
Front Panel
coastalwarming/Intertidal_chamber
This repository is dedicated to the open-source device "Intertidal chamber". Here we'll deposit hardware, firmware and structural instructions.

This repository is dedicated to the open-source device "Intertidal chamber". Here we'll deposit hardware, firmware and structural instructions.
Back Panel is an open-source printed circuit board by coastalwarming, from the coastalwarming/Intertidal_chamber repository on GitHub. It is a 2-layer board of 225.6 × 150.6 mm with 174 parts on 145 nets, routed with 1,217 tracks and 273 vias.
It is built around the ESP32-S3-WROOM-1-N8, ADS7828E/250 and MCP23017-E/SS, with the MMSZ5233B among its other parts. Its parts include 74 resistors, 29 connectors, 23 capacitors, 15 transistors and 13 ICs. It belongs with the ESP32 boards of this library.
![]() | ![]() |
The Intertidal Environmental Chamber is a self-contained, automatic experimental system that simulates the intertidal environment. Using multiple chambers, researchers can create “virtual common garden experiments” across large geographic spans. The system plugs into a regular mains power outlet and controls other mains power devices (such as pumps and heaters) and 12 V (such as fans, LEDs, and water valves).
| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | 10k | lsts-passives:R_0603 | R1, R3, R4, R5, R13, R16, R19, R22, R23, R32, R38, R62, R63, R64, R65, R66 +6 |
| 21 | 100k | lsts-passives:R_0603 | R11, R12, R25, R26, R33, R34, R35, R36, R37, R39, R41, R47, R48, R53, R54, R55 +5 |
| 14 | CONN_3x1 | lsts-conn:ClampTerminals_1x3_3.81mm_Straight | P11, P14, P15, P16, P17, P18, P19, P20, P21, P22, P23, P24, P27, P28 |
| 13 | 1k | lsts-passives:R_0603 | R10, R14, R17, R20, R27, R28, R30, R31, R40, R49, R50, R51, R52 |
| 12 | 100nF | lsts-passives:C_0603 | C9, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23 |
| 10 | Fuse | lsts-devices:FUSE-HOLDER-5x20 | F1, F2, F3, F4, F5, F7, F8, F9, F10, F12 |
| 10 | NPN_EBC | lsts-discretes:SOT23_BC817 | Q1, Q2, Q3, Q4, Q5, Q8, Q9, Q11, Q14, Q18 |
| 7 | 4k7 | lsts-passives:R_0603 | R2, R29, R43, R44, R45, R46, R56 |
| 6 | 0.1uF | lsts-passives:C_0603 | C1, C2, C3, C8, C11, C12 |
| 6 | 470R | lsts-passives:R_0603 | R6, R15, R18, R21, R24, R42 |
| 5 | 0R | lsts-passives:R_0603 | R70, R71, R72, R73, R74 |
| 5 | CONN_3x1-lsts-conn | lsts-conn:Conn_3x230V_solder_Chamber | P2, P4, P9, P13, P25 |
| 5 | MOS_P | lsts-discretes:SOIC08N_IRF7425PBF | Q6, Q7, Q10, Q12, Q16 |
| 5 | SSRelay_CPC40055ST | lsts-devices:SSR_RP1A23D5 | U4, U5, U6, U7, U9 |
| 4 | CONN_3x1 | lsts-conn:Conn_3x12V_solder_Chamber | P3, P5, P8, P30 |
| 4 | DIODE | lsts-discretes:1N4448X | D1, D2, D3, D4 |
| 3 | 10uF | lsts-passives:C_0603 | C10, C24, C25 |
| 2 | 10uF | lsts-passives:C_1210 | C6, C7 |
| 2 | CONN_2x1 | lsts-discretes:Snubber_B32924 | P6, P12 |
| 2 | SW_PUSH | lsts-discretes:EVQP2 | SW1, SW2 |
| 1 | 12uH | lsts-passives:RLS126R | L1 |
| 1 | 1N4148 | lsts-discretes:SOD-123 | D9 |
| 1 | 503398-1892 | lsts-conn:uSD_503398-1892 | J1 |
| 1 | ADS7828 | lsts-ic:TSSOP-16_4.4x5mm_P0.65mm | IC2 |
| 1 | BATTERY_Keystone_3000 | lsts-devices:Keystone_3000_1x12mm-CoinCell | BT1 |
| 1 | CONN_24x1 | lsts-conn:PIN_ARRAY_12x2 | P10 |
| 1 | CONN_3x1-lsts-conn | lsts-conn:ClampTerminal_3P_5.08mm_Vertical | P1 |
| 1 | CONN_6x1 | lsts-conn:PIN_ARRAY_6x1 | P26 |
| 1 | ESP32-S3-WROOM-1 | lsts-ic:XCVR_ESP32-S3-WROOM-1U | U3 |
| 1 | IRM-30 | lsts-devices:CONV_IRM-60-12 | U1 |
| 1 | MCP23017 | lsts-ic:SOIC28W | IC1 |
| 1 | MMSZ5233B | lsts-discretes:SOD-123 | D11 |
| 1 | RV-3032-C7 | lsts-devices:RV-3028-C7 | U2 |
| 1 | Reg.3.3V 1A | lsts-devices:R-785.0-1.0 | U8 |
| 1 | Reg.5.0V 1A | lsts-devices:R-785.0-1.0 | U11 |
| 1 | hr502cd012 | lsts-discretes:12VDC_Relay_hr502cd012 | U10 |

coastalwarming/Intertidal_chamber
This repository is dedicated to the open-source device "Intertidal chamber". Here we'll deposit hardware, firmware and structural instructions.

antmicro/d1600e-psu-breakout
Breakout board for DELL D1600E-S0 Power Supply Unit

antmicro/gpu-cluster-backplane
This project contains open hardware design files for a PCB supporting power distribution in a cluster composed of GPUs. This board has been derived from an open source d1600e-psu-breakout created by Antmicro.

antmicro/ict-baseboard
PCB design for implementing In-Circuit Testing of other PCBs via an USB-enabled host

tmb5932/fixed-wing-drone
The basics needed to allow a RC plane to be turned autonomous on signal.

mattchesters/zmk-apple-desktop-bus-keyboard
ZMK shield for Apple Desktop Bus Keyboard

ZeroPhone/ZeroPhone-PCBs
PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!

ktec-hq/ErgoDone
ErgoDox using pro micro. Original work by Dox. Brainhole association present

It measures 225.6 × 150.6 mm and has 2 copper layers, 1.6 mm thick.
174 parts, built around the ESP32-S3-WROOM-1-N8, ADS7828E/250, MCP23017-E/SS and MMSZ5233B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the coastalwarming/Intertidal_chamber repository on GitHub, at the commit this page was made from: the board is Hardware/Back_Panel/Back_Panel.kicad_pcb and its schematic Hardware/Back_Panel/Back_Panel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask coastalwarming before reusing the design.