Skip to the content
4 layers63.6 × 35.6 mmSTM32-Breakout Board, the printed circuit board in 3D
Size
63.6 × 35.6 mm
Copper layers
4
Thickness
1.6 mm
Parts
29
Nets
52
Pads
154
Tracks, vias
274, 16
Pours
6
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
25 Jul 2026
Updated
8 Aug 2026

Overview

STM32-Breakout Board is an open-source printed circuit board by codemasterkem858, from the codemasterkem858/STM32-Breakout-Board repository on GitHub. It is a 4-layer board of 63.6 × 35.6 mm with 29 parts on 52 nets, routed with 274 tracks and 16 vias.

It is built around the STM32L443CCT6. Its parts include 13 capacitors, 2 resistors, 2 ICs, 2 connectors and 1 diode. It belongs with the interfaces and adapters and microcontroller boards boards and the STM32 boards of this library.

Main components

1

README

README.md

STM32-Breakout-Board

Parts

29
QtyValueFootprintReferences
5100nCapacitor_SMD:C_0402_1005MetricC1, C2, C3, C4, C9
4MountingHoleMountingHole:MountingHole_2.5mmH1, H2, H3, H4
210pCapacitor_SMD:C_0402_1005MetricC10, C11
21k5Resistor_SMD:R_0402_1005MetricR1, R4
21uCapacitor_SMD:C_0603_1608MetricC7, C8
222uCapacitor_SMD:C_0805_2012MetricC12, C13
2Conn_01x20_PinConnector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_VerticalJ2, J3
110nCapacitor_SMD:C_0402_1005MetricC6
110uCapacitor_SMD:C_0805_2012MetricC5
1120RInductor_SMD:L_0603_1608MetricFB1
1Crystal_GND24Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
1LOGOLOGOG***
1MCP1799T-3302H/DBBBSTM32_pcblib:SOT-223 bU2
1REDLED_SMD:LED_0603_1608MetricD1
1SW_SPDTButton_Switch_SMD:SW_SPDT_PCM12BOOT
1USB_B_MicroConnector_USB:USB_Micro-B_Wuerth_629105150521USB
1stm32l443cct6BBSTM32_pcblib:LQFP48U1

Similar boards

  • 4 layers28.4 × 47.9 mmEasyduino ESP32, the printed circuit board in 3D

    Easyduino ESP32

    Hanqaqa/Easyduino

    Easily dive into different PCB KiCad designs of the most popular microcontroller devboards

    29 parts755CERN-OHL-P-2.0
  • 4 layers63.5 × 21 mmNard sam, the printed circuit board in 3D

    Nard sam

    killergeek/nard

    nard a dual sim/sam card interface for the flipper zero

    29 parts108MIT
  • 4 layers36.8 × 38.1 mmCm4 ipad display adapter, the printed circuit board in 3D

    Cm4 ipad display adapter

    EvanKrall/pipad

    A PCB for putting a Raspberry Pi CM4 inside a 1st-generation iPad.

    29 parts60
  • 4 layers97 × 97 mmPCBA ZONA TOUCH, the printed circuit board in 3D

    PCBA ZONA TOUCH

    intechstudio/grid-hardware

    29 parts59GPL-3.0
  • 4 layers26.8 × 14.8 mmRpi nrf52811, the printed circuit board in 3D

    Rpi nrf52811

    alvarop/chaac

    This is a work in progress for a wireless weather station project.

    29 parts21MIT
  • 4 layers100 × 25 mmRf switch dpdt, the printed circuit board in 3D

    Rf switch dpdt

    greatscottgadgets/misc

    miscellaneous Great Scott Gadgets projects

    29 parts21GPL-2.0
  • 4 layers45 × 35.2 mmDominoDisk SMD Angled, the printed circuit board in 3D

    DominoDisk SMD Angled

    colinleroy/BurgerDisk

    A daisy-chainable Smartport hard drive for the Apple II

    29 parts20
  • 4 layers29 × 16.7 mmRam pak, the printed circuit board in 3D

    Ram pak

    esden/glasgow-addons

    Various interface addon boards and expansions for the Glasgow Digital Interface Explorer

    29 parts19

Questions

How big is the STM32-Breakout Board PCB?

It measures 63.6 × 35.6 mm and has 4 copper layers, 1.6 mm thick.

What parts does the STM32-Breakout Board use?

29 parts, built around the STM32L443CCT6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the STM32-Breakout Board KiCad files?

From the codemasterkem858/STM32-Breakout-Board repository on GitHub, at the commit this page was made from: the board is STM32-Breakout-Board/STM32-Breakout-Board.kicad_pcb and its schematic STM32-Breakout-Board/STM32-Breakout-Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the STM32-Breakout Board design in my own project?

Its repository states no licence, so its author keeps all rights: ask codemasterkem858 before reusing the design.