2 layers285 × 122.5 mm
2 layers230 × 110 mm
- Size
- 230 × 110 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 199
- Nets
- 250
- Pads
- 905
- Tracks, vias
- 406, 13
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 28 Sep 2018
- Updated
- 24 Nov 2018
Overview
Mk1 is an open-source printed circuit board by codebot, from the codebot/mini_keyboard repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 230 × 110 mm with 199 parts on 250 nets, routed with 406 tracks and 13 vias.
Its parts include 92 diodes, 89 ICs, 7 capacitors, 5 resistors and 3 connectors. It belongs with the STM32 and NXP (LPC, Kinetis, i.MX RT) boards of this library.
README
README.mdmini_keyboard
- mk1: based on Cherry ML. Unfinished
- mk2: based on Kailh 1350 low-profile "Choc"
Parts
199| Qty | Value | Footprint | References |
|---|---|---|---|
| 88 | 1N4148 | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +72 |
| 88 | CHERRY_ML | Switches:CHERRY_ML | U2, U10, U11, U12, U13, U14, U15, U16, U17, U18, U19, U20, U21, U22, U23, U24 +72 |
| 5 | 100n | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5, C6, C7 |
| 4 | 330 | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4 |
| 4 | LED_Small_ALT | LED_THT:LED_D3.0mm | D85, D86, D87, D88 |
| 2 | 12p | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 8 MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | X1 |
| 1 | BOOT | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | JTAG | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J1 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_B3U-1000P | SW2 |
| 1 | STM32F070CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J2 |
Questions
How big is the Mk1 PCB?
It measures 230 × 110 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mk1 use?
199 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mk1 KiCad files?
From the codebot/mini_keyboard repository on GitHub, at the commit this page was made from: the board is mk1/mk1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mk1 design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from codebot/mini_keyboard
2- 2 layers255 × 122.5 mm
Similar boards
- 2 layers231.1 × 106.7 mm
- 2 layers89.6 × 79 mm
TDR 5351 core
MR-DOS/TDR_diploma_thesis
Time domain reflectometer. Includes Hardware, firmware and GUI in Octave. Also a diploma thesis.
199 parts33GPL-3.0 - 2 layers342.9 × 109.6 mm
- 2 layers213.4 × 130.8 mm
Issue 4
iansbremner/ZX-Spectrum-Issue-4B-KiCAD
Recreation of the ZX Spectrum Issue 4B board in KiCAD
199 parts22 - 2 layers547.8 × 284.5 mm
Clarinoid devboard
thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure
199 parts4 - 2 layers213.1 × 130 mm
ZX Spectrum i2
liveboxandy/ZX-Spectrum-48K-Issue-2
KiCAD created files for the ZX Spectrum 48K Issue 2 designed by Sinclair Research Ltd
199 parts3CC0-1.0 - 2 layers304.8 × 133.4 mm
- 2 layers150.6 × 71.7 mm
Bms hardware
moyamartin/bms_hardware
This is the hardware design section of the BMS project. It was designed with KiCAD.
199 parts3