
Base promicro
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Small button box open source controller.
MiniFighter Lite is an open-source printed circuit board by cocoaprime, from the cocoaprime/MiniFighter-Lite repository on GitHub, published under the MIT licence. It is a 2-layer board of 200.8 × 96 mm with 30 parts on 42 nets, routed with 203 tracks and 13 vias.
It belongs with the RP2040 boards of this library.
Free to modify, use, recreate.
Parts needed :
5X M6 X 14MM Screw, not countersunk,
5X M6 Screw Bolts,
12 x MX Hotswap Sockets,
12 x MX Switches,
12 x Punk Workshop / Sinoarcade MX Keycaps, either 24 or 30mm works,
01 x BOB-15100 / Treedix USB-C Breakout board,
01 x MiniFighter Lite PCB,
01 x Minifighter Lite Switchplate,
01 x MiniFighter Lite Acrylic Switchplate (3mm),
01 x Case enclosure,
will add instructions and case design files. ignore the crack

| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | SW_SPST | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX | DOWN1, K1, K2, K3, K4, LEFT1, P1, P2, P3, P4, RIGHT1, UP1 |
| 7 | SW_SPST | Button_Switch_THT:SW_PUSH_6mm | A1, A2, L3, R3, RUN1, SELECT1, START1 |
| 6 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | M3.1, M3.2, M3.3, M3.4, M3.5, M3.6 |
| 3 | LOGO | LOGO | _, 0, O |
| 1 | Conn_01x06 | USB-C-6-PIN:treedix usb-c | USBC1 |
| 1 | Pico | Pi_Pico_W_BIG_TP_HOLE:Pi_Pico_W_BIG_TP_HOLE | U1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

tenderlove/initial-v
It's a BMW shifter converted to a Bluetooth Keyboard that you use with Vim

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 200.8 × 96 mm and has 2 copper layers, 1.6 mm thick.
30 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the cocoaprime/MiniFighter-Lite repository on GitHub, at the commit this page was made from: the board is SWITCHPLATE/MiniFighter Lite.kicad_pcb and its schematic MiniFighter Lite.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).