服溝通 skill、生產稿比對腳本與範例設計
24 parts76MIT - 2 layers87.4 × 70 mm
- 6 layers132.1 × 107.9 mm
Zx50 MemoryCard RevC1
mmosko/Zx50
This is the primary CPU board for the Zx50 8-slot passive backplane system. It hosts the Z80 microprocessor (running at 5 MHz to 10 MHz) and acts as the master controller for the primary bus.
235 parts - 4 layers74.5 × 70.3 mm
Nest mini v2-drop in pcb
iMike78/nest-mini-drop-in-pcb
Drop-in PCB replacement for the Google Nest Mini v2 with ESP32-S3, ESP32-P4 and optional ESP32-C6. Inspired by Onju Voice and Home Assistant Voice PE.
229 parts628CERN-OHL-S-2.0 - 4 layers42 × 55.8 mm
P3-cellular module
themainframe/p3-cellular-module
CAD/CAM for a GPD Pocket 3 Cellular Module
54 parts14 - 2 layers102 × 103 mm
- 4 layers50 × 50 mm
Kamikaze drone
Prachannagven/stm32f765-facial-detection
A project built around the STM32F765VIT6 chip to perform basic facial detection and to act as a flight controller for a micro drone.
92 parts1 - 2 layers74 × 72 mm
Iso usb2pwrd panel
qfreiman/iso-usb2pwrd
compact USB-C 2.0 Isolator with 1W Power Passthrough
204 parts